openwrt-owl

Go to file

John Crispin 22c5f96c6b ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x Some u-boot versions for QCA955x change the delays based on the link speed during boot. This usually breaks the support of other linkspeeds when OpenWrt is booted. It also conflicts with the at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own values in QCA955X_GMAC_REG_ETH_CFG. The default RGMII values from the Atheros u-boot are currently used to preset the existing mach files. These may have to be adjusted for boards using different values but which are not currently set them explicitely in OpenWrt. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Christian Beier <cb@shoutrlabs.com> Cc: Chris R Blake <chrisrblake93@gmail.com> Cc: Benjamin Berg <benjamin@sipsolutions.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> Cc: Matthias Schiffer <mschiffer@universe-factory.net> Cc: Dirk Neukirchen <dirkneukirchen@web.de> Cc: Christian Mehlis <christian@m3hlis.de> Cc: Luka Perkov <luka@openwrt.org> Cc: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 49029		2016-03-16 09:27:08 +00:00
config	build: don't add -fno-plt for ARC	2016-02-07 13:29:16 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	include: add Cortex-A53 CPU_TYPE	2016-03-08 18:11:37 +00:00
package	ramips: Add support for Xiaomi MiWiFi Nano	2016-03-16 09:26:48 +00:00
scripts	scripts/download.pl: fix sha256 hash command (#21931 )	2016-02-27 16:20:06 +00:00
target	ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x	2016-03-16 09:27:08 +00:00
toolchain	toolchain/gdb: Update to 7.11	2016-03-10 19:11:41 +00:00
tools	ar71xx: Add support for the OMYlink OMY-X1	2016-03-16 09:26:58 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	Makefile: set timezone to UTC	2016-01-28 22:42:18 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
rules.mk	build: disable the use of -iremap for UML (#21851 )	2016-02-13 22:23:32 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org