hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt-owl/target/linux/sunxi/patches-3.12/191-add-sunxi-ahci.patch

437 lines
12 KiB
Diff
Raw Blame History

From b7f492ca20e480ea3402692e165f919f20145935 Mon Sep 17 00:00:00 2001
From: Oliver Schinagl <oliver@schinagl.nl>
Date: Tue, 3 Dec 2013 12:07:01 +0100
Subject: [PATCH] ARM: sunxi: Add an ahci-platform compatible AHCI driver for
the Allwinner SUNXi series of SoCs
This patch adds support for the sunxi series of SoC's by allwinner. It
plugs into the ahci-platform framework.
Note: Currently it uses a somewhat hackish approach that probably needs
a lot more work, but does the same as the IMX SoC's.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
---
.../devicetree/bindings/ata/ahci-sunxi.txt | 24 ++
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/ahci_platform.c | 12 +
drivers/ata/ahci_sunxi.c | 305 +++++++++++++++++++++
5 files changed, 351 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-sunxi.txt
create mode 100644 drivers/ata/ahci_sunxi.c
diff --git a/Documentation/devicetree/bindings/ata/ahci-sunxi.txt b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt
new file mode 100644
index 0000000..0792fa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-sunxi.txt
@@ -0,0 +1,24 @@
+Allwinner SUNXI AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "allwinner,sun4i-a10-ahci"
+- reg : <registers mapping>
+- interrupts : <interrupt mapping for AHCI IRQ>
+- clocks : clocks for ACHI
+- clock-names : clock names for AHCI
+
+Optional properties:
+- pwr-supply : regulator to control the power supply GPIO
+
+Example:
+ ahci@01c18000 {
+ compatible = "allwinner,sun4i-a10-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <0 56 1>;
+ clocks = <&ahb_gates 25>, <&pll6 0>;
+ clock-names = "ahb_sata", "pll6_sata";
+ pwr-supply = <&reg_ahci_5v>;
+ };
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 4e73772..b87e2ba 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_IMX
If unsure, say N.
+config AHCI_SUNXI
+ tristate "Allwinner sunxi AHCI SATA support"
+ depends on SATA_AHCI_PLATFORM && ARCH_SUNXI
+ help
+ This option enables support for the Allwinner sunxi SoC's
+ onboard AHCI SATA.
+
+ If unsure, say N.
+
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 46518c6..246050b 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
+obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 4b231ba..1046b44 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -31,6 +31,7 @@ enum ahci_type {
AHCI, /* standard platform ahci */
IMX53_AHCI, /* ahci on i.mx53 */
STRICT_AHCI, /* delayed DMA engine start */
+ SUNXI_AHCI, /* ahci on sunxi */
};
static struct platform_device_id ahci_devtype[] = {
@@ -44,6 +45,9 @@ enum ahci_type {
.name = "strict-ahci",
.driver_data = STRICT_AHCI,
}, {
+ .name = "sunxi-ahci",
+ .driver_data = SUNXI_AHCI,
+ }, {
/* sentinel */
}
};
@@ -81,6 +85,14 @@ struct ata_port_operations ahci_platform_ops = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
},
+ [SUNXI_AHCI] = {
+ AHCI_HFLAGS (AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
+ AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+ },
};
static struct scsi_host_template ahci_platform_sht = {
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
new file mode 100644
index 0000000..982641f
--- /dev/null
+++ b/drivers/ata/ahci_sunxi.c
@@ -0,0 +1,305 @@
+/*
+ * Allwinner sunxi AHCI SATA platform driver
+ * Copyright 2013 Olliver Schinagl <oliver@schinagl.nl>
+ *
+ * Based on the AHCI SATA platform driver by Freescale and Allwinner
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Daniel Wang <danielwang@allwinnertech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/gfp.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/errno.h>
+#include <linux/ahci_platform.h>
+#include "ahci.h"
+
+#define DRV_NAME "sunxi-sata"
+
+#define AHCI_BISTAFR 0x00a0
+#define AHCI_BISTCR 0x00a4
+#define AHCI_BISTFCTR 0x00a8
+#define AHCI_BISTSR 0x00ac
+#define AHCI_BISTDECR 0x00b0
+#define AHCI_DIAGNR0 0x00b4
+#define AHCI_DIAGNR1 0x00b8
+#define AHCI_OOBR 0x00bc
+#define AHCI_PHYCS0R 0x00c0
+#define AHCI_PHYCS1R 0x00c4
+#define AHCI_PHYCS2R 0x00c8
+#define AHCI_TIMER1MS 0x00e0
+#define AHCI_GPARAM1R 0x00e8
+#define AHCI_GPARAM2R 0x00ec
+#define AHCI_PPARAMR 0x00f0
+#define AHCI_TESTR 0x00f4
+#define AHCI_VERSIONR 0x00f8
+#define AHCI_IDR 0x00fc
+#define AHCI_RWCR 0x00fc
+#define AHCI_P0DMACR 0x0170
+#define AHCI_P0PHYCR 0x0178
+#define AHCI_P0PHYSR 0x017c
+
+struct sunxi_ahci_data {
+ struct platform_device *ahci_pdev;
+ struct regulator *regulator;
+ struct clk *sata_clk;
+ struct clk *ahb_clk;
+};
+
+static void sunxi_clrbits(void __iomem *reg, u32 clr_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ writel(reg_val, reg);
+}
+
+static void sunxi_setbits(void __iomem *reg, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static void sunxi_clrsetbits(void __iomem *reg, u32 clr_val, u32 set_val)
+{
+ u32 reg_val;
+
+ reg_val = readl(reg);
+ reg_val &= ~(clr_val);
+ reg_val |= set_val;
+ writel(reg_val, reg);
+}
+
+static u32 sunxi_getbits(void __iomem *reg, u8 mask, u8 shift)
+{
+ return (readl(reg) >> shift) & mask;
+}
+
+static int sunxi_ahci_phy_init(struct device *dev, void __iomem *reg_base)
+{
+ u32 reg_val;
+ int timeout;
+
+ /* This magic is from the original code */
+ writel(0, reg_base + AHCI_RWCR);
+ mdelay(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 24),
+ (0x5 << 24) | BIT(23) | BIT(18));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS1R,
+ (0x3 << 16) | (0x1f << 8) | (0x3 << 6),
+ (0x2 << 16) | (0x6 << 8) | (0x2 << 6));
+ sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(28) | BIT(15));
+ sunxi_clrbits(reg_base + AHCI_PHYCS1R, BIT(19));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
+ (0x7 << 20), (0x3 << 20));
+ sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
+ (0x1f << 5), (0x19 << 5));
+ mdelay(5);
+
+ sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
+
+ timeout = 0x100000;
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS0R, 0x7, 28);
+ } while (--timeout && (reg_val != 0x2));
+ if (!timeout)
+ dev_err(dev, "PHY power up failed.\n");
+
+ sunxi_setbits(reg_base + AHCI_PHYCS2R, (0x1 << 24));
+
+ timeout = 0x100000;
+ do {
+ reg_val = sunxi_getbits(reg_base + AHCI_PHYCS2R, 0x1, 24);
+ } while (--timeout && reg_val);
+ if (!timeout)
+ dev_err(dev, "PHY calibration failed.\n");
+ mdelay(15);
+
+ writel(0x7, reg_base + AHCI_RWCR);
+
+ return 0;
+}
+
+static int sunxi_ahci_init(struct device *dev, void __iomem *reg_base)
+{
+ struct sunxi_ahci_data *ahci_data;
+ int ret;
+
+ ahci_data = dev_get_drvdata(dev->parent);
+
+ ret = clk_prepare_enable(ahci_data->sata_clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_prepare_enable(ahci_data->ahb_clk);
+ if (ret < 0)
+ return ret;
+
+ ret = regulator_enable(ahci_data->regulator);
+ if (ret)
+ return ret;
+
+ return sunxi_ahci_phy_init(dev, reg_base);
+}
+
+static void sunxi_ahci_exit(struct device *dev)
+{
+ struct sunxi_ahci_data *ahci_data;
+
+ ahci_data = dev_get_drvdata(dev->parent);
+
+ regulator_disable(ahci_data->regulator);
+
+ clk_disable_unprepare(ahci_data->ahb_clk);
+ clk_disable_unprepare(ahci_data->sata_clk);
+}
+
+static struct ahci_platform_data sunxi_ahci_pdata = {
+ .init = sunxi_ahci_init,
+ .exit = sunxi_ahci_exit,
+};
+
+static int sunxi_ahci_remove(struct platform_device *pdev)
+{
+ struct sunxi_ahci_data *ahci_data;
+
+ ahci_data = platform_get_drvdata(pdev);
+ platform_device_unregister(ahci_data->ahci_pdev);
+
+ dev_dbg(&pdev->dev, "driver unloaded\n");
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_ahci_of_match[] = {
+ { .compatible = "allwinner,sun4i-a10-ahci", .data = &sunxi_ahci_pdata},
+ {/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sunxi_ahci_of_match);
+
+static int sunxi_ahci_probe(struct platform_device *pdev)
+{
+ const struct ahci_platform_data *pdata;
+ const struct of_device_id *of_dev_id;
+ struct resource *mem, *irq, res[2];
+ struct platform_device *ahci_pdev;
+ struct sunxi_ahci_data *ahci_data;
+ struct regulator *regulator;
+ int ret;
+
+ regulator = devm_regulator_get(&pdev->dev, "pwr");
+ if (IS_ERR(regulator)) {
+ ret = PTR_ERR(regulator);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "no regulator found (%d)\n", ret);
+ return ret;
+ }
+
+ ahci_data = devm_kzalloc(&pdev->dev, sizeof(*ahci_data), GFP_KERNEL);
+ if (!ahci_data)
+ return -ENOMEM;
+
+ ahci_pdev = platform_device_alloc("sunxi-ahci", -1);
+ if (!ahci_pdev)
+ return -ENODEV;
+
+ ahci_pdev->dev.parent = &pdev->dev;
+
+ ahci_data->regulator = regulator;
+ ahci_data->ahb_clk = devm_clk_get(&pdev->dev, "ahb_sata");
+ if (IS_ERR(ahci_data->ahb_clk)) {
+ ret = PTR_ERR(ahci_data->ahb_clk);
+ goto err_out;
+ }
+
+ ahci_data->sata_clk = devm_clk_get(&pdev->dev, "pll6_sata");
+ if (IS_ERR(ahci_data->sata_clk)) {
+ ret = PTR_ERR(ahci_data->sata_clk);
+ goto err_out;
+ }
+
+ ahci_data->ahci_pdev = ahci_pdev;
+ platform_set_drvdata(pdev, ahci_data);
+
+ ahci_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ ahci_pdev->dev.dma_mask = &ahci_pdev->dev.coherent_dma_mask;
+ ahci_pdev->dev.of_node = pdev->dev.of_node;
+
+ of_dev_id = of_match_device(sunxi_ahci_of_match, &pdev->dev);
+ if (of_dev_id) {
+ pdata = of_dev_id->data;
+ } else {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!mem || !irq) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+ res[0] = *mem;
+ res[1] = *irq;
+ ret = platform_device_add_resources(ahci_pdev, res, 2);
+ if (ret)
+ goto err_out;
+
+ ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
+ if (ret)
+ goto err_out;
+
+ ret = platform_device_add(ahci_pdev);
+ if (ret)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ platform_device_put(ahci_pdev);
+ return ret;
+}
+
+static struct platform_driver sunxi_ahci_driver = {
+ .probe = sunxi_ahci_probe,
+ .remove = sunxi_ahci_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = sunxi_ahci_of_match,
+ },
+};
+module_platform_driver(sunxi_ahci_driver);
+
+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA platform driver");
+MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("ahci:sunxi");
--
1.8.5.1
Reference in New Issue View Git Blame Copy Permalink