openwrt-owl/target/linux/ifxmips/patches-2.6.32/110-drivers.patch

122 lines
3.6 KiB
Diff

--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1383,6 +1383,14 @@ config SERIAL_OF_PLATFORM_NWPSERIAL_CONS
help
Support for Console on the NWP serial ports.
+config SERIAL_IFXMIPS
+ bool "IFXMips serial driver"
+ depends on IFXMIPS
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ Driver for the ifxmipss built in ASC hardware
+
config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
depends on QUICC_ENGINE
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -81,3 +81,4 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks
obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips.o
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -343,6 +343,12 @@ config MACB
source "drivers/net/arm/Kconfig"
+config IFXMIPS_MII0
+ tristate "Infineon IFXMips eth0 driver"
+ depends on IFXMIPS
+ help
+ Support for the MII0 inside the IFXMips SOC
+
config AX88796
tristate "ASIX AX88796 NE2000 clone support"
depends on ARM || MIPS || SUPERH
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -247,6 +247,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o
+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips.o
obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -259,6 +259,12 @@ config MTD_ALCHEMY
help
Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+config MTD_IFXMIPS
+ tristate "IFXMIPS MTD support"
+ depends on IFXMIPS
+ help
+ Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -61,3 +61,4 @@ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-asy
obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
+obj-$(CONFIG_MTD_IFXMIPS) += ifxmips.o
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -850,6 +850,12 @@ config TXX9_WDT
help
Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+config IFXMIPS_WDT
+ bool "IFXMips watchdog"
+ depends on IFXMIPS
+ help
+ Hardware driver for the IFXMIPS Watchdog Timer.
+
# PARISC Architecture
# POWERPC Architecture
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -113,6 +113,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips.o
# PARISC Architecture
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -236,6 +236,12 @@ config LEDS_BD2802
This option enables support for BD2802GU RGB LED driver chips
accessed via the I2C bus.
+config LEDS_IFXMIPS
+ tristate "LED Support for IFXMIPS LEDs"
+ depends on LEDS_CLASS && IFXMIPS
+ help
+ This option enables support for the CM-X270 LEDs.
+
comment "LED Triggers"
config LEDS_TRIGGERS
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
+obj-$(CONFIG_LEDS_IFXMIPS) += leds-ifxmips.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o