hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt-owl/target/linux/brcm2708/patches-4.1/0154-BCM270X_DT-Add-pwm-and...

251 lines
8.2 KiB
Diff
Raw Blame History

From 9ace261c44e2a16d13305b34b06a56c1a4838dc5 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Mon, 17 Aug 2015 10:49:44 +0100
Subject: [PATCH 154/171] BCM270X_DT: Add pwm and pwm-2chan overlays
From the README entries:
Legal pin,function combinations for each channel:
PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
N.B.:
1) Pin 18 is the only one available on all platforms, and
it is the one used by the I2S audio interface.
Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
2) The onboard analogue audio output uses both PWM channels.
3) So be careful mixing audio and PWM.
4) Currently the clock must have been enabled and configured
by other means.
See: https://github.com/raspberrypi/linux/issues/756
---
arch/arm/boot/dts/bcm2708_common.dtsi | 16 +++++++++
arch/arm/boot/dts/overlays/Makefile | 2 ++
arch/arm/boot/dts/overlays/README | 41 +++++++++++++++++++++
arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts | 46 ++++++++++++++++++++++++
arch/arm/boot/dts/overlays/pwm-overlay.dts | 42 ++++++++++++++++++++++
arch/arm/configs/bcm2709_defconfig | 1 +
arch/arm/configs/bcmrpi_defconfig | 1 +
drivers/pwm/Kconfig | 2 +-
8 files changed, 150 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts
create mode 100644 arch/arm/boot/dts/overlays/pwm-overlay.dts
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -154,6 +154,14 @@
status = "disabled";
};
+ pwm: pwm@7e20c000 {
+ compatible = "brcm,bcm2835-pwm";
+ reg = <0x7e20c000 0x28>;
+ clocks = <&clk_pwm>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
uart1: uart@7e215040 {
compatible = "brcm,bcm2835-aux-uart", "ns16550";
reg = <0x7e215040 0x40>;
@@ -279,6 +287,14 @@
clock-output-names = "apb_pclk";
clock-frequency = <126000000>;
};
+
+ clk_pwm: clock@5 {
+ compatible = "fixed-clock";
+ reg = <3>;
+ #clock-cells = <0>;
+ clock-output-names = "pwm";
+ clock-frequency = <100000000>;
+ };
};
__overrides__ {
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -35,6 +35,8 @@ dtb-$(RPI_DT_OVERLAYS) += mz61581-overla
dtb-$(RPI_DT_OVERLAYS) += piscreen-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += pitft28-resistive-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += pps-gpio-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += pwm-overlay.dtb
+dtb-$(RPI_DT_OVERLAYS) += pwm-2chan-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += rpi-dac-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += rpi-display-overlay.dtb
dtb-$(RPI_DT_OVERLAYS) += rpi-ft5406-overlay.dtb
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -410,6 +410,47 @@ Load: dtoverlay=pps-gpio,<param>=<val>
Params: gpiopin Input GPIO (default "18")
+Name: pwm
+Info: Configures a single PWM channel
+ Legal pin,function combinations for each channel:
+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
+ N.B.:
+ 1) Pin 18 is the only one available on all platforms, and
+ it is the one used by the I2S audio interface.
+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
+ 2) The onboard analogue audio output uses both PWM channels.
+ 3) So be careful mixing audio and PWM.
+ 4) Currently the clock must have been enabled and configured
+ by other means.
+Load: dtoverlay=pwm-2chan,<param>=<val>
+Load: dtoverlay=pwm,<param>=<val>
+Params: pin Output pin (default 18) - see table
+ func Pin function (default 2 = Alt5) - see above
+ clock PWM clock frequency (informational)
+
+
+Name: pwm-2chan
+Info: Configures both PWM channels
+ Legal pin,function combinations for each channel:
+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
+ N.B.:
+ 1) Pin 18 is the only one available on all platforms, and
+ it is the one used by the I2S audio interface.
+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
+ 2) The onboard analogue audio output uses both PWM channels.
+ 3) So be careful mixing audio and PWM.
+ 4) Currently the clock must have been enabled and configured
+ by other means.
+Load: dtoverlay=pwm-2chan,<param>=<val>
+Params: pin Output pin (default 18) - see table
+ pin2 Output pin for other channel (default 19)
+ func Pin function (default 2 = Alt5) - see above
+ func2 Function for pin2 (default 2 = Alt5)
+ clock PWM clock frequency (informational)
+
+
Name: rpi-dac
Info: Configures the RPi DAC audio card
Load: dtoverlay=rpi-dac
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+/plugin/;
+
+/*
+This is the 2-channel overlay - only use it if you need both channels.
+
+Legal pin,function combinations for each channel:
+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
+
+N.B.:
+ 1) Pin 18 is the only one available on all platforms, and
+ it is the one used by the I2S audio interface.
+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
+ 2) The onboard analogue audio output uses both PWM channels.
+ 3) So be careful mixing audio and PWM.
+*/
+
+/ {
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ pwm_pins: pwm_pins {
+ brcm,pins = <18 19>;
+ brcm,function = <2 2>; /* Alt5 */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&pwm>;
+ __overlay__ {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ pin = <&pwm_pins>,"brcm,pins:0";
+ pin2 = <&pwm_pins>,"brcm,pins:4";
+ func = <&pwm_pins>,"brcm,function:0";
+ func2 = <&pwm_pins>,"brcm,function:4";
+ clock = <&clk_pwm>,"clock-frequency:0";
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+/plugin/;
+
+/*
+Legal pin,function combinations for each channel:
+ PWM0: 12,4(Alt0) 18,2(Alt5) 40,4(Alt0) 52,5(Alt1)
+ PWM1: 13,4(Alt0) 19,2(Alt5) 41,4(Alt0) 45,4(Alt0) 53,5(Alt1)
+
+N.B.:
+ 1) Pin 18 is the only one available on all platforms, and
+ it is the one used by the I2S audio interface.
+ Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
+ 2) The onboard analogue audio output uses both PWM channels.
+ 3) So be careful mixing audio and PWM.
+*/
+
+/ {
+ fragment@0 {
+ target = <&gpio>;
+ __overlay__ {
+ pwm_pins: pwm_pins {
+ brcm,pins = <18>;
+ brcm,function = <2>; /* Alt5 */
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&pwm>;
+ __overlay__ {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ status = "okay";
+ };
+ };
+
+ __overrides__ {
+ pin = <&pwm_pins>,"brcm,pins:0";
+ func = <&pwm_pins>,"brcm,function:0";
+ clock = <&clk_pwm>,"clock-frequency:0";
+ };
+};
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -1089,6 +1089,7 @@ CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=m
CONFIG_DHT11=m
+CONFIG_PWM_BCM2835=m
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -1082,6 +1082,7 @@ CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_KFIFO_BUF=m
CONFIG_DHT11=m
+CONFIG_PWM_BCM2835=m
CONFIG_RASPBERRYPI_FIRMWARE=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -85,7 +85,7 @@ config PWM_BCM_KONA
config PWM_BCM2835
tristate "BCM2835 PWM support"
- depends on ARCH_BCM2835
+ depends on ARCH_BCM2835 || ARCH_BCM2708 || ARCH_BCM2709
help
PWM framework driver for BCM2835 controller (Raspberry Pi)
Reference in New Issue View Git Blame Copy Permalink