openwrt-owl/openwrt
Waldemar Brodkorb 3a71a90b79 fix flash map driver for WAP54G v1, add support for Belkin F5D7230-4 serial flash and smaller bootloader, checked on WRT54GSv1.0, WRT54Gv2.2 and Asus WL500g, so that everything still works on supported devices
SVN-Revision: 3507
2006-03-27 18:16:20 +00:00
..
docs fix documentation, fixes #176 2006-01-08 02:17:18 +00:00
package Fix dependency on libol, should close #403 2006-03-26 21:56:38 +00:00
scripts add mirror1 again. sponsored by FH BRS, Lab for telecommunications 2006-03-20 18:08:46 +00:00
target fix flash map driver for WAP54G v1, add support for Belkin F5D7230-4 serial flash and smaller bootloader, checked on WRT54GSv1.0, WRT54Gv2.2 and Asus WL500g, so that everything still works on supported devices 2006-03-27 18:16:20 +00:00
toolchain preliminary ppc support 2006-03-22 00:38:57 +00:00
.cvsignore add staging_dir_* to .cvsignore 2005-03-26 01:13:09 +00:00
Config.in make target selection nicer, choose arch automatically 2006-01-13 11:34:49 +00:00
Config.in.devel remove ser 2006-01-31 20:54:00 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile cosmetic fix 2005-10-22 19:13:35 +00:00
README pkg-config is needed for some packages 2005-09-11 18:05:09 +00:00
rules.mk change cp to $(CP) 2006-02-01 23:53:19 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The buildroot system is documented in docs/buildroot-documentation.html.

Building your own firmware you need to have access to a Linux system.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org