mirror of https://github.com/hak5/openwrt-owl.git
251 lines
7.9 KiB
Diff
251 lines
7.9 KiB
Diff
diff -Nur linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S
|
|
--- linux-2.6.19.2/arch/arm/boot/compressed/head-xscale.S 2007-01-10 20:10:37.000000000 +0100
|
|
+++ linux-2.6.19.2-owrt/arch/arm/boot/compressed/head-xscale.S 2007-04-02 15:39:28.000000000 +0200
|
|
@@ -46,6 +46,11 @@
|
|
orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
|
|
#endif
|
|
|
|
+#ifdef CONFIG_MACH_GATEWAY7001
|
|
+ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff)
|
|
+ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00)
|
|
+#endif
|
|
+
|
|
#ifdef CONFIG_ARCH_IXP2000
|
|
mov r1, #-1
|
|
mov r0, #0xd6000000
|
|
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
|
|
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2007-04-02 15:39:28.000000000 +0200
|
|
@@ -0,0 +1,68 @@
|
|
+/*
|
|
+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
|
|
+ *
|
|
+ * PCI setup routines for Gateway 7001
|
|
+ *
|
|
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
|
|
+ *
|
|
+ * based on coyote-pci.c:
|
|
+ * Copyright (C) 2002 Jungo Software Technologies.
|
|
+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
|
|
+ *
|
|
+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ *
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/irq.h>
|
|
+
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/irq.h>
|
|
+
|
|
+#include <asm/mach/pci.h>
|
|
+
|
|
+extern void ixp4xx_pci_preinit(void);
|
|
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
|
|
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
|
|
+
|
|
+void __init gateway7001_pci_preinit(void)
|
|
+{
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
|
|
+ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
|
|
+
|
|
+ ixp4xx_pci_preinit();
|
|
+}
|
|
+
|
|
+static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
+{
|
|
+ if (slot == 1)
|
|
+ return IRQ_IXP4XX_GPIO11;
|
|
+ else if (slot == 2)
|
|
+ return IRQ_IXP4XX_GPIO10;
|
|
+ else return -1;
|
|
+}
|
|
+
|
|
+struct hw_pci gateway7001_pci __initdata = {
|
|
+ .nr_controllers = 1,
|
|
+ .preinit = gateway7001_pci_preinit,
|
|
+ .swizzle = pci_std_swizzle,
|
|
+ .setup = ixp4xx_setup,
|
|
+ .scan = ixp4xx_scan_bus,
|
|
+ .map_irq = gateway7001_map_irq,
|
|
+};
|
|
+
|
|
+int __init gateway7001_pci_init(void)
|
|
+{
|
|
+ if (machine_is_gateway7001())
|
|
+ pci_common_init(&gateway7001_pci);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+subsys_initcall(gateway7001_pci_init);
|
|
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c
|
|
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/gateway7001-setup.c 1970-01-01 01:00:00.000000000 +0100
|
|
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2007-04-02 15:49:28.000000000 +0200
|
|
@@ -0,0 +1,108 @@
|
|
+/*
|
|
+ * arch/arm/mach-ixp4xx/gateway7001-setup.c
|
|
+ *
|
|
+ * Board setup for the Gateway 7001 board
|
|
+ *
|
|
+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
|
|
+ *
|
|
+ * based on coyote-setup.c:
|
|
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
|
|
+ *
|
|
+ * Author: Imre Kaloz <Kaloz@openwrt.org>
|
|
+ */
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/serial.h>
|
|
+#include <linux/tty.h>
|
|
+#include <linux/serial_8250.h>
|
|
+#include <linux/slab.h>
|
|
+
|
|
+#include <asm/types.h>
|
|
+#include <asm/setup.h>
|
|
+#include <asm/memory.h>
|
|
+#include <asm/hardware.h>
|
|
+#include <asm/irq.h>
|
|
+#include <asm/mach-types.h>
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/mach/flash.h>
|
|
+
|
|
+static struct flash_platform_data gateway7001_flash_data = {
|
|
+ .map_name = "cfi_probe",
|
|
+ .width = 2,
|
|
+};
|
|
+
|
|
+static struct resource gateway7001_flash_resource = {
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct platform_device gateway7001_flash = {
|
|
+ .name = "IXP4XX-Flash",
|
|
+ .id = 0,
|
|
+ .dev = {
|
|
+ .platform_data = &gateway7001_flash_data,
|
|
+ },
|
|
+ .num_resources = 1,
|
|
+ .resource = &gateway7001_flash_resource,
|
|
+};
|
|
+
|
|
+static struct resource gateway7001_uart_resource = {
|
|
+ .start = IXP4XX_UART2_BASE_PHYS,
|
|
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
|
|
+ .flags = IORESOURCE_MEM,
|
|
+};
|
|
+
|
|
+static struct plat_serial8250_port gateway7001_uart_data[] = {
|
|
+ {
|
|
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
|
|
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
|
|
+ .irq = IRQ_IXP4XX_UART2,
|
|
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
|
|
+ .iotype = UPIO_MEM,
|
|
+ .regshift = 2,
|
|
+ .uartclk = IXP4XX_UART_XTAL,
|
|
+ },
|
|
+ { },
|
|
+};
|
|
+
|
|
+static struct platform_device gateway7001_uart = {
|
|
+ .name = "serial8250",
|
|
+ .id = PLAT8250_DEV_PLATFORM,
|
|
+ .dev = {
|
|
+ .platform_data = gateway7001_uart_data,
|
|
+ },
|
|
+ .num_resources = 1,
|
|
+ .resource = &gateway7001_uart_resource,
|
|
+};
|
|
+
|
|
+static struct platform_device *gateway7001_devices[] __initdata = {
|
|
+ &gateway7001_flash,
|
|
+ &gateway7001_uart
|
|
+};
|
|
+
|
|
+static void __init gateway7001_init(void)
|
|
+{
|
|
+ ixp4xx_sys_init();
|
|
+
|
|
+ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
|
|
+ gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
|
|
+
|
|
+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
|
|
+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
|
|
+
|
|
+ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
|
|
+}
|
|
+
|
|
+#ifdef CONFIG_MACH_GATEWAY7001
|
|
+MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
|
|
+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
|
|
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
|
|
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
|
|
+ .map_io = ixp4xx_map_io,
|
|
+ .init_irq = ixp4xx_init_irq,
|
|
+ .timer = &ixp4xx_timer,
|
|
+ .boot_params = 0x0100,
|
|
+ .init_machine = gateway7001_init,
|
|
+MACHINE_END
|
|
+#endif
|
|
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
|
|
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-01-10 20:10:37.000000000 +0100
|
|
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 15:39:28.000000000 +0200
|
|
@@ -33,6 +33,14 @@
|
|
Engineering Coyote Gateway Reference Platform. For more
|
|
information on this platform, see <file:Documentation/arm/IXP4xx>.
|
|
|
|
+config MACH_GATEWAY7001
|
|
+ bool "Gateway 7001"
|
|
+ select PCI
|
|
+ help
|
|
+ Say 'Y' here if you want your kernel to support Gateway's
|
|
+ 7001 Access Point. For more information on this platform,
|
|
+ see http://openwrt.org
|
|
+
|
|
config ARCH_IXDP425
|
|
bool "IXDP425"
|
|
help
|
|
diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
|
|
--- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile 2007-01-10 20:10:37.000000000 +0100
|
|
+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile 2007-04-02 15:49:49.000000000 +0200
|
|
@@ -11,6 +11,7 @@
|
|
obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-pci.o
|
|
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
|
|
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
|
|
+obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
|
|
|
|
obj-y += common.o
|
|
|
|
@@ -20,5 +21,6 @@
|
|
obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.o nslu2-power.o
|
|
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o nas100d-power.o
|
|
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o dsmg600-power.o
|
|
+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
|
|
|
|
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
|
diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
|
|
--- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h 2007-01-10 20:10:37.000000000 +0100
|
|
+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2007-04-02 15:42:04.000000000 +0200
|
|
@@ -38,9 +38,9 @@
|
|
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
|
|
{
|
|
/*
|
|
- * Coyote and gtwx5715 only have UART2 connected
|
|
+ * Some boards are using UART2 as console
|
|
*/
|
|
- if (machine_is_adi_coyote() || machine_is_gtwx5715())
|
|
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
|
|
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
|
|
else
|
|
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
|