hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
11,525 Commits
4 Branches
8 Tags
169 MiB
C 66.6%
Makefile 16.7%
Shell 8%
Roff 2.7%
Perl 2.1%
Other 3.8%
 
 
 
 
 
 
Go to file
Florian Fainelli 1ccffe43f2 remove 2.6.27 patches 
SVN-Revision: 16894
 		2009-07-18 10:33:53 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include get rid of linux 2.6.29 2009-07-17 16:20:25 +00:00
package download and install rt2870 firmware (#5519) 2009-07-18 10:10:32 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target remove 2.6.27 patches 2009-07-18 10:33:53 +00:00
toolchain This patch adds a target for the IBM PowerXCell Accelerator Board. (aka mvXCell-8i from MatrixVision or GigaAccel 180 from Fixstars) 2009-07-16 10:19:13 +00:00
tools firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>) 2009-07-12 08:59:18 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
rules.mk add a config option to select the binary stripping method to use (between none, strip & sstrip) 2009-07-07 02:34:58 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org