mirror of https://github.com/hak5/openwrt-owl.git
200 lines
4.8 KiB
C
200 lines
4.8 KiB
C
/*
|
|
* Platform independend driver for JZ4740.
|
|
*
|
|
* Copyright (c) 2007 Ingenic Semiconductor Inc.
|
|
* Author: <jlwei@ingenic.cn>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
#include <common.h>
|
|
|
|
#if defined(CONFIG_CMD_NAND) && defined(CONFIG_JZ4740)
|
|
|
|
#include <nand.h>
|
|
#include <asm/jz4740.h>
|
|
#include <asm/io.h>
|
|
|
|
#define PAR_SIZE 9
|
|
#define __nand_ecc_enable() (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST )
|
|
#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE)
|
|
|
|
#define __nand_select_rs_ecc() (REG_EMC_NFECR |= EMC_NFECR_RS)
|
|
|
|
#define __nand_rs_ecc_encoding() (REG_EMC_NFECR |= EMC_NFECR_RS_ENCODING)
|
|
#define __nand_rs_ecc_decoding() (REG_EMC_NFECR |= EMC_NFECR_RS_DECODING)
|
|
#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF))
|
|
#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF))
|
|
|
|
static void jz_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd->priv;
|
|
unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
/* Change this to use I/O accessors. */
|
|
if (ctrl & NAND_NCE)
|
|
REG_EMC_NFCSR |= EMC_NFCSR_NFCE1;
|
|
else
|
|
REG_EMC_NFCSR &= ~EMC_NFCSR_NFCE1;
|
|
}
|
|
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
if (ctrl & NAND_CLE)
|
|
nandaddr |= 0x00008000;
|
|
else /* must be ALE */
|
|
nandaddr |= 0x00010000;
|
|
|
|
writeb(cmd, (uint8_t *)nandaddr);
|
|
}
|
|
|
|
static int jz_device_ready(struct mtd_info *mtd)
|
|
{
|
|
int ready;
|
|
udelay(20); /* FIXME: add 20us delay */
|
|
ready = (REG_GPIO_PXPIN(2) & 0x40000000) ? 1 : 0;
|
|
return ready;
|
|
}
|
|
|
|
/*
|
|
* EMC setup
|
|
*/
|
|
static void jz_device_setup(void)
|
|
{
|
|
/* Set NFE bit */
|
|
REG_EMC_NFCSR |= EMC_NFCSR_NFE1;
|
|
REG_EMC_SMCR1 = 0x094c4400;
|
|
/* REG_EMC_SMCR3 = 0x04444400; */
|
|
}
|
|
|
|
void board_nand_select_device(struct nand_chip *nand, int chip)
|
|
{
|
|
/*
|
|
* Don't use "chip" to address the NAND device,
|
|
* generate the cs from the address where it is encoded.
|
|
*/
|
|
}
|
|
|
|
static int jzsoc_nand_calculate_rs_ecc(struct mtd_info* mtd, const u_char* dat,
|
|
u_char* ecc_code)
|
|
{
|
|
volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0;
|
|
short i;
|
|
|
|
__nand_ecc_encode_sync()
|
|
__nand_ecc_disable();
|
|
|
|
for(i = 0; i < PAR_SIZE; i++)
|
|
ecc_code[i] = *paraddr++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void jzsoc_nand_enable_rs_hwecc(struct mtd_info* mtd, int mode)
|
|
{
|
|
__nand_ecc_enable();
|
|
__nand_select_rs_ecc();
|
|
|
|
REG_EMC_NFINTS = 0x0;
|
|
if (NAND_ECC_READ == mode){
|
|
__nand_rs_ecc_decoding();
|
|
}
|
|
if (NAND_ECC_WRITE == mode){
|
|
__nand_rs_ecc_encoding();
|
|
}
|
|
}
|
|
|
|
/* Correct 1~9-bit errors in 512-bytes data */
|
|
static void jzsoc_rs_correct(unsigned char *dat, int idx, int mask)
|
|
{
|
|
int i;
|
|
|
|
idx--;
|
|
|
|
i = idx + (idx >> 3);
|
|
if (i >= 512)
|
|
return;
|
|
|
|
mask <<= (idx & 0x7);
|
|
|
|
dat[i] ^= mask & 0xff;
|
|
if (i < 511)
|
|
dat[i+1] ^= (mask >> 8) & 0xff;
|
|
}
|
|
|
|
static int jzsoc_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
|
|
u_char *read_ecc, u_char *calc_ecc)
|
|
{
|
|
volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0;
|
|
short k;
|
|
u32 stat;
|
|
/* Set PAR values */
|
|
|
|
for (k = 0; k < PAR_SIZE; k++) {
|
|
*paraddr++ = read_ecc[k];
|
|
}
|
|
|
|
/* Set PRDY */
|
|
REG_EMC_NFECR |= EMC_NFECR_PRDY;
|
|
|
|
/* Wait for completion */
|
|
__nand_ecc_decode_sync();
|
|
__nand_ecc_disable();
|
|
|
|
/* Check decoding */
|
|
stat = REG_EMC_NFINTS;
|
|
if (stat & EMC_NFINTS_ERR) {
|
|
if (stat & EMC_NFINTS_UNCOR) {
|
|
printk("Uncorrectable error occurred\n");
|
|
return -1;
|
|
}
|
|
else {
|
|
u32 errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
|
|
switch (errcnt) {
|
|
case 4:
|
|
jzsoc_rs_correct(dat, (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
|
|
case 3:
|
|
jzsoc_rs_correct(dat, (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
|
|
case 2:
|
|
jzsoc_rs_correct(dat, (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
|
|
case 1:
|
|
jzsoc_rs_correct(dat, (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
/* no error need to be correct */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Main initialization routine
|
|
*/
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
jz_device_setup();
|
|
|
|
nand->cmd_ctrl = jz_hwcontrol;
|
|
nand->dev_ready = jz_device_ready;
|
|
|
|
/* FIXME: should use NAND_ECC_SOFT */
|
|
nand->ecc.hwctl = jzsoc_nand_enable_rs_hwecc;
|
|
nand->ecc.correct = jzsoc_nand_rs_correct_data;
|
|
nand->ecc.calculate = jzsoc_nand_calculate_rs_ecc;
|
|
nand->ecc.mode = NAND_ECC_HW;
|
|
nand->ecc.size = 512;
|
|
nand->ecc.bytes = 9;
|
|
|
|
/* 20 us command delay time */
|
|
nand->chip_delay = 20;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* (CONFIG_SYS_CMD_NAND) */
|