openwrt-owl

Go to file

Felix Fietkau 19cb0b3693 fix lua cflags SVN-Revision: 10971		2008-04-28 22:00:57 +00:00
docs	Fix docs build from a clean checkout, closes #2975	2008-01-07 07:16:00 +00:00
include	upgrade to 2.6.24.5	2008-04-28 10:23:36 +00:00
package	fix lua cflags	2008-04-28 22:00:57 +00:00
scripts	add a gpio feature for devices supporting the generic GPIO interface	2008-04-20 09:46:45 +00:00
target	allow bigger packets in the marvell switch (does not fix the mtu problems yet)	2008-04-28 21:59:06 +00:00
toolchain	add preliminary support for Storm SL3512 based devices, not ready yet	2008-04-27 17:03:01 +00:00
tools	Create a dummy sit package for 2.4 kernelsq	2008-03-27 15:44:14 +00:00
.gitignore	add package/openwrt-packages to .gitignore	2008-02-09 16:01:34 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add feature flag for the cpio.gz support	2008-01-29 13:56:43 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	fix package/symlinks target, will call scripts/feeds update / install introduce new package/symlinks-install and package/symlinks-clean targets - package/symlink-install will re-create the index files and the symlinks for all ./feeds (no update from repositories is performed) - package/symlink-clean will delete all installed symlinks (keeping the ./feeds untouched)	2008-03-20 17:08:24 +00:00
README	add information about the tex4ht requirement for the docs	2007-02-26 01:06:41 +00:00
feeds.conf	Switched xwrt url in feeds.conf (berlios http falls over occasionally)	2008-03-02 22:07:46 +00:00
rules.mk	$(TARGET) is not anymore, replace it with $(ARCH) in ./bin/packages subdirectories until we find something better	2008-04-15 02:17:38 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org