mirror of https://github.com/hak5/openwrt-owl.git
338 lines
6.7 KiB
Plaintext
338 lines
6.7 KiB
Plaintext
#include "vr9.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &power;
|
|
led-failsafe = &power;
|
|
led-running = &power;
|
|
|
|
led-usb = &usb1;
|
|
led-usb2 = &usb2;
|
|
};
|
|
|
|
memory@0 {
|
|
reg = <0x0 0x4000000>;
|
|
};
|
|
|
|
fpi@10000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "lantiq,fpi", "simple-bus";
|
|
ranges = <0x0 0x10000000 0xEEFFFFF>;
|
|
reg = <0x10000000 0xEF00000>;
|
|
|
|
localbus@0 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "lantiq,localbus", "simple-bus";
|
|
|
|
};
|
|
|
|
gpio: pinmux@E100B10 {
|
|
compatible = "lantiq,pinctrl-xr9";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
interrupt-parent = <&icu0>;
|
|
interrupts = <166 135 66 40 41 42 38>;
|
|
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0xE100B10 0xA0>;
|
|
|
|
state_default: pinmux {
|
|
exin3 {
|
|
lantiq,groups = "exin3";
|
|
lantiq,function = "exin";
|
|
};
|
|
stp {
|
|
lantiq,groups = "stp";
|
|
lantiq,function = "stp";
|
|
};
|
|
nand {
|
|
lantiq,groups = "nand cle", "nand ale",
|
|
"nand rd", "nand rdy";
|
|
lantiq,function = "ebu";
|
|
};
|
|
mdio {
|
|
lantiq,groups = "mdio";
|
|
lantiq,function = "mdio";
|
|
};
|
|
pci {
|
|
lantiq,groups = "gnt1", "req1";
|
|
lantiq,function = "pci";
|
|
};
|
|
conf_out {
|
|
lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
|
|
"io4", "io5", "io6", /* stp */
|
|
"io21",
|
|
"io33";
|
|
lantiq,open-drain;
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
pcie-rst {
|
|
lantiq,pins = "io38";
|
|
lantiq,pull = <0>;
|
|
lantiq,output = <1>;
|
|
};
|
|
conf_in {
|
|
lantiq,pins = "io39", /* exin3 */
|
|
"io48"; /* nand rdy */
|
|
lantiq,pull = <2>;
|
|
};
|
|
};
|
|
pins_spi_default: pins_spi_default {
|
|
spi_in {
|
|
lantiq,groups = "spi_di";
|
|
lantiq,function = "spi";
|
|
};
|
|
spi_out {
|
|
lantiq,groups = "spi_do", "spi_clk",
|
|
"spi_cs4";
|
|
lantiq,function = "spi";
|
|
lantiq,output = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
stp: stp@E100BB0 {
|
|
compatible = "lantiq,gpio-stp-xway";
|
|
reg = <0xE100BB0 0x40>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
lantiq,shadow = <0xffff>;
|
|
lantiq,groups = <0x7>;
|
|
lantiq,dsl = <0x3>;
|
|
lantiq,phy1 = <0x7>;
|
|
lantiq,phy2 = <0x7>;
|
|
/* lantiq,rising; */
|
|
};
|
|
|
|
ifxhcd@E101000 {
|
|
status = "okay";
|
|
gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
|
|
lantiq,portmask = <0x3>;
|
|
};
|
|
|
|
pci@E105400 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
compatible = "lantiq,pci-xway1";
|
|
bus-range = <0x0 0x0>;
|
|
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
|
|
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
|
|
reg = <0x7000000 0x8000 /* config space */
|
|
0xE105400 0x400>; /* pci bridge */
|
|
lantiq,bus-clock = <33333333>;
|
|
/*lantiq,external-clock;*/
|
|
lantiq,delay-hi = <0>; /* 0ns delay */
|
|
lantiq,delay-lo = <0>; /* 0.0ns delay */
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
|
|
>;
|
|
gpios-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
|
req-mask = <0x1>; /* GNT1 */
|
|
};
|
|
};
|
|
|
|
gphy-xrx200 {
|
|
compatible = "lantiq,phy-xrx200";
|
|
firmware1 = "lantiq/vr9_phy11g_a1x.bin";
|
|
firmware2 = "lantiq/vr9_phy11g_a2x.bin";
|
|
phys = [ 00 01 ];
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <100>;
|
|
/* reset {
|
|
label = "reset";
|
|
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};*/
|
|
paging {
|
|
label = "paging";
|
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
|
|
power: power {
|
|
label = "easy80920:green:power";
|
|
gpios = <&stp 9 GPIO_ACTIVE_HIGH>;
|
|
default-state = "keep";
|
|
};
|
|
warning {
|
|
label = "easy80920:green:warning";
|
|
gpios = <&stp 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
fxs1 {
|
|
label = "easy80920:green:fxs1";
|
|
gpios = <&stp 21 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
fxs2 {
|
|
label = "easy80920:green:fxs2";
|
|
gpios = <&stp 20 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
fxo {
|
|
label = "easy80920:green:fxo";
|
|
gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
usb1: usb1 {
|
|
label = "easy80920:green:usb1";
|
|
gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
usb2: usb2 {
|
|
label = "easy80920:green:usb2";
|
|
gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
sd {
|
|
label = "easy80920:green:sd";
|
|
gpios = <&stp 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
wps {
|
|
label = "easy80920:green:wps";
|
|
gpios = <&stp 12 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pins_spi_default>;
|
|
|
|
status = "ok";
|
|
|
|
m25p80@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <4 0>;
|
|
spi-max-frequency = <1000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x20000>;
|
|
label = "SPI (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@20000 {
|
|
reg = <0x20000 0x10000>;
|
|
label = "ENV_MAC";
|
|
read-only;
|
|
};
|
|
|
|
partition@30000 {
|
|
reg = <0x30000 0x10000>;
|
|
label = "DPF";
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
reg = <0x40000 0x10000>;
|
|
label = "NVRAM";
|
|
read-only;
|
|
};
|
|
|
|
partition@500000 {
|
|
reg = <0x50000 0x003a0000>;
|
|
label = "kernel";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
lan: interface@0 {
|
|
compatible = "lantiq,xrx200-pdi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
lantiq,switch;
|
|
|
|
ethernet@4 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <4>;
|
|
phynmode0 = "gmii";
|
|
phy-handle = <&phy13>;
|
|
};
|
|
ethernet@2 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <2>;
|
|
phy-mode = "gmii";
|
|
phy-handle = <&phy11>;
|
|
};
|
|
ethernet@1 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <1>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy1>;
|
|
};
|
|
ethernet@0 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <0>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
};
|
|
|
|
wan: interface@1 {
|
|
compatible = "lantiq,xrx200-pdi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
lantiq,wan;
|
|
|
|
ethernet@5 {
|
|
compatible = "lantiq,xrx200-pdi-port";
|
|
reg = <5>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy5>;
|
|
};
|
|
};
|
|
|
|
mdio@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "lantiq,xrx200-mdio";
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
};
|
|
phy5: ethernet-phy@5 {
|
|
reg = <0x5>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
};
|
|
phy11: ethernet-phy@11 {
|
|
reg = <0x11>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
};
|
|
phy13: ethernet-phy@13 {
|
|
reg = <0x13>;
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
};
|
|
};
|
|
};
|