openwrt-owl/target/linux/sunxi/patches-3.14/190-ahci-libahci-changes.patch

873 lines
24 KiB
Diff

From 3b5db9d024f173c30ef4060c31bb8e9fbd194cc1 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 2 Dec 2013 16:13:32 +0100
Subject: [PATCH] libahci: Allow drivers to override start_engine
Allwinner A10 and A20 ARM SoCs have an AHCI sata controller which needs a
special register to be poked before starting the DMA engine.
This register gets reset on an ahci_stop_engine call, so there is no other
place then ahci_start_engine where this poking can be done.
This commit allows drivers to override ahci_start_engine behavior for use by
the Allwinner AHCI driver (and potentially other drivers in the future).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/ata/ahci.c | 6 ++++--
drivers/ata/ahci.h | 6 ++++++
drivers/ata/libahci.c | 26 +++++++++++++++++++-------
drivers/ata/sata_highbank.c | 3 ++-
4 files changed, 31 insertions(+), 10 deletions(-)
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -606,6 +606,7 @@ static int ahci_vt8251_hardreset(struct
unsigned long deadline)
{
struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
bool online;
int rc;
@@ -616,7 +617,7 @@ static int ahci_vt8251_hardreset(struct
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
@@ -631,6 +632,7 @@ static int ahci_p5wdh_hardreset(struct a
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -646,7 +648,7 @@ static int ahci_p5wdh_hardreset(struct a
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
#include <linux/clk.h>
#include <linux/libata.h>
+#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
#define EM_CTRL_MSG_TYPE 0x000f0000
@@ -51,6 +52,7 @@
enum {
AHCI_MAX_PORTS = 32,
+ AHCI_MAX_CLKS = 3,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
@@ -322,8 +324,15 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
- struct clk *clk; /* Only for platforms supporting clk */
+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
+ struct regulator *target_pwr; /* Optional */
void *plat_data; /* Other platform data */
+ /*
+ * Optional ahci_start_engine override, if not set this gets set to the
+ * default ahci_start_engine during ahci_save_initial_config, this can
+ * be overridden anytime before the host is activated.
+ */
+ void (*start_engine)(struct ata_port *ap);
};
extern int ahci_ignore_sss;
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(st
*
* If inconsistent, config values are fixed up by this function.
*
+ * If it is not set already this function sets hpriv->start_engine to
+ * ahci_start_engine.
+ *
* LOCKING:
* None.
*/
@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct dev
hpriv->cap = cap;
hpriv->cap2 = cap2;
hpriv->port_map = port_map;
+
+ if (!hpriv->start_engine)
+ hpriv->start_engine = ahci_start_engine;
}
EXPORT_SYMBOL_GPL(ahci_save_initial_config);
@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_p
/* enable DMA */
if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap
/* restart engine */
out_restart:
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_kick_engine);
@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_lin
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_lin
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *a
void ahci_error_handler(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
sata_pmp_error_handler(ap);
@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struc
static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_device *dev = ap->link.device;
u32 devslp, dm, dito, mdat, deto;
@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(s
PORT_DEVSLP_ADSE);
writel(devslp, port_mmio + PORT_DEVSLP);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
/* enable device sleep feature for the drive */
err_mask = ata_dev_set_feature(dev,
@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(s
static void ahci_enable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_p
} else
dev_err(ap->host->dev, "Failed to enable FBS\n");
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_disable_fbs(struct ata_port *ap)
{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_
pp->fbs_enabled = false;
}
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
}
static void ahci_pmp_attach(struct ata_port *ap)
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struc
static const unsigned long timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struc
break;
} while (!online && retry--);
- ahci_start_engine(ap);
+ hpriv->start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -10,6 +10,8 @@ Required properties:
Optional properties:
- dma-coherent : Present if dma operations are coherent
+- clocks : a list of phandle + clock specifier pairs
+- target-supply : regulator for SATA target power
Example:
sata@ffe08000 {
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -87,78 +87,252 @@ static struct scsi_host_template ahci_pl
AHCI_SHT("ahci_platform"),
};
-static int ahci_probe(struct platform_device *pdev)
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the clks found in hpriv->clks, starting
+ * at index 0. If any clk fails to enable it disables all the clks
+ * already enabled in reverse order, and then returns an error.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
{
- struct device *dev = &pdev->dev;
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
- const struct platform_device_id *id = platform_get_device_id(pdev);
- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct ahci_host_priv *hpriv;
- struct ata_host *host;
- struct resource *mem;
- int irq;
- int n_ports;
- int i;
- int rc;
+ int c, rc;
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(dev, "no mmio space\n");
- return -EINVAL;
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+ rc = clk_prepare_enable(hpriv->clks[c]);
+ if (rc)
+ goto disable_unprepare_clk;
}
+ return 0;
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
- }
+disable_unprepare_clk:
+ while (--c >= 0)
+ clk_disable_unprepare(hpriv->clks[c]);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
- if (pdata && pdata->ata_port_info)
- pi = *pdata->ata_port_info;
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all the clks found in hpriv->clks, in reverse
+ * order of ahci_platform_enable_clks (starting at the end of the array).
+ *
+ * LOCKING:
+ * None.
+ */
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
- if (!hpriv) {
- dev_err(dev, "can't alloc ahci_host_priv\n");
- return -ENOMEM;
+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+ if (hpriv->clks[c])
+ clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all ahci_platform managed resources in
+ * the following order:
+ * 1) Regulator
+ * 2) Clocks (through ahci_platform_enable_clks)
+ *
+ * If resource enabling fails at any point the previous enabled
+ * resources are disabled in reverse order.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+{
+ int rc;
+
+ if (hpriv->target_pwr) {
+ rc = regulator_enable(hpriv->target_pwr);
+ if (rc)
+ return rc;
}
- hpriv->flags |= (unsigned long)pi.private_data;
+ rc = ahci_platform_enable_clks(hpriv);
+ if (rc)
+ goto disable_regulator;
+
+ return 0;
+
+disable_regulator:
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+
+/**
+ * ahci_platform_disable_resources - Disable platform resources
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all ahci_platform managed resources in
+ * the following order:
+ * 1) Clocks (through ahci_platform_disable_clks)
+ * 2) Regulator
+ *
+ * LOCKING:
+ * None.
+ */
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+{
+ ahci_platform_disable_clks(hpriv);
- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ if (hpriv->target_pwr)
+ regulator_disable(hpriv->target_pwr);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
+
+static void ahci_platform_put_resources(struct device *dev, void *res)
+{
+ struct ahci_host_priv *hpriv = res;
+ int c;
+
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+ clk_put(hpriv->clks[c]);
+}
+
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ *
+ * This function allocates an ahci_host_priv struct, and gets the
+ * following resources, storing a reference to them inside the returned
+ * struct:
+ *
+ * 1) mmio registers (IORESOURCE_MEM 0, mandatory)
+ * 2) regulator for controlling the targets power (optional)
+ * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
+ * or for non devicetree enabled platforms a single clock
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
+ */
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct clk *clk;
+ int i, rc = -ENOMEM;
+
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
+
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
+
+ devres_add(dev, hpriv);
+
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (!hpriv->mmio) {
- dev_err(dev, "can't map %pR\n", mem);
- return -ENOMEM;
+ dev_err(dev, "no mmio space\n");
+ goto err_out;
}
- hpriv->clk = clk_get(dev, NULL);
- if (IS_ERR(hpriv->clk)) {
- dev_err(dev, "can't get clock\n");
- } else {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- goto free_clk;
+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
+ if (IS_ERR(hpriv->target_pwr)) {
+ rc = PTR_ERR(hpriv->target_pwr);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ hpriv->target_pwr = NULL;
+ }
+
+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
+ /*
+ * For now we must use clk_get(dev, NULL) for the first clock,
+ * because some platforms (da850, spear13xx) are not yet
+ * converted to use devicetree for clocks. For new platforms
+ * this is equivalent to of_clk_get(dev->of_node, 0).
+ */
+ if (i == 0)
+ clk = clk_get(dev, NULL);
+ else
+ clk = of_clk_get(dev->of_node, i);
+
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto err_out;
+ break;
}
+ hpriv->clks[i] = clk;
}
- /*
- * Some platforms might need to prepare for mmio region access,
- * which could be done in the following init call. So, the mmio
- * region shouldn't be accessed before init (if provided) has
- * returned successfully.
- */
- if (pdata && pdata->init) {
- rc = pdata->init(dev, hpriv->mmio);
- if (rc)
- goto disable_unprepare_clk;
- }
+ devres_remove_group(dev, NULL);
+ return hpriv;
+
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_get_resources);
+
+/**
+ * ahci_platform_init_host - Bring up an ahci-platform host
+ * @pdev: platform device pointer for the host
+ * @hpriv: ahci-host private data for the host
+ * @pi_template: template for the ata_port_info to use
+ * @force_port_map: param passed to ahci_save_initial_config
+ * @mask_port_map: param passed to ahci_save_initial_config
+ *
+ * This function does all the usual steps needed to bring up an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map)
+{
+ struct device *dev = &pdev->dev;
+ struct ata_port_info pi = *pi_template;
+ const struct ata_port_info *ppi[] = { &pi, NULL };
+ struct ata_host *host;
+ int i, irq, n_ports, rc;
- ahci_save_initial_config(dev, hpriv,
- pdata ? pdata->force_port_map : 0,
- pdata ? pdata->mask_port_map : 0);
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(dev, "no irq\n");
+ return -EINVAL;
+ }
/* prepare host */
+ hpriv->flags |= (unsigned long)pi.private_data;
+
+ ahci_save_initial_config(dev, hpriv, force_port_map, mask_port_map);
+
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
@@ -175,10 +349,8 @@ static int ahci_probe(struct platform_de
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
- if (!host) {
- rc = -ENOMEM;
- goto pdata_exit;
- }
+ if (!host)
+ return -ENOMEM;
host->private_data = hpriv;
@@ -193,7 +365,8 @@ static int ahci_probe(struct platform_de
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- ata_port_desc(ap, "mmio %pR", mem);
+ ata_port_desc(ap, "mmio %pR",
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
@@ -207,13 +380,53 @@ static int ahci_probe(struct platform_de
rc = ahci_reset_controller(host);
if (rc)
- goto pdata_exit;
+ return rc;
ahci_init_controller(host);
ahci_print_info(host, "platform");
- rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
- &ahci_platform_sht);
+ return ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+ &ahci_platform_sht);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_init_host);
+
+static int ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ const struct ata_port_info *pi_template;
+ struct ahci_host_priv *hpriv;
+ int rc;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ /*
+ * Some platforms might need to prepare for mmio region access,
+ * which could be done in the following init call. So, the mmio
+ * region shouldn't be accessed before init (if provided) has
+ * returned successfully.
+ */
+ if (pdata && pdata->init) {
+ rc = pdata->init(dev, hpriv->mmio);
+ if (rc)
+ goto disable_resources;
+ }
+
+ if (pdata && pdata->ata_port_info)
+ pi_template = pdata->ata_port_info;
+ else
+ pi_template = &ahci_port_info[id ? id->driver_data : 0];
+
+ rc = ahci_platform_init_host(pdev, hpriv, pi_template,
+ pdata ? pdata->force_port_map : 0,
+ pdata ? pdata->mask_port_map : 0);
if (rc)
goto pdata_exit;
@@ -221,12 +434,8 @@ static int ahci_probe(struct platform_de
pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
-disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
-free_clk:
- if (!IS_ERR(hpriv->clk))
- clk_put(hpriv->clk);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
return rc;
}
@@ -239,21 +448,30 @@ static void ahci_host_stop(struct ata_ho
if (pdata && pdata->exit)
pdata->exit(dev);
- if (!IS_ERR(hpriv->clk)) {
- clk_disable_unprepare(hpriv->clk);
- clk_put(hpriv->clk);
- }
+ ahci_platform_disable_resources(hpriv);
}
#ifdef CONFIG_PM_SLEEP
-static int ahci_suspend(struct device *dev)
+/**
+ * ahci_platform_suspend_host - Suspend an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to suspend an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be disabled after calling this.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend_host(struct device *dev)
{
- struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
- int rc;
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
@@ -270,61 +488,122 @@ static int ahci_suspend(struct device *d
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
- rc = ata_host_suspend(host, PMSG_SUSPEND);
+ return ata_host_suspend(host, PMSG_SUSPEND);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend_host);
+
+/**
+ * ahci_platform_resume_host - Resume an ahci-platform host
+ * @dev: device pointer for the host
+ *
+ * This function does all the usual steps needed to resume an
+ * ahci-platform host, note any necessary resources (ie clks, phy, etc.)
+ * must be initialized / enabled before calling this.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume_host(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ int rc;
+
+ if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
+ rc = ahci_reset_controller(host);
+ if (rc)
+ return rc;
+
+ ahci_init_controller(host);
+ }
+
+ ata_host_resume(host);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_resume_host);
+
+/**
+ * ahci_platform_suspend - Suspend an ahci-platform device
+ * @dev: the platform device to suspend
+ *
+ * This function suspends the host associated with the device, followed
+ * by disabling all the resources of the device.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_suspend(struct device *dev)
+{
+ struct ahci_platform_data *pdata = dev_get_platdata(dev);
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+ rc = ahci_platform_suspend_host(dev);
if (rc)
return rc;
if (pdata && pdata->suspend)
return pdata->suspend(dev);
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
+ ahci_platform_disable_resources(hpriv);
return 0;
}
+EXPORT_SYMBOL_GPL(ahci_platform_suspend);
-static int ahci_resume(struct device *dev)
+/**
+ * ahci_platform_resume - Resume an ahci-platform device
+ * @dev: the platform device to resume
+ *
+ * This function enables all the resources of the device followed by
+ * resuming the host associated with the device.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_resume(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
- if (!IS_ERR(hpriv->clk)) {
- rc = clk_prepare_enable(hpriv->clk);
- if (rc) {
- dev_err(dev, "clock prepare enable failed");
- return rc;
- }
- }
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
if (rc)
- goto disable_unprepare_clk;
- }
-
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
- goto disable_unprepare_clk;
-
- ahci_init_controller(host);
+ goto disable_resources;
}
- ata_host_resume(host);
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
+ goto disable_resources;
return 0;
-disable_unprepare_clk:
- if (!IS_ERR(hpriv->clk))
- clk_disable_unprepare(hpriv->clk);
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
return rc;
}
+EXPORT_SYMBOL_GPL(ahci_platform_resume);
#endif
-static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -19,7 +19,15 @@
struct device;
struct ata_port_info;
+struct ahci_host_priv;
+struct platform_device;
+/*
+ * Note ahci_platform_data is deprecated, it is only kept around for use
+ * by the old da850 and spear13xx ahci code.
+ * New drivers should instead declare their own platform_driver struct, and
+ * use ahci_platform* functions in their own probe, suspend and resume methods.
+ */
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
void (*exit)(struct device *dev);
@@ -30,4 +38,21 @@ struct ahci_platform_data {
unsigned int mask_port_map;
};
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev);
+int ahci_platform_init_host(struct platform_device *pdev,
+ struct ahci_host_priv *hpriv,
+ const struct ata_port_info *pi_template,
+ unsigned int force_port_map,
+ unsigned int mask_port_map);
+
+int ahci_platform_suspend_host(struct device *dev);
+int ahci_platform_resume_host(struct device *dev);
+int ahci_platform_suspend(struct device *dev);
+int ahci_platform_resume(struct device *dev);
+
#endif /* _AHCI_PLATFORM_H */