openwrt-owl/package
Felix Fietkau 2e46841afd switch the br2684 default to routed mode instead of bridged mode, as it's more common
SVN-Revision: 12277
2008-08-11 13:02:44 +00:00
..
acx acx: fix firmware download URL 2008-07-14 10:23:36 +00:00
acx-mac80211 acx: fix firmware download URL 2008-07-14 10:23:36 +00:00
admswconfig fix a bug causing the init script to fail and incorrect number of lan ports 2008-03-20 20:11:21 +00:00
aodv-uu Mark broken packages as broken: - acx-mac80211 - openswan - aodv-uu 2008-04-14 11:18:29 +00:00
ar7-atm ar7-atm: patch was against an older tarball, fixear7-atm: patch was against an older tarball, fixedd 2008-03-11 17:39:54 +00:00
arptables arptables: Update to 0.0.3-3 2008-06-22 18:40:30 +00:00
ath9k update ath9k to latest git version 2008-08-03 14:28:21 +00:00
b43 revert r11749: b43 should not depend on crypto modules, mac80211 should 2008-07-09 19:05:47 +00:00
base-files add basic interface alias support. for now (since we don't use ip in our network scripts yet), it adds :1, :2, ... alias interfaces this will change when we add support for the ip utility, but the config format will remain the same. example: 2008-08-07 15:28:48 +00:00
br2684ctl switch the br2684 default to routed mode instead of bridged mode, as it's more common 2008-08-11 13:02:44 +00:00
bridge-utils remove duplicate include statement 2007-09-28 01:23:17 +00:00
broadcom-57xx remove some unused crap 2008-06-15 11:15:35 +00:00
broadcom-diag broadcom-diag: reset the interrupt mask of configured leds to avoid spurious interrupts 2008-07-31 01:33:14 +00:00
broadcom-mmc DESCRIPTION:= is obselete 2007-10-14 04:46:38 +00:00
broadcom-wl Make sure we will have lower case MAC addresses when doing WDS 2008-08-09 10:00:49 +00:00
busybox Do not run telnet if either dropbear or openssh server are running (#3839) 2008-08-09 09:50:12 +00:00
button-hotplug button-hotplug: fix compile warnings 2008-07-26 16:32:12 +00:00
comgt This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com> 2008-07-21 20:36:16 +00:00
dnsmasq fixes dbus param of dnsmasq, #3818, thanks the.loeki 2008-07-28 07:59:40 +00:00
dropbear dropbear: upgrade to 0.51 - 160-tty_close merged upstream - patches refreshed 2008-07-24 05:24:52 +00:00
e2fsprogs e2fsprogs: Update to 1.40.11 2008-06-22 18:40:53 +00:00
ebtables ebtables: useless without kmod-eptables 2008-08-06 15:28:49 +00:00
fconfig move the fconfig package into trunk 2008-05-27 13:21:12 +00:00
firewall adds a new uci firewall - iptbales and netfilter packages need to be rewrapped when we switch to this firewall as default - there are some examples in the file /etc/config/firewall - iptables-save/restore are still missing - hotplug takes care of adding/removing netdevs during runtime - misisng features ? wishes ? let me know ... 2008-08-04 11:51:58 +00:00
fuse fix fuse: use in-kernel module for 2.6.25+ kernels 2008-05-11 22:27:32 +00:00
gdbserver Use $(CP) instead of $(INSTALL_BIN) for binaries. 2007-12-09 18:53:06 +00:00
gmp use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
gpioctl more use of the new GPIO_SUPPORT option 2008-05-02 00:30:39 +00:00
grub make grub compilable under fedora core 8 and other newer distros 2008-08-02 15:15:33 +00:00
hostap-driver push a couple of fixes upstream from Acinonyx 2008-02-15 00:33:31 +00:00
hostap-utils replace common -I and -L search flags with TARGET_CPPFLAGS and TARGET_LDFLAGS 2007-03-28 00:35:26 +00:00
hostapd Fix hostapd compilation which was broken only for 2.6.25 (#3733). Thanks to Hauke Mehrtens. 2008-07-10 14:23:06 +00:00
hotplug2 remove warning from hotplug2, which pops up 10 times during boot 2008-08-04 08:04:16 +00:00
i2c-gpio-custom remove the i2c-gpio-custom driver from adm5120, and make it available on all platforms 2008-04-29 17:18:21 +00:00
ifenslave move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
ipkg use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
iproute2 package iproute2 has problems building on recent BSD-derived platforms because some programs to be run on the host use malloc.h in an incompatible way. 2008-08-08 21:49:17 +00:00
ipsec-tools replace cflags hacks with the correct solution 2007-12-29 20:31:48 +00:00
ipset mark ipset as 2.6 only 2007-10-20 20:03:52 +00:00
iptables use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
isakmpd remove a hack that is no longer necessary 2007-07-12 13:43:59 +00:00
iw enable iw for all 2.6 versions 2008-07-31 02:43:42 +00:00
ixp4xx-microcode switch to a different NPE-C firmware 2008-07-12 16:28:50 +00:00
kernel fix kmod-ide-core packaging for 2.6.26+ 2008-08-10 14:37:23 +00:00
kexec-tools kexec for powerpc actually only support ps3 or gamecube, not magicbox for instance 2008-08-06 20:20:02 +00:00
keynote replace cflags hacks with the correct solution 2007-12-29 20:31:48 +00:00
libertas Updating libertas wireless driver to latest version. 2008-01-24 03:03:04 +00:00
libnl use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
libpcap use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
libtool patch Makefile.am for GLOBAL_LIBDIR as well 2007-12-28 16:48:15 +00:00
linux-atm remove uninstalldev templates (no longer necessary) 2007-12-25 01:40:47 +00:00
lua use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
mac80211 mark mac80211 as broken on avr32 2008-08-05 18:02:34 +00:00
madwifi Add 11gdt, 11adt, 11ast and fh modes (#3824) 2008-08-07 15:28:07 +00:00
mmc_over_gpio Update gpiommc to use configfs 2008-07-20 19:34:09 +00:00
mtd add support for appending a file to jffs2 during reflash on the fly 2008-08-08 22:43:19 +00:00
ncurses use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
nozomi move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
nvram use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
openssl use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
openswan mark all openswan packages as broken 2008-04-14 12:31:27 +00:00
opkg use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
p54 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
pcmcia-cs Use $(CP) instead of $(INSTALL_BIN) for binaries. 2007-12-09 18:53:06 +00:00
ppp fixes ppp ipv6 scripts, signed-off-by: Alina Friedrichsen 2008-07-29 23:40:19 +00:00
pptp ppp/pptp fixes: - prevent ppp from logging to /etc/ppp/connect-errors (closes: #2989) - add dependency on ppp and kmod-gre to pptp - bump release number 2008-05-03 12:11:35 +00:00
ps3-utils add ps3-dump-bootloader to package install 2008-05-05 21:49:24 +00:00
qc-usb fix qc-usb compile on atheros 2008-08-05 23:20:42 +00:00
qos-scripts Load xt_layer7 for 2.6 kernels (#3269) 2008-03-27 14:47:54 +00:00
robocfg move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
rt61 Mark rt61 as 2.6.23 only (#3337) 2008-04-17 17:11:34 +00:00
rt2500 remove hacks to disable modules on some targets now that we do have proper PCI & USB support detected on all targets at config-time, mark p54 as broken (for too long) 2008-05-26 22:57:51 +00:00
rt2570 move package description to a separate definition, remove it when DESCRIPTION=TITLE 2007-09-07 08:34:51 +00:00
shfs fix mount.shfs symlink issue 2007-12-13 21:04:18 +00:00
spi-ks8995 fixes ipkg dependency bug for spi modules, #3272 2008-07-30 00:27:21 +00:00
strongswan bump package versions after updates 2007-09-07 20:41:57 +00:00
switch (4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered 2008-06-15 11:10:27 +00:00
uboot-ifxmips move ifxmips uboot to package/ 2008-06-28 19:53:41 +00:00
ubsec_ssb ubsec ssb is only available on brcm47xx 2008-07-16 10:15:12 +00:00
uci use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
udev add missing udevextras package option - edd_id 2008-05-05 21:58:03 +00:00
util-linux-ng fixed mount path (closes #3464) 2008-05-25 20:03:00 +00:00
w1-gpio-custom import w1-gpio-custom driver from the Squidge (http://squidge.sourceforge.net/) project 2008-04-29 18:31:43 +00:00
wireless-tools package shared library as well (partially closes: #3030) 2008-04-14 02:06:35 +00:00
wpa_supplicant add missing dependency 2008-08-10 15:49:52 +00:00
wrt55agv2-spidevs use the spi-ks8995 driver on the WRT55AG v2 boards 2008-04-17 13:12:57 +00:00
yamonenv major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 2007-09-08 19:55:42 +00:00
zlib use $(FPIC) in a few places where it matters 2008-08-06 22:10:29 +00:00
Makefile Generate gzipped package lists - Can be used by changing the src line in /etc/ipkg.conf to src/gz - Cannot be used by busybox ipkg 2008-07-29 03:36:11 +00:00