openwrt-owl

Go to file

Alexandros C. Couloumbis 2a785745e9 target/linux: add some 2.6.37 missing symbols. (thank you maddes) SVN-Revision: 24002		2010-11-15 09:04:23 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	package-ipkg.mk: add support for "essential" package flag, fix typo	2010-11-11 16:18:01 +00:00
package	6to4: use revert instead of delete, avoids aggregating deltas in /tmp/.uci over time	2010-11-15 01:17:32 +00:00
scripts	deptest: Capitalize failure message. Makes it easier to spot in the logs.	2010-11-04 11:30:10 +00:00
target	target/linux: add some 2.6.37 missing symbols. (thank you maddes)	2010-11-15 09:04:23 +00:00
toolchain	update the linaro gcc to v2010.11-1	2010-11-10 12:27:33 +00:00
tools	brcm63xx: imagetag: Fixed occaisonal wrong CRC in image due to using strncpy to copy the CRC into the imagetag. strncpy stops copying after a 00 byte, memcpy doesn't.	2010-11-15 04:08:09 +00:00
.gitignore	.gitignore: Undo accidental commit.	2010-05-10 17:59:05 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	make the display support feature flag selectable	2010-11-02 16:26:57 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	Add lxde feed to feeds.conf.default	2010-08-12 19:03:44 +00:00
rules.mk	remove an obsolete comment for the flock template	2010-10-31 15:36:47 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org