mirror of https://github.com/hak5/openwrt-owl.git
183 lines
4.9 KiB
Diff
183 lines
4.9 KiB
Diff
--- a/drivers/mtd/nand/nand_base.c
|
|
+++ b/drivers/mtd/nand/nand_base.c
|
|
@@ -4249,6 +4249,8 @@ static inline bool is_full_id_nand(struc
|
|
static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
|
|
struct nand_flash_dev *type, const u8 *id_data, int *busw)
|
|
{
|
|
+ int mode;
|
|
+
|
|
if (!strncmp(type->id, id_data, type->id_len)) {
|
|
mtd->writesize = type->pagesize;
|
|
mtd->erasesize = type->erasesize;
|
|
@@ -4259,8 +4261,9 @@ static bool find_full_id_nand(struct mtd
|
|
chip->options |= type->options;
|
|
chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
|
|
chip->ecc_step_ds = NAND_ECC_STEP(type);
|
|
- chip->onfi_timing_mode_default =
|
|
- type->onfi_timing_mode_default;
|
|
+
|
|
+ mode = type->onfi_timing_mode_default;
|
|
+ chip->sdr_timings = onfi_async_timing_mode_to_sdr_timings(mode);
|
|
|
|
*busw = type->options & NAND_BUSWIDTH_16;
|
|
|
|
--- a/drivers/mtd/nand/sunxi_nand.c
|
|
+++ b/drivers/mtd/nand/sunxi_nand.c
|
|
@@ -1425,7 +1425,7 @@ static int sunxi_nand_chip_init_timings(
|
|
|
|
mode = onfi_get_async_timing_mode(&chip->nand);
|
|
if (mode == ONFI_TIMING_MODE_UNKNOWN) {
|
|
- mode = chip->nand.onfi_timing_mode_default;
|
|
+ timings = chip->nand.sdr_timings;
|
|
} else {
|
|
uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
|
|
|
|
@@ -1439,9 +1439,10 @@ static int sunxi_nand_chip_init_timings(
|
|
feature);
|
|
if (ret)
|
|
return ret;
|
|
+
|
|
+ timings = onfi_async_timing_mode_to_sdr_timings(mode);
|
|
}
|
|
|
|
- timings = onfi_async_timing_mode_to_sdr_timings(mode);
|
|
if (IS_ERR(timings))
|
|
return PTR_ERR(timings);
|
|
|
|
--- a/include/linux/mtd/nand.h
|
|
+++ b/include/linux/mtd/nand.h
|
|
@@ -612,6 +612,55 @@ struct nand_buffers {
|
|
uint8_t *databuf;
|
|
};
|
|
|
|
+/*
|
|
+ * struct nand_sdr_timings - SDR NAND chip timings
|
|
+ *
|
|
+ * This struct defines the timing requirements of a SDR NAND chip.
|
|
+ * These informations can be found in every NAND datasheets and the timings
|
|
+ * meaning are described in the ONFI specifications:
|
|
+ * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
|
|
+ * Parameters)
|
|
+ *
|
|
+ * All these timings are expressed in picoseconds.
|
|
+ */
|
|
+
|
|
+struct nand_sdr_timings {
|
|
+ u32 tALH_min;
|
|
+ u32 tADL_min;
|
|
+ u32 tALS_min;
|
|
+ u32 tAR_min;
|
|
+ u32 tCEA_max;
|
|
+ u32 tCEH_min;
|
|
+ u32 tCH_min;
|
|
+ u32 tCHZ_max;
|
|
+ u32 tCLH_min;
|
|
+ u32 tCLR_min;
|
|
+ u32 tCLS_min;
|
|
+ u32 tCOH_min;
|
|
+ u32 tCS_min;
|
|
+ u32 tDH_min;
|
|
+ u32 tDS_min;
|
|
+ u32 tFEAT_max;
|
|
+ u32 tIR_min;
|
|
+ u32 tITC_max;
|
|
+ u32 tRC_min;
|
|
+ u32 tREA_max;
|
|
+ u32 tREH_min;
|
|
+ u32 tRHOH_min;
|
|
+ u32 tRHW_min;
|
|
+ u32 tRHZ_max;
|
|
+ u32 tRLOH_min;
|
|
+ u32 tRP_min;
|
|
+ u32 tRR_min;
|
|
+ u64 tRST_max;
|
|
+ u32 tWB_max;
|
|
+ u32 tWC_min;
|
|
+ u32 tWH_min;
|
|
+ u32 tWHR_min;
|
|
+ u32 tWP_min;
|
|
+ u32 tWW_min;
|
|
+};
|
|
+
|
|
/**
|
|
* struct nand_chip - NAND Private Flash Chip Data
|
|
* @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the
|
|
@@ -676,11 +725,7 @@ struct nand_buffers {
|
|
* @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds,
|
|
* also from the datasheet. It is the recommended ECC step
|
|
* size, if known; if unknown, set to zero.
|
|
- * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is
|
|
- * either deduced from the datasheet if the NAND
|
|
- * chip is not ONFI compliant or set to 0 if it is
|
|
- * (an ONFI chip is always configured in mode 0
|
|
- * after a NAND reset)
|
|
+ * @sdr_timings [INTERN] Pointer to default timings for SDR NAND.
|
|
* @numchips: [INTERN] number of physical chips
|
|
* @chipsize: [INTERN] the size of one chip for multichip arrays
|
|
* @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
|
|
@@ -769,7 +814,7 @@ struct nand_chip {
|
|
uint8_t bits_per_cell;
|
|
uint16_t ecc_strength_ds;
|
|
uint16_t ecc_step_ds;
|
|
- int onfi_timing_mode_default;
|
|
+ const struct nand_sdr_timings *sdr_timings;
|
|
int badblockpos;
|
|
int badblockbits;
|
|
|
|
@@ -1156,55 +1201,6 @@ struct ofnandpart_data {
|
|
int ofnandpart_parse(struct mtd_info *master,
|
|
const struct ofnandpart_data *data);
|
|
|
|
-/*
|
|
- * struct nand_sdr_timings - SDR NAND chip timings
|
|
- *
|
|
- * This struct defines the timing requirements of a SDR NAND chip.
|
|
- * These informations can be found in every NAND datasheets and the timings
|
|
- * meaning are described in the ONFI specifications:
|
|
- * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing
|
|
- * Parameters)
|
|
- *
|
|
- * All these timings are expressed in picoseconds.
|
|
- */
|
|
-
|
|
-struct nand_sdr_timings {
|
|
- u32 tALH_min;
|
|
- u32 tADL_min;
|
|
- u32 tALS_min;
|
|
- u32 tAR_min;
|
|
- u32 tCEA_max;
|
|
- u32 tCEH_min;
|
|
- u32 tCH_min;
|
|
- u32 tCHZ_max;
|
|
- u32 tCLH_min;
|
|
- u32 tCLR_min;
|
|
- u32 tCLS_min;
|
|
- u32 tCOH_min;
|
|
- u32 tCS_min;
|
|
- u32 tDH_min;
|
|
- u32 tDS_min;
|
|
- u32 tFEAT_max;
|
|
- u32 tIR_min;
|
|
- u32 tITC_max;
|
|
- u32 tRC_min;
|
|
- u32 tREA_max;
|
|
- u32 tREH_min;
|
|
- u32 tRHOH_min;
|
|
- u32 tRHW_min;
|
|
- u32 tRHZ_max;
|
|
- u32 tRLOH_min;
|
|
- u32 tRP_min;
|
|
- u32 tRR_min;
|
|
- u64 tRST_max;
|
|
- u32 tWB_max;
|
|
- u32 tWC_min;
|
|
- u32 tWH_min;
|
|
- u32 tWHR_min;
|
|
- u32 tWP_min;
|
|
- u32 tWW_min;
|
|
-};
|
|
-
|
|
/* get timing characteristics from ONFI timing mode. */
|
|
const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
|
|
#endif /* __LINUX_MTD_NAND_H */
|