openwrt-owl/target/linux/mvebu/patches-3.8/009-mmc_mvsdio_add_pinctrl....

67 lines
2.3 KiB
Diff

From patchwork Wed Jan 16 13:14:00 2013
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [5/5] mmc: mvsdio: add pinctrl integration
Date: Wed, 16 Jan 2013 13:14:00 -0000
From: Andrew Lunn <andrew@lunn.ch>
X-Patchwork-Id: 1987901
Message-Id: <1358342040-7130-6-git-send-email-andrew@lunn.ch>
To: Jason Cooper <jason@lakedaemon.net>
Cc: linux ARM <linux-arm-kernel@lists.infradead.org>,
linux-mmc@vger.kernel.org, linux@arm.linux.org.uk,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Andrew Lunn <andrew@lunn.ch>
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On many Marvell SoCs, the pins used for the SDIO interface are part of
the MPP pins, that are muxable pins. In order to get the muxing of
those pins correct, this commit integrates the mvsdio driver with the
pinctrl infrastructure by calling devm_pinctrl_get_select_default()
during ->probe().
Note that we permit this function to fail because not all Marvell
platforms have yet been fully converted to using the pinctrl
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Peter <s.peter@mpl.ch>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
drivers/mmc/host/mvsdio.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -25,6 +25,7 @@
#include <linux/of_irq.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/sizes.h>
#include <asm/unaligned.h>
@@ -690,6 +691,7 @@ static int __init mvsd_probe(struct plat
struct resource *r;
int ret, irq;
int gpio_card_detect, gpio_write_protect;
+ struct pinctrl *pinctrl;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
@@ -706,6 +708,10 @@ static int __init mvsd_probe(struct plat
host->mmc = mmc;
host->dev = &pdev->dev;
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ dev_warn(&pdev->dev, "no pins associated\n");
+
/* Some non-DT platforms do not pass a clock, and the clock
frequency is passed through platform_data. On DT platforms,
a clock must always be passed, even if there is no gatable