openwrt-owl

Go to file

Felix Fietkau 3294d07ee5 ath9k: fix some more "DMA failed to stop in 10 ms" issues on AR913x (#9654 ) SVN-Revision: 27482		2011-07-06 09:06:56 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
package	ath9k: fix some more "DMA failed to stop in 10 ms" issues on AR913x (#9654 )	2011-07-06 09:06:56 +00:00
scripts	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
target	ramips: add diag support for RT-N15 and PWH2004	2011-07-06 08:05:00 +00:00
toolchain	eglibc: remove old versions	2011-07-02 09:47:00 +00:00
tools	tools/firmware-utils: add yet another buffalo tool	2011-07-06 08:04:53 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	…
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
LICENSE	…
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org