hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
31,662 Commits
4 Branches
8 Tags
167 MiB
C 66.6%
Makefile 16.7%
Shell 8%
Roff 2.7%
Perl 2.1%
Other 3.8%
 
 
 
 
 
 
Go to file
Felix Fietkau 28d8972c25 ar71xx: fix 100/10mbps ethernet link issues on mynet range extender 
The mynet range extender hardware is suffering from ethernet
link loss when booting with a recent openwrt image. This only
happens on 100mbps links, with 1Gbps speed the link was fine.

The cause of the problem is that the AR8035 PHY (aka F1E)
requires turning on and off the special TX delay setting
depending on the speed of the link.

The 10mbps mode only needed the proper pll value, which was
extracted from the vendor code.

Reported-by: Pascal Paradis
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 45954
 		2015-06-14 17:41:01 +00:00
config build: enable package list signing by default 2015-05-05 21:16:13 +00:00
docs docs: Fix typo buysbox -> busybox. 2015-04-09 10:32:26 +00:00
include include: image.mk: ensure that $(KDIR)/tmp exists in the IB case as well 2015-06-01 18:00:35 +00:00
package samba36: remove host build paths 2015-06-14 17:40:52 +00:00
scripts scripts: add srecimage.pl, a script to convert binaries to SREC format 2015-05-28 15:53:55 +00:00
target ar71xx: fix 100/10mbps ethernet link issues on mynet range extender 2015-06-14 17:41:01 +00:00
toolchain toolchain/gcc: upgrade Linaro GCC 4.9 to 4.9-2015.03 2015-06-11 11:57:11 +00:00
tools bc: add download mirrors 2015-06-06 13:48:57 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean 2015-05-23 15:28:42 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
rules.mk build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org