mirror of https://github.com/hak5/openwrt-owl.git
147 lines
3.5 KiB
C
147 lines
3.5 KiB
C
/*
|
|
* NETGEAR R6100 board support
|
|
*
|
|
* Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/pci.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/platform/ar934x_nfc.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-nfc.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define R6100_GPIO_LED_WLAN 0
|
|
#define R6100_GPIO_LED_USB 11
|
|
#define R6100_GPIO_LED_WAN_GREEN 13
|
|
#define R6100_GPIO_LED_POWER_AMBER 14
|
|
#define R6100_GPIO_LED_WAN_AMBER 15
|
|
#define R6100_GPIO_LED_POWER_GREEN 17
|
|
|
|
#define R6100_GPIO_BTN_WIRELESS 1
|
|
#define R6100_GPIO_BTN_WPS 3
|
|
#define R6100_GPIO_BTN_RESET 12
|
|
|
|
#define R6100_GPIO_USB_POWER 16
|
|
|
|
#define R6100_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define R6100_KEYS_DEBOUNCE_INTERVAL (3 * R6100_KEYS_POLL_INTERVAL)
|
|
|
|
static struct gpio_led r6100_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "netgear:green:power",
|
|
.gpio = R6100_GPIO_LED_POWER_GREEN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "netgear:amber:power",
|
|
.gpio = R6100_GPIO_LED_POWER_AMBER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "netgear:green:wan",
|
|
.gpio = R6100_GPIO_LED_WAN_GREEN,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "netgear:amber:wan",
|
|
.gpio = R6100_GPIO_LED_WAN_AMBER,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "netgear:blue:usb",
|
|
.gpio = R6100_GPIO_LED_USB,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "netgear:blue:wlan",
|
|
.gpio = R6100_GPIO_LED_WLAN,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button r6100_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = R6100_GPIO_BTN_RESET,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.desc = "WPS button",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = R6100_GPIO_BTN_WPS,
|
|
.active_low = 0,
|
|
},
|
|
{
|
|
.desc = "RFKILL switch",
|
|
.type = EV_SW,
|
|
.code = KEY_RFKILL,
|
|
.debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = R6100_GPIO_BTN_WIRELESS,
|
|
.active_low = 0,
|
|
},
|
|
};
|
|
|
|
static void __init r6100_setup(void)
|
|
{
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(r6100_leds_gpio),
|
|
r6100_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, R6100_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(r6100_gpio_keys),
|
|
r6100_gpio_keys);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
/* GMAC0 is connected to the PHY0 of the internal switch */
|
|
ath79_switch_data.phy4_mii_en = 1;
|
|
ath79_switch_data.phy_poll_mask = BIT(0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to the internal switch */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_register_eth(1);
|
|
|
|
gpio_request_one(R6100_GPIO_USB_POWER,
|
|
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
|
"USB power");
|
|
|
|
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
|
|
ath79_register_nfc();
|
|
|
|
ath79_register_usb();
|
|
|
|
ath79_register_wmac_simple();
|
|
|
|
ap91_pci_init_simple();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_R6100, "R6100", "NETGEAR R6100",
|
|
r6100_setup);
|