openwrt-owl

Go to file

Felix Fietkau 35317253e6 trigger a kernel module rebuild when the kernel config changes SVN-Revision: 6671		2007-03-24 17:05:26 +00:00
docs	Add a paragraph on how to package kernel modules	2007-03-24 10:18:36 +00:00
include	trigger a kernel module rebuild when the kernel config changes	2007-03-24 17:05:26 +00:00
package	trigger a kernel module rebuild when the kernel config changes	2007-03-24 17:05:26 +00:00
scripts	some cleanups in the metadata.pl script; allow target profiles to add overrides for menuconfig	2007-03-23 14:48:47 +00:00
target	Added facility to program entire device from SD-Card Fixed up MAC address init in u-boot	2007-03-24 12:54:38 +00:00
toolchain	fix gcc version selection	2007-03-11 19:26:39 +00:00
tools	Fix potential unligned access with MyLoader based devices, thanks Juhos	2007-03-24 10:22:53 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	allow the user to change the rb532 rootfs size in menuconfig (fixes #1374 )	2007-02-28 00:06:37 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	fix metadata scan for profile split	2007-03-04 21:07:29 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
rules.mk	Added rule for objdump Added support for AT91 SD-Card in primary bootloader (romboot)	2007-03-22 18:07:01 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org