mirror of https://github.com/hak5/openwrt-owl.git
137 lines
3.1 KiB
Diff
137 lines
3.1 KiB
Diff
From 514647c9af870bd2df2e579134a26bff8d17b6b9 Mon Sep 17 00:00:00 2001
|
|
From: Dan Haab <dhaab@luxul.com>
|
|
Date: Sat, 14 Jan 2017 19:29:28 -0700
|
|
Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
|
|
|
|
Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
|
|
flash (for bootloader and NVRAM) and NAND flash (for firmware).
|
|
|
|
Signed-off-by: Dan Haab <dhaab@luxul.com>
|
|
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
|
|
2 files changed, 108 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
|
bcm47081-buffalo-wzr-600dhp2.dtb \
|
|
bcm47081-buffalo-wzr-900dhp.dtb \
|
|
bcm47081-luxul-xap-1410.dtb \
|
|
+ bcm47081-luxul-xwr-1200.dtb \
|
|
bcm4709-asus-rt-ac87u.dtb \
|
|
bcm4709-buffalo-wxr-1900dhp.dtb \
|
|
bcm4709-netgear-r7000.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
|
|
@@ -0,0 +1,107 @@
|
|
+/*
|
|
+ * Copyright 2017 Luxul Inc.
|
|
+ *
|
|
+ * Licensed under the ISC license.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm47081.dtsi"
|
|
+#include "bcm5301x-nand-cs0-bch4.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
|
|
+ model = "Luxul XWR-1200 V1";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200";
|
|
+ };
|
|
+
|
|
+ memory {
|
|
+ reg = <0x00000000 0x08000000>;
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ power {
|
|
+ label = "bcm53xx:green:power";
|
|
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "default-on";
|
|
+ };
|
|
+
|
|
+ lan3 {
|
|
+ label = "bcm53xx:green:lan3";
|
|
+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+
|
|
+ lan4 {
|
|
+ label = "bcm53xx:green:lan4";
|
|
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+
|
|
+ wan {
|
|
+ label = "bcm53xx:green:wan";
|
|
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+
|
|
+ lan2 {
|
|
+ label = "bcm53xx:green:lan2";
|
|
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+
|
|
+ usb {
|
|
+ label = "bcm53xx:green:usb";
|
|
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+
|
|
+ status {
|
|
+ label = "bcm53xx:green:status";
|
|
+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "timer";
|
|
+ };
|
|
+
|
|
+ 2ghz {
|
|
+ label = "bcm53xx:green:2ghz";
|
|
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+
|
|
+ 5ghz {
|
|
+ label = "bcm53xx:green:5ghz";
|
|
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+
|
|
+ lan1 {
|
|
+ label = "bcm53xx:green:lan1";
|
|
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "none";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio-keys {
|
|
+ compatible = "gpio-keys";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ restart {
|
|
+ label = "Reset";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&usb2 {
|
|
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
|
+};
|
|
+
|
|
+&spi_nor {
|
|
+ status = "okay";
|
|
+};
|