openwrt-owl

Go to file

Felix Fietkau 2bcc7fb12b qos-scripts: disable overhead calculation by default, it does not work properly for many line speeds SVN-Revision: 25685		2011-02-24 00:30:09 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	kernel: remove imq support, refresh patches	2011-02-21 02:06:51 +00:00
package	qos-scripts: disable overhead calculation by default, it does not work properly for many line speeds	2011-02-24 00:30:09 +00:00
scripts	Never write errors to stdout from ipkg-make-index.sh	2011-02-23 22:58:58 +00:00
target	kernel config: disable the pcomp api + zlib decompressor by default - it has not been used for a while now	2011-02-24 00:30:02 +00:00
toolchain	remove the CS variant - broken since it's addition	2011-02-21 11:43:16 +00:00
tools	tools/e2fsprogs: move uuid/uuid.h into a subdirectory, it conflicts with a system header file with the same name on darwin	2011-02-20 03:25:56 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	prepare support for libiconv, libintl stub/full switching	2011-02-02 01:26:19 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	add a variable LIBRPC to refer to the external librpc if used	2011-02-13 01:45:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org