Go to file
Imre Kaloz 35df52f89f generic/3.18: upgrade to 3.18.10
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45197
2015-03-31 19:21:13 +00:00
config x86: clean up default grub baudrate settings 2015-03-29 04:31:21 +00:00
docs docs: update remaining references to functions.sh 2012-12-20 15:29:33 +00:00
include generic/3.18: upgrade to 3.18.10 2015-03-31 19:21:13 +00:00
package odhcpd: compile fixes 2015-03-31 17:30:56 +00:00
scripts scripts/ipkg: remove file, it is obsolete 2015-03-29 07:35:36 +00:00
target generic/3.18: upgrade to 3.18.10 2015-03-31 19:21:13 +00:00
toolchain uclibc: backport an upstream i386 syscall fix 2015-03-29 10:43:07 +00:00
tools tools: replace ipkg-utils with a reduced ipkg-build variant in scripts/ 2015-03-29 07:35:26 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore add git-src to .gitignore 2014-01-12 12:06:39 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: clean up sitefiles, make them per-arch 2015-03-28 13:38:34 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
rules.mk rules.mk: add newline definition 2015-03-15 19:47:46 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org