openwrt-owl

Go to file

Felix Fietkau 1a7a36b0a4 mac80211: fix frames looping back to a wds station SVN-Revision: 25008		2011-01-15 13:41:10 +00:00
docs	docs: fix a counting fail	2010-05-29 13:11:48 +00:00
include	kernel: add md5sum of kernel 2.6.37	2011-01-08 13:10:35 +00:00
package	mac80211: fix frames looping back to a wds station	2011-01-15 13:41:10 +00:00
scripts	download.pl: pass --no-check-certificate to wget	2010-12-18 20:54:53 +00:00
target	move irq.c from patch into own file	2011-01-15 03:32:16 +00:00
toolchain	add explicit dependencies between gcc prepare stages, fixes source download race with make -j (#8596 )	2011-01-12 15:44:53 +00:00
tools	mklibs: import missing symbol workaround from Freetz project (#7590 )	2011-01-14 10:49:41 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	remove 2.6.25 support	2010-11-22 13:43:32 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
rules.mk	- implement hooks for hostbuilds - use host build hooks to implement fixups for host build - move separator declaration to rules.mk	2010-12-13 19:04:33 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org