mirror of https://github.com/hak5/openwrt-owl.git
61 lines
1.9 KiB
Diff
61 lines
1.9 KiB
Diff
From a4c21089299ba411d998b16423a76cbae111194e Mon Sep 17 00:00:00 2001
|
|
From: Oliver Schinagl <oliver@schinagl.nl>
|
|
Date: Mon, 2 Dec 2013 16:13:32 +0100
|
|
Subject: [PATCH] RFC: AHCI: libahci is missing DMA
|
|
|
|
The Allwinner sunxi platforms have patched in the following to enable
|
|
DMA. This patch enables DMA controllers for the SUNXI Architecture.
|
|
|
|
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
|
|
---
|
|
drivers/ata/ahci.h | 6 ++++++
|
|
drivers/ata/libahci.c | 8 ++++++++
|
|
2 files changed, 14 insertions(+)
|
|
|
|
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
|
|
index 2289efd..2bf2423 100644
|
|
--- a/drivers/ata/ahci.h
|
|
+++ b/drivers/ata/ahci.h
|
|
@@ -138,6 +138,7 @@ enum {
|
|
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
|
|
PORT_FBS = 0x40, /* FIS-based Switching */
|
|
PORT_DEVSLP = 0x44, /* device sleep */
|
|
+ PORT_DMA = 0x70, /* direct memory access */
|
|
|
|
/* PORT_IRQ_{STAT,MASK} bits */
|
|
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
|
|
@@ -209,6 +210,11 @@ enum {
|
|
PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */
|
|
PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */
|
|
|
|
+ /* PORT_DMA bits */
|
|
+ PORT_DMA_SETUP_OFFSET = 8, /* dma setup offset */
|
|
+ PORT_DMA_SETUP_MASK = (0xff << PORT_DMA_SETUP_OFFSET),/* dma mask */
|
|
+ PORT_DMA_SETUP_INIT = (0x44 << 0),
|
|
+
|
|
/* hpriv->flags bits */
|
|
|
|
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
|
|
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
|
|
index c482f8c..d697a74 100644
|
|
--- a/drivers/ata/libahci.c
|
|
+++ b/drivers/ata/libahci.c
|
|
@@ -570,6 +570,14 @@ void ahci_start_engine(struct ata_port *ap)
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
+#ifdef CONFIG_ARCH_SUNXI
|
|
+ /* Setup DMA before DMA start */
|
|
+ tmp = readl(port_mmio + PORT_DMA);
|
|
+ tmp &= ~PORT_DMA_SETUP_MASK;
|
|
+ tmp |= PORT_DMA_SETUP_INIT << PORT_DMA_SETUP_OFFSET;
|
|
+ writel(tmp, port_mmio + PORT_DMA);
|
|
+#endif
|
|
+
|
|
/* start DMA */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_START;
|
|
--
|
|
1.8.5.1
|
|
|