mirror of https://github.com/hak5/openwrt-owl.git
84 lines
2.8 KiB
Diff
84 lines
2.8 KiB
Diff
Content-Type: text/plain; charset="utf-8"
|
|
MIME-Version: 1.0
|
|
Content-Transfer-Encoding: 7bit
|
|
Subject: [v3,
|
|
1/5] mtd: nand: Create a BBT flag to access bad block markers in raw
|
|
mode
|
|
From: Archit Taneja <architt@codeaurora.org>
|
|
X-Patchwork-Id: 6927081
|
|
Message-Id: <1438578498-32254-2-git-send-email-architt@codeaurora.org>
|
|
To: linux-mtd@lists.infradead.org, dehrenberg@google.com,
|
|
cernekee@gmail.com, computersforpeace@gmail.com
|
|
Cc: linux-arm-msm@vger.kernel.org, agross@codeaurora.org,
|
|
sboyd@codeaurora.org, linux-kernel@vger.kernel.org,
|
|
Archit Taneja <architt@codeaurora.org>
|
|
Date: Mon, 3 Aug 2015 10:38:14 +0530
|
|
|
|
Some controllers can access the factory bad block marker from OOB only
|
|
when they read it in raw mode. When ECC is enabled, these controllers
|
|
discard reading/writing bad block markers, preventing access to them
|
|
altogether.
|
|
|
|
The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks.
|
|
This results in the nand driver's ecc->read_oob() op to be called, which
|
|
works with ECC enabled.
|
|
|
|
Create a new BBT option flag that tells nand_bbt to force the mode to
|
|
MTD_OPS_RAW. This would result in the correct op being called for the
|
|
underlying nand controller driver.
|
|
|
|
Reviewed-by: Andy Gross <agross@codeaurora.org>
|
|
Signed-off-by: Archit Taneja <architt@codeaurora.org>
|
|
|
|
---
|
|
drivers/mtd/nand/nand_base.c | 6 +++++-
|
|
drivers/mtd/nand/nand_bbt.c | 6 +++++-
|
|
include/linux/mtd/bbm.h | 7 +++++++
|
|
3 files changed, 17 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/mtd/nand/nand_base.c
|
|
+++ b/drivers/mtd/nand/nand_base.c
|
|
@@ -394,7 +394,11 @@ static int nand_default_block_markbad(st
|
|
} else {
|
|
ops.len = ops.ooblen = 1;
|
|
}
|
|
- ops.mode = MTD_OPS_PLACE_OOB;
|
|
+
|
|
+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
|
|
+ ops.mode = MTD_OPS_RAW;
|
|
+ else
|
|
+ ops.mode = MTD_OPS_PLACE_OOB;
|
|
|
|
/* Write to first/last page(s) if necessary */
|
|
if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
|
|
--- a/drivers/mtd/nand/nand_bbt.c
|
|
+++ b/drivers/mtd/nand/nand_bbt.c
|
|
@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
|
|
ops.oobbuf = buf;
|
|
ops.ooboffs = 0;
|
|
ops.datbuf = NULL;
|
|
- ops.mode = MTD_OPS_PLACE_OOB;
|
|
+
|
|
+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
|
|
+ ops.mode = MTD_OPS_RAW;
|
|
+ else
|
|
+ ops.mode = MTD_OPS_PLACE_OOB;
|
|
|
|
for (j = 0; j < numpages; j++) {
|
|
/*
|
|
--- a/include/linux/mtd/bbm.h
|
|
+++ b/include/linux/mtd/bbm.h
|
|
@@ -116,6 +116,12 @@ struct nand_bbt_descr {
|
|
#define NAND_BBT_NO_OOB_BBM 0x00080000
|
|
|
|
/*
|
|
+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
|
|
+ * be used by controllers which can access BBM only when ECC is disabled, i.e,
|
|
+ * when in RAW access mode
|
|
+ */
|
|
+#define NAND_BBT_ACCESS_BBM_RAW 0x00100000
|
|
+/*
|
|
* Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
|
|
* was allocated dynamicaly and must be freed in nand_release(). Has no meaning
|
|
* in nand_chip.bbt_options.
|