Piotr Dymacz f478fba663 ar71xx: add support for Zbtlink ZBT-WE1526 ... Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 650/400/200 MHz (CPU/DDR/AHB) - 5x 10/100 Mbps Ethernet - 1x USB 2.0 - 128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, up to 22 dBm - two external, non-detachable antennas - 8x LED, 1x button - UART header (pinout: VCC, RX, TX, GND) Flash instruction: Use sysupgrade in vendor firmare which is based on OpenWrt. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-08-18 09:49:18 +02:00
..
lzma-loader	ar71xx/lzma-loader: fix O32 ABI conformance	2016-01-17 15:29:03 +00:00
Makefile	ar71xx: fix a legacy image porting issue	2016-07-13 13:59:24 +02:00
generic.mk	image: add a helper variable for getting kernel/rootfs from within image Build/* templates	2016-07-31 12:25:25 +02:00
legacy-devices.mk	ar71xx: add support for Zbtlink ZBT-WE1526	2016-08-18 09:49:18 +02:00
legacy.mk	ar71xx: add support for Zbtlink ZBT-WE1526	2016-08-18 09:49:18 +02:00
nand.mk	build: rename sysupgrade-nand to sysupgrade-tar	2016-07-29 16:53:03 +02:00
tp-link.mk	ar71xx: fix profile name of Mercury MW4530R	2016-08-15 15:18:35 +02:00
ubinize-nbg6716.ini	ar71xx: nbg6716: Enable procd nand sysupgrage	2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini	ar71xx: remove old jffs2 marker from image generation on nand targets	2014-06-24 18:14:18 +00:00
ubnt.mk	image: add a helper variable for getting kernel/rootfs from within image Build/* templates	2016-07-31 12:25:25 +02:00