openwrt-owl/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c

155 lines
4.1 KiB
C

/*
* ALFA Network AP96 board support
*
* Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/mmc_spi.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "machtypes.h"
#include "pci.h"
#define ALFA_AP96_GPIO_PCIE_RESET 2
#define ALFA_AP96_GPIO_SIM_DETECT 3
#define ALFA_AP96_GPIO_MICROSD_CD 4
#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
#define ALFA_AP96_GPIO_BUTTON_RESET 11
#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
.gpio = ALFA_AP96_GPIO_BUTTON_RESET,
.active_low = 1,
}
};
static int alfa_ap96_mmc_get_cd(struct device *dev)
{
return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD);
}
static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
.get_cd = alfa_ap96_mmc_get_cd,
.caps = MMC_CAP_NEEDS_POLL,
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
};
static struct ath79_spi_controller_data ap96_spi0_cdata = {
.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
.cs_line = 0,
.is_flash = true,
};
static struct ath79_spi_controller_data ap96_spi1_cdata = {
.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
.cs_line = 1,
};
static struct ath79_spi_controller_data ap96_spi2_cdata = {
.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
.cs_line = 2,
};
static struct spi_board_info alfa_ap96_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.controller_data = &ap96_spi0_cdata
}, {
.bus_num = 0,
.chip_select = 1,
.max_speed_hz = 25000000,
.modalias = "mmc_spi",
.platform_data = &alfa_ap96_mmc_data,
.controller_data = &ap96_spi1_cdata
}, {
.bus_num = 0,
.chip_select = 2,
.max_speed_hz = 6250000,
.modalias = "rtc-pcf2123",
.controller_data = &ap96_spi2_cdata
},
};
static struct ath79_spi_platform_data alfa_ap96_spi_data = {
.bus_num = 0,
.num_chipselect = 3,
};
static void __init alfa_ap96_gpio_setup(void)
{
ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
AR71XX_GPIO_FUNC_SPI_CS2_EN);
gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
}
#define ALFA_AP96_WAN_PHYMASK BIT(4)
#define ALFA_AP96_LAN_PHYMASK BIT(5)
#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
static void __init alfa_ap96_init(void)
{
alfa_ap96_gpio_setup();
ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
ath79_eth1_pll_data.pll_1000 = 0x110000;
ath79_register_eth(0);
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
ath79_eth1_pll_data.pll_1000 = 0x110000;
ath79_register_eth(1);
ath79_register_pci();
ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
ARRAY_SIZE(alfa_ap96_spi_info));
ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
ARRAY_SIZE(alfa_ap96_gpio_keys),
alfa_ap96_gpio_keys);
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
alfa_ap96_init);