mirror of https://github.com/hak5/openwrt-owl.git
108 lines
4.5 KiB
Diff
108 lines
4.5 KiB
Diff
From: Karsten Wiese <fzuuzf@googlemail.com>
|
|
Date: Wed, 22 Oct 2014 15:47:34 +0200
|
|
Subject: [PATCH] rtl8192cu: Prevent Ooops under rtl92c_set_fw_rsvdpagepkt
|
|
|
|
rtl92c_set_fw_rsvdpagepkt is used by rtl8192cu and its pci sibling rtl8192ce.
|
|
rtl_cmd_send_packet crashes when called inside rtl8192cu because it works on
|
|
memory allocated only by rtl8192ce.
|
|
Fix the crash by calling a dummy function when used in rtl8192cu.
|
|
Comparision with the realtek vendor driver makes me think, something is missing in
|
|
the dummy function.
|
|
Short test as WPA2 station show good results connected to an 802.11g basestation.
|
|
Traffic stops after few MBytes as WPA2 station connected to an 802.11n basestation.
|
|
|
|
Signed-off-by: Karsten Wiese <fzuuzf@googlemail.com>
|
|
---
|
|
|
|
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
|
|
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
|
|
@@ -656,7 +656,8 @@ static u8 reserved_page_packet[TOTAL_RES
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
};
|
|
|
|
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
|
|
+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw,
|
|
+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *))
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
|
|
@@ -722,7 +723,10 @@ void rtl92c_set_fw_rsvdpagepkt(struct ie
|
|
memcpy((u8 *)skb_put(skb, totalpacketlen),
|
|
&reserved_page_packet, totalpacketlen);
|
|
|
|
- rtstatus = rtl_cmd_send_packet(hw, skb);
|
|
+ if (cmd_send_packet)
|
|
+ rtstatus = cmd_send_packet(hw, skb);
|
|
+ else
|
|
+ rtstatus = rtl_cmd_send_packet(hw, skb);
|
|
|
|
if (rtstatus)
|
|
b_dlok = true;
|
|
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
|
|
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
|
|
@@ -109,7 +109,9 @@ void rtl92c_fill_h2c_cmd(struct ieee8021
|
|
u32 cmd_len, u8 *p_cmdbuffer);
|
|
void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
|
|
void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
|
|
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
|
|
+void rtl92c_set_fw_rsvdpagepkt
|
|
+ (struct ieee80211_hw *hw,
|
|
+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *));
|
|
void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
|
|
void usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, void *data, u16 len);
|
|
void rtl92c_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
|
|
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
|
|
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
|
|
@@ -459,7 +459,7 @@ void rtl92ce_set_hw_reg(struct ieee80211
|
|
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
|
|
tmp_reg422 & (~BIT(6)));
|
|
|
|
- rtl92c_set_fw_rsvdpagepkt(hw, 0);
|
|
+ rtl92c_set_fw_rsvdpagepkt(hw, NULL);
|
|
|
|
_rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
|
|
_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
|
|
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
|
|
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
|
|
@@ -1592,6 +1592,20 @@ void rtl92cu_get_hw_reg(struct ieee80211
|
|
}
|
|
}
|
|
|
|
+bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|
+{
|
|
+ /* Currently nothing happens here.
|
|
+ * Traffic stops after some seconds in WPA2 802.11n mode.
|
|
+ * Maybe because rtl8192cu chip should be set from here?
|
|
+ * If I understand correctly, the realtek vendor driver sends some urbs
|
|
+ * if its "here".
|
|
+ *
|
|
+ * This is maybe necessary:
|
|
+ * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
|
|
+ */
|
|
+ return true;
|
|
+}
|
|
+
|
|
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
|
|
{
|
|
struct rtl_priv *rtlpriv = rtl_priv(hw);
|
|
@@ -1939,7 +1953,8 @@ void rtl92cu_set_hw_reg(struct ieee80211
|
|
recover = true;
|
|
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
|
|
tmp_reg422 & (~BIT(6)));
|
|
- rtl92c_set_fw_rsvdpagepkt(hw, 0);
|
|
+ rtl92c_set_fw_rsvdpagepkt(hw,
|
|
+ &usb_cmd_send_packet);
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
|
|
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
|
|
if (recover)
|
|
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
|
|
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
|
|
@@ -104,7 +104,6 @@ bool rtl92cu_gpio_radio_on_off_checking(
|
|
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
|
|
int rtl92c_download_fw(struct ieee80211_hw *hw);
|
|
void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
|
|
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
|
|
void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
|
|
void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw,
|
|
u8 element_id, u32 cmd_len, u8 *p_cmdbuffer);
|