openwrt-owl/target/linux/ar71xx/patches-3.10/624-MIPS-ath79-WNR2200-supp...

40 lines
1.4 KiB
Diff

--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -128,6 +128,7 @@ enum ath79_mach_type {
ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
+ ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
ATH79_MACH_WP543, /* Compex WP543 */
ATH79_MACH_WPE72, /* Compex WPE72 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -437,6 +437,16 @@ config ATH79_MACH_WNR2000_V3
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
+ config ATH79_MACH_WNR2200
+ bool "NETGEAR WNR2200 board support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
config ATH79_MACH_OM2P
bool "OpenMesh OM2P board support"
select SOC_AR724X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -105,6 +105,7 @@ obj-$(CONFIG_ATH79_MACH_WNDR3700) += mac
obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
+obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o