mirror of https://github.com/hak5/openwrt-owl.git
279 lines
8.6 KiB
Diff
279 lines
8.6 KiB
Diff
--- a/drivers/pci/host/pcie-qcom.c
|
|
+++ b/drivers/pci/host/pcie-qcom.c
|
|
@@ -29,8 +29,53 @@
|
|
|
|
#include "pcie-designware.h"
|
|
|
|
+/* DBI registers */
|
|
+#define PCIE20_CAP 0x70
|
|
+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
|
|
+
|
|
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
|
|
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
|
|
+
|
|
+#define PCIE20_PLR_IATU_VIEWPORT 0x900
|
|
+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
|
|
+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
|
|
+
|
|
+#define PCIE20_PLR_IATU_CTRL1 0x904
|
|
+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
|
|
+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
|
|
+
|
|
+#define PCIE20_PLR_IATU_CTRL2 0x908
|
|
+#define PCIE20_PLR_IATU_ENABLE BIT(31)
|
|
+
|
|
+#define PCIE20_PLR_IATU_LBAR 0x90C
|
|
+#define PCIE20_PLR_IATU_UBAR 0x910
|
|
+#define PCIE20_PLR_IATU_LAR 0x914
|
|
+#define PCIE20_PLR_IATU_LTAR 0x918
|
|
+#define PCIE20_PLR_IATU_UTAR 0x91c
|
|
+
|
|
+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
|
|
+
|
|
+/* PARF registers */
|
|
+#define PCIE20_PARF_PCS_DEEMPH 0x34
|
|
+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
|
|
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
|
|
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
|
|
+
|
|
+#define PCIE20_PARF_PCS_SWING 0x38
|
|
+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
|
|
+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
|
|
+
|
|
#define PCIE20_PARF_PHY_CTRL 0x40
|
|
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
|
|
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
|
|
+
|
|
#define PCIE20_PARF_PHY_REFCLK 0x4C
|
|
+#define REF_SSP_EN BIT(16)
|
|
+#define REF_USE_PAD BIT(12)
|
|
+
|
|
+#define PCIE20_PARF_CONFIG_BITS 0x50
|
|
+#define PHY_RX0_EQ(x) (x << 24)
|
|
+
|
|
#define PCIE20_PARF_DBI_BASE_ADDR 0x168
|
|
#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
|
|
#define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
|
|
@@ -39,9 +84,6 @@
|
|
#define PCIE20_ELBI_SYS_STTS 0x08
|
|
#define XMLH_LINK_UP BIT(10)
|
|
|
|
-#define PCIE20_CAP 0x70
|
|
-#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
|
|
-
|
|
#define PERST_DELAY_MIN_US 1000
|
|
#define PERST_DELAY_MAX_US 1005
|
|
|
|
@@ -56,14 +98,18 @@ struct qcom_pcie_resources_v0 {
|
|
struct clk *iface_clk;
|
|
struct clk *core_clk;
|
|
struct clk *phy_clk;
|
|
+ struct clk *aux_clk;
|
|
+ struct clk *ref_clk;
|
|
struct reset_control *pci_reset;
|
|
struct reset_control *axi_reset;
|
|
struct reset_control *ahb_reset;
|
|
struct reset_control *por_reset;
|
|
struct reset_control *phy_reset;
|
|
+ struct reset_control *ext_reset;
|
|
struct regulator *vdda;
|
|
struct regulator *vdda_phy;
|
|
struct regulator *vdda_refclk;
|
|
+ uint8_t phy_tx0_term_offset;
|
|
};
|
|
|
|
struct qcom_pcie_resources_v1 {
|
|
@@ -156,10 +202,13 @@ static void qcom_pcie_disable_resources_
|
|
reset_control_assert(res->axi_reset);
|
|
reset_control_assert(res->ahb_reset);
|
|
reset_control_assert(res->por_reset);
|
|
- reset_control_assert(res->pci_reset);
|
|
+ reset_control_assert(res->phy_reset);
|
|
+ reset_control_assert(res->ext_reset);
|
|
clk_disable_unprepare(res->iface_clk);
|
|
clk_disable_unprepare(res->core_clk);
|
|
clk_disable_unprepare(res->phy_clk);
|
|
+ clk_disable_unprepare(res->aux_clk);
|
|
+ clk_disable_unprepare(res->ref_clk);
|
|
regulator_disable(res->vdda);
|
|
regulator_disable(res->vdda_phy);
|
|
regulator_disable(res->vdda_refclk);
|
|
@@ -201,6 +250,12 @@ static int qcom_pcie_enable_resources_v0
|
|
goto err_vdda_phy;
|
|
}
|
|
|
|
+ ret = reset_control_deassert(res->ext_reset);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "cannot assert ext reset\n");
|
|
+ goto err_reset_ext;
|
|
+ }
|
|
+
|
|
ret = clk_prepare_enable(res->iface_clk);
|
|
if (ret) {
|
|
dev_err(dev, "cannot prepare/enable iface clock\n");
|
|
@@ -219,6 +274,18 @@ static int qcom_pcie_enable_resources_v0
|
|
goto err_clk_phy;
|
|
}
|
|
|
|
+ ret = clk_prepare_enable(res->aux_clk);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "cannot prepare/enable aux clock\n");
|
|
+ goto err_clk_aux;
|
|
+ }
|
|
+
|
|
+ ret = clk_prepare_enable(res->ref_clk);
|
|
+ if (ret) {
|
|
+ dev_err(dev, "cannot prepare/enable ref clock\n");
|
|
+ goto err_clk_ref;
|
|
+ }
|
|
+
|
|
ret = reset_control_deassert(res->ahb_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert ahb reset\n");
|
|
@@ -228,12 +295,18 @@ static int qcom_pcie_enable_resources_v0
|
|
return 0;
|
|
|
|
err_reset_ahb:
|
|
+ clk_disable_unprepare(res->ref_clk);
|
|
+err_clk_ref:
|
|
+ clk_disable_unprepare(res->aux_clk);
|
|
+err_clk_aux:
|
|
clk_disable_unprepare(res->phy_clk);
|
|
err_clk_phy:
|
|
clk_disable_unprepare(res->core_clk);
|
|
err_clk_core:
|
|
clk_disable_unprepare(res->iface_clk);
|
|
err_iface:
|
|
+ reset_control_assert(res->ext_reset);
|
|
+err_reset_ext:
|
|
regulator_disable(res->vdda_phy);
|
|
err_vdda_phy:
|
|
regulator_disable(res->vdda_refclk);
|
|
@@ -329,6 +402,14 @@ static int qcom_pcie_get_resources_v0(st
|
|
if (IS_ERR(res->phy_clk))
|
|
return PTR_ERR(res->phy_clk);
|
|
|
|
+ res->aux_clk = devm_clk_get(dev, "aux");
|
|
+ if (IS_ERR(res->aux_clk))
|
|
+ return PTR_ERR(res->aux_clk);
|
|
+
|
|
+ res->ref_clk = devm_clk_get(dev, "ref");
|
|
+ if (IS_ERR(res->ref_clk))
|
|
+ return PTR_ERR(res->ref_clk);
|
|
+
|
|
res->pci_reset = devm_reset_control_get(dev, "pci");
|
|
if (IS_ERR(res->pci_reset))
|
|
return PTR_ERR(res->pci_reset);
|
|
@@ -349,6 +430,14 @@ static int qcom_pcie_get_resources_v0(st
|
|
if (IS_ERR(res->phy_reset))
|
|
return PTR_ERR(res->phy_reset);
|
|
|
|
+ res->ext_reset = devm_reset_control_get(dev, "ext");
|
|
+ if (IS_ERR(res->ext_reset))
|
|
+ return PTR_ERR(res->ext_reset);
|
|
+
|
|
+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
|
|
+ &res->phy_tx0_term_offset))
|
|
+ res->phy_tx0_term_offset = 0;
|
|
+
|
|
return 0;
|
|
}
|
|
|
|
@@ -461,6 +550,57 @@ err_res:
|
|
qcom_pcie_disable_resources_v1(pcie);
|
|
}
|
|
|
|
+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
|
|
+{
|
|
+ struct pcie_port *pp = &pcie->pp;
|
|
+
|
|
+ /*
|
|
+ * program and enable address translation region 0 (device config
|
|
+ * address space); region type config;
|
|
+ * axi config address range to device config address range
|
|
+ */
|
|
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
|
|
+ PCIE20_PLR_IATU_REGION_INDEX(0),
|
|
+ pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
|
|
+
|
|
+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
|
|
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
|
|
+ writel(pp->cfg0_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
|
|
+ writel((pp->cfg0_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
|
|
+ writel((pp->cfg0_mod_base + pp->cfg0_size - 1),
|
|
+ pcie->dbi + PCIE20_PLR_IATU_LAR);
|
|
+ writel(busdev, pcie->dbi + PCIE20_PLR_IATU_LTAR);
|
|
+ writel(0, pcie->dbi + PCIE20_PLR_IATU_UTAR);
|
|
+}
|
|
+
|
|
+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
|
|
+{
|
|
+ struct pcie_port *pp = &pcie->pp;
|
|
+
|
|
+ /*
|
|
+ * program and enable address translation region 2 (device resource
|
|
+ * address space); region type memory;
|
|
+ * axi device bar address range to device bar address range
|
|
+ */
|
|
+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
|
|
+ PCIE20_PLR_IATU_REGION_INDEX(2),
|
|
+ pcie->dbi + PCIE20_PLR_IATU_VIEWPORT);
|
|
+
|
|
+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->dbi + PCIE20_PLR_IATU_CTRL1);
|
|
+ writel(PCIE20_PLR_IATU_ENABLE, pcie->dbi + PCIE20_PLR_IATU_CTRL2);
|
|
+ writel(pp->mem_mod_base, pcie->dbi + PCIE20_PLR_IATU_LBAR);
|
|
+ writel((pp->mem_mod_base >> 32), pcie->dbi + PCIE20_PLR_IATU_UBAR);
|
|
+ writel(pp->mem_mod_base + pp->mem_size - 1,
|
|
+ pcie->dbi + PCIE20_PLR_IATU_LAR);
|
|
+ writel(pp->mem_bus_addr, pcie->dbi + PCIE20_PLR_IATU_LTAR);
|
|
+ writel(upper_32_bits(pp->mem_bus_addr),
|
|
+ pcie->dbi + PCIE20_PLR_IATU_UTAR);
|
|
+
|
|
+ /* 1K PCIE buffer setting */
|
|
+ writel(0x3, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
|
|
+ writel(0x1, pcie->dbi + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
|
|
+}
|
|
+
|
|
static void qcom_pcie_host_init_v0(struct pcie_port *pp)
|
|
{
|
|
struct qcom_pcie *pcie = to_qcom_pcie(pp);
|
|
@@ -476,9 +616,26 @@ static void qcom_pcie_host_init_v0(struc
|
|
|
|
writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
|
|
|
|
- /* enable external reference clock */
|
|
- writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, 0, BIT(16));
|
|
+ /* Set Tx termination offset */
|
|
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
|
|
+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
|
|
+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
|
|
+
|
|
+ /* PARF programming */
|
|
+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
|
|
+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
|
|
+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
|
|
+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
|
|
+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
|
|
+ PCS_SWING_TX_SWING_LOW(0x78),
|
|
+ pcie->parf + PCIE20_PARF_PCS_SWING);
|
|
+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
|
|
+
|
|
+ /* Enable reference clock */
|
|
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
|
|
+ REF_USE_PAD, REF_SSP_EN);
|
|
|
|
+ /* De-assert PHY, PCIe, POR and AXI resets */
|
|
ret = reset_control_deassert(res->phy_reset);
|
|
if (ret) {
|
|
dev_err(dev, "cannot deassert phy reset\n");
|
|
@@ -517,6 +674,9 @@ static void qcom_pcie_host_init_v0(struc
|
|
if (ret)
|
|
goto err;
|
|
|
|
+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
|
|
+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
|
|
+
|
|
return;
|
|
err:
|
|
qcom_ep_reset_assert(pcie);
|