mirror of https://github.com/hak5/openwrt-owl.git
34 lines
1.1 KiB
Diff
34 lines
1.1 KiB
Diff
Index: linux-2.6.21.7/arch/arm/mach-pxa/gumstix.c
|
|
===================================================================
|
|
--- linux-2.6.21.7.orig/arch/arm/mach-pxa/gumstix.c
|
|
+++ linux-2.6.21.7/arch/arm/mach-pxa/gumstix.c
|
|
@@ -33,8 +33,9 @@
|
|
|
|
static struct pxamci_platform_data gumstix_mci_platform_data;
|
|
|
|
-static int gumstix_mci_init(struct device *dev, irqreturn_t (*gumstix_detect_int)(int, void *, struct pt_regs *), void *data)
|
|
+static int gumstix_mci_init(struct device *dev, irq_handler_t gumstix_detect_int, void *data)
|
|
{
|
|
+#ifndef CONFIG_ARCH_GUMSTIX_VERDEX
|
|
int err;
|
|
|
|
pxa_gpio_mode(GPIO6_MMCCLK_MD);
|
|
@@ -55,6 +56,17 @@ static int gumstix_mci_init(struct devic
|
|
}
|
|
|
|
err = set_irq_type(GUMSTIX_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
|
|
+#else
|
|
+ // Setup GPIOs for MMC on the 120-pin connector
|
|
+ // There is no card detect on a uSD connector so no interrupt to register
|
|
+ // There is no WP detect GPIO line either
|
|
+ pxa_gpio_mode(GPIO92_MMCDAT0_MD);
|
|
+ pxa_gpio_mode(GPIO112_MMCCMD_MD);
|
|
+ pxa_gpio_mode(GPIO110_MMCDAT2_MD);
|
|
+ pxa_gpio_mode(GPIO111_MMCDAT3_MD);
|
|
+ pxa_gpio_mode(GPIO109_MMCDAT1_MD);
|
|
+ pxa_gpio_mode(GPIO32_MMCCLK_MD);
|
|
+#endif
|
|
|
|
return 0;
|
|
}
|