mirror of https://github.com/hak5/openwrt-owl.git
547 lines
15 KiB
Diff
547 lines
15 KiB
Diff
From 0c9b05716ac0e597ae0f81a96ff68e54716decc9 Mon Sep 17 00:00:00 2001
|
|
From: John Crispin <blogic@openwrt.org>
|
|
Date: Wed, 13 Mar 2013 10:02:58 +0100
|
|
Subject: [PATCH 37/40] owrt: lantiq: wifi and ethernet eeprom handling
|
|
|
|
---
|
|
arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h | 6 +
|
|
.../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 +
|
|
arch/mips/lantiq/xway/Makefile | 3 +
|
|
arch/mips/lantiq/xway/ath_eep.c | 206 ++++++++++++++++++++
|
|
arch/mips/lantiq/xway/eth_mac.c | 76 ++++++++
|
|
arch/mips/lantiq/xway/pci-ath-fixup.c | 109 +++++++++++
|
|
arch/mips/lantiq/xway/rt_eep.c | 60 ++++++
|
|
drivers/net/ethernet/lantiq_etop.c | 10 +-
|
|
8 files changed, 469 insertions(+), 4 deletions(-)
|
|
create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
|
|
create mode 100644 arch/mips/lantiq/xway/ath_eep.c
|
|
create mode 100644 arch/mips/lantiq/xway/eth_mac.c
|
|
create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c
|
|
create mode 100644 arch/mips/lantiq/xway/rt_eep.c
|
|
|
|
--- /dev/null
|
|
+++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h
|
|
@@ -0,0 +1,6 @@
|
|
+#ifndef _PCI_ATH_FIXUP
|
|
+#define _PCI_ATH_FIXUP
|
|
+
|
|
+void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init;
|
|
+
|
|
+#endif /* _PCI_ATH_FIXUP */
|
|
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
|
|
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
|
|
@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev,
|
|
extern void ltq_pmu_enable(unsigned int module);
|
|
extern void ltq_pmu_disable(unsigned int module);
|
|
|
|
+/* allow the ethernet driver to load a flash mapped mac addr */
|
|
+const u8* ltq_get_eth_mac(void);
|
|
+
|
|
#endif /* CONFIG_SOC_TYPE_XWAY */
|
|
#endif /* _LTQ_XWAY_H__ */
|
|
--- a/arch/mips/lantiq/xway/Makefile
|
|
+++ b/arch/mips/lantiq/xway/Makefile
|
|
@@ -1,3 +1,6 @@
|
|
obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o
|
|
|
|
+obj-y += eth_mac.o
|
|
+obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o
|
|
+
|
|
obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
|
|
--- /dev/null
|
|
+++ b/arch/mips/lantiq/xway/ath_eep.c
|
|
@@ -0,0 +1,206 @@
|
|
+/*
|
|
+ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org>
|
|
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
|
|
+ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com>
|
|
+ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
+ * by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/etherdevice.h>
|
|
+#include <linux/ath5k_platform.h>
|
|
+#include <linux/ath9k_platform.h>
|
|
+#include <linux/pci.h>
|
|
+#include <pci-ath-fixup.h>
|
|
+
|
|
+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
|
|
+struct ath5k_platform_data ath5k_pdata;
|
|
+struct ath9k_platform_data ath9k_pdata = {
|
|
+ .led_pin = -1,
|
|
+};
|
|
+static u16 ath5k_eeprom_data[ATH5K_PLAT_EEP_MAX_WORDS];
|
|
+static u8 athxk_eeprom_mac[6];
|
|
+
|
|
+static int ath9k_pci_plat_dev_init(struct pci_dev *dev)
|
|
+{
|
|
+ dev->dev.platform_data = &ath9k_pdata;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+int __init of_ath9k_eeprom_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device_node *np = pdev->dev.of_node;
|
|
+ struct resource *eep_res, *mac_res;
|
|
+ void __iomem *eep, *mac;
|
|
+ int mac_offset;
|
|
+ u32 mac_inc = 0, pci_slot = 0;
|
|
+ int i;
|
|
+ u16 *eepdata, sum, el;
|
|
+
|
|
+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
+
|
|
+ if (!eep_res) {
|
|
+ dev_err(&pdev->dev, "failed to load eeprom address\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS) {
|
|
+ dev_err(&pdev->dev, "eeprom has an invalid size\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ eep = ioremap(eep_res->start, resource_size(eep_res));
|
|
+ memcpy_fromio(ath9k_pdata.eeprom_data, eep, ATH9K_PLAT_EEP_MAX_WORDS);
|
|
+
|
|
+ if (of_find_property(np, "ath,eep-swap", NULL)) {
|
|
+ ath9k_pdata.endian_check = true;
|
|
+
|
|
+ dev_info(&pdev->dev, "endian check enabled.\n");
|
|
+ }
|
|
+
|
|
+ if (of_find_property(np, "ath,eep-csum", NULL)) {
|
|
+ sum = ath9k_pdata.eeprom_data[0x200>>1];
|
|
+ el = sum / sizeof(u16) - 2; /* skip length and (old) checksum */
|
|
+ eepdata = (u16 *) (&ath9k_pdata.eeprom_data[0x204>>1]); /* after checksum */
|
|
+ for (i = 0; i < el; i++)
|
|
+ sum ^= *eepdata++;
|
|
+ sum ^= 0xffff;
|
|
+ ath9k_pdata.eeprom_data[0x202>>1] = sum;
|
|
+
|
|
+ dev_info(&pdev->dev, "checksum fixed.\n");
|
|
+ }
|
|
+
|
|
+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
|
|
+ memcpy_fromio(athxk_eeprom_mac, (void*) ath9k_pdata.eeprom_data, 6);
|
|
+ } else if (mac_res) {
|
|
+ if (resource_size(mac_res) != 6) {
|
|
+ dev_err(&pdev->dev, "mac has an invalid size\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ mac = ioremap(mac_res->start, resource_size(mac_res));
|
|
+ memcpy_fromio(athxk_eeprom_mac, mac, 6);
|
|
+ } else {
|
|
+ dev_warn(&pdev->dev, "using random mac\n");
|
|
+ random_ether_addr(athxk_eeprom_mac);
|
|
+ }
|
|
+
|
|
+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
|
|
+ athxk_eeprom_mac[5] += mac_inc;
|
|
+
|
|
+ ath9k_pdata.macaddr = athxk_eeprom_mac;
|
|
+ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init;
|
|
+
|
|
+ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) {
|
|
+ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data);
|
|
+
|
|
+ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot);
|
|
+ }
|
|
+
|
|
+ dev_info(&pdev->dev, "loaded ath9k eeprom\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct of_device_id ath9k_eeprom_ids[] = {
|
|
+ { .compatible = "ath9k,eeprom" },
|
|
+ { }
|
|
+};
|
|
+
|
|
+static struct platform_driver ath9k_eeprom_driver = {
|
|
+ .driver = {
|
|
+ .name = "ath9k,eeprom",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = of_match_ptr(ath9k_eeprom_ids),
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init of_ath9k_eeprom_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe);
|
|
+}
|
|
+arch_initcall(of_ath9k_eeprom_init);
|
|
+
|
|
+
|
|
+static int ath5k_pci_plat_dev_init(struct pci_dev *dev)
|
|
+{
|
|
+ dev->dev.platform_data = &ath5k_pdata;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+int __init of_ath5k_eeprom_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device_node *np = pdev->dev.of_node;
|
|
+ struct resource *eep_res, *mac_res;
|
|
+ void __iomem *eep, *mac;
|
|
+ int mac_offset;
|
|
+ u32 mac_inc = 0;
|
|
+ int i;
|
|
+
|
|
+ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
+
|
|
+ if (!eep_res) {
|
|
+ dev_err(&pdev->dev, "failed to load eeprom address\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS) {
|
|
+ dev_err(&pdev->dev, "eeprom has an invalid size\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ eep = ioremap(eep_res->start, resource_size(eep_res));
|
|
+ memcpy_fromio(ath5k_eeprom_data, eep, ATH5K_PLAT_EEP_MAX_WORDS);
|
|
+
|
|
+ if (of_find_property(np, "ath,eep-swap", NULL))
|
|
+ for (i = 0; i < (ATH5K_PLAT_EEP_MAX_WORDS >> 1); i++)
|
|
+ ath5k_eeprom_data[i] = swab16(ath5k_eeprom_data[i]);
|
|
+
|
|
+ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) {
|
|
+ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_eeprom_data, 6);
|
|
+ } else if (mac_res) {
|
|
+ if (resource_size(mac_res) != 6) {
|
|
+ dev_err(&pdev->dev, "mac has an invalid size\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ mac = ioremap(mac_res->start, resource_size(mac_res));
|
|
+ memcpy_fromio(athxk_eeprom_mac, mac, 6);
|
|
+ } else {
|
|
+ dev_warn(&pdev->dev, "using random mac\n");
|
|
+ random_ether_addr(athxk_eeprom_mac);
|
|
+ }
|
|
+
|
|
+ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc))
|
|
+ athxk_eeprom_mac[5] += mac_inc;
|
|
+
|
|
+ ath5k_pdata.eeprom_data = ath5k_eeprom_data;
|
|
+ ath5k_pdata.macaddr = athxk_eeprom_mac;
|
|
+ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init;
|
|
+
|
|
+ dev_info(&pdev->dev, "loaded ath5k eeprom\n");
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct of_device_id ath5k_eeprom_ids[] = {
|
|
+ { .compatible = "ath5k,eeprom" },
|
|
+ { }
|
|
+};
|
|
+
|
|
+static struct platform_driver ath5k_eeprom_driver = {
|
|
+ .driver = {
|
|
+ .name = "ath5k,eeprom",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = of_match_ptr(ath5k_eeprom_ids),
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init of_ath5k_eeprom_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe);
|
|
+}
|
|
+device_initcall(of_ath5k_eeprom_init);
|
|
--- /dev/null
|
|
+++ b/arch/mips/lantiq/xway/eth_mac.c
|
|
@@ -0,0 +1,76 @@
|
|
+/*
|
|
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
+ * by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/of_platform.h>
|
|
+#include <linux/if_ether.h>
|
|
+
|
|
+static u8 eth_mac[6];
|
|
+static int eth_mac_set;
|
|
+
|
|
+const u8* ltq_get_eth_mac(void)
|
|
+{
|
|
+ return eth_mac;
|
|
+}
|
|
+
|
|
+static int __init setup_ethaddr(char *str)
|
|
+{
|
|
+ eth_mac_set = mac_pton(str, eth_mac);
|
|
+ return !eth_mac_set;
|
|
+}
|
|
+__setup("ethaddr=", setup_ethaddr);
|
|
+
|
|
+int __init of_eth_mac_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device_node *np = pdev->dev.of_node;
|
|
+ struct resource *mac_res;
|
|
+ void __iomem *mac;
|
|
+ u32 mac_inc = 0;
|
|
+
|
|
+ if (eth_mac_set) {
|
|
+ dev_err(&pdev->dev, "mac was already set by bootloader\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
+
|
|
+ if (!mac_res) {
|
|
+ dev_err(&pdev->dev, "failed to load mac\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ if (resource_size(mac_res) != 6) {
|
|
+ dev_err(&pdev->dev, "mac has an invalid size\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+ mac = ioremap(mac_res->start, resource_size(mac_res));
|
|
+ memcpy_fromio(eth_mac, mac, 6);
|
|
+
|
|
+ if (!of_property_read_u32(np, "mac-increment", &mac_inc))
|
|
+ eth_mac[5] += mac_inc;
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct of_device_id eth_mac_ids[] = {
|
|
+ { .compatible = "lantiq,eth-mac" },
|
|
+ { /* sentinel */ }
|
|
+};
|
|
+
|
|
+static struct platform_driver eth_mac_driver = {
|
|
+ .driver = {
|
|
+ .name = "lantiq,eth-mac",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = of_match_ptr(eth_mac_ids),
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init of_eth_mac_init(void)
|
|
+{
|
|
+ return platform_driver_probe(ð_mac_driver, of_eth_mac_probe);
|
|
+}
|
|
+device_initcall(of_eth_mac_init);
|
|
--- /dev/null
|
|
+++ b/arch/mips/lantiq/xway/pci-ath-fixup.c
|
|
@@ -0,0 +1,109 @@
|
|
+/*
|
|
+ * Atheros AP94 reference board PCI initialization
|
|
+ *
|
|
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
+ * by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/pci.h>
|
|
+#include <linux/init.h>
|
|
+#include <linux/delay.h>
|
|
+#include <lantiq_soc.h>
|
|
+
|
|
+#define LTQ_PCI_MEM_BASE 0x18000000
|
|
+
|
|
+struct ath_fixup {
|
|
+ u16 *cal_data;
|
|
+ unsigned slot;
|
|
+};
|
|
+
|
|
+static int ath_num_fixups;
|
|
+static struct ath_fixup ath_fixups[2];
|
|
+
|
|
+static void ath_pci_fixup(struct pci_dev *dev)
|
|
+{
|
|
+ void __iomem *mem;
|
|
+ u16 *cal_data = NULL;
|
|
+ u16 cmd;
|
|
+ u32 bar0;
|
|
+ u32 val;
|
|
+ unsigned i;
|
|
+
|
|
+ for (i = 0; i < ath_num_fixups; i++) {
|
|
+ if (ath_fixups[i].cal_data == NULL)
|
|
+ continue;
|
|
+
|
|
+ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn))
|
|
+ continue;
|
|
+
|
|
+ cal_data = ath_fixups[i].cal_data;
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (cal_data == NULL)
|
|
+ return;
|
|
+
|
|
+ if (*cal_data != 0xa55a) {
|
|
+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
|
|
+
|
|
+ mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000);
|
|
+ if (!mem) {
|
|
+ pr_err("pci %s: ioremap error\n", pci_name(dev));
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
|
|
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE);
|
|
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
+
|
|
+ /* set pointer to first reg address */
|
|
+ cal_data += 3;
|
|
+ while (*cal_data != 0xffff) {
|
|
+ u32 reg;
|
|
+ reg = *cal_data++;
|
|
+ val = *cal_data++;
|
|
+ val |= (*cal_data++) << 16;
|
|
+
|
|
+ ltq_w32(swab32(val), mem + reg);
|
|
+ udelay(100);
|
|
+ }
|
|
+
|
|
+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
|
|
+ dev->vendor = val & 0xffff;
|
|
+ dev->device = (val >> 16) & 0xffff;
|
|
+
|
|
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
|
|
+ dev->revision = val & 0xff;
|
|
+ dev->class = val >> 8; /* upper 3 bytes */
|
|
+
|
|
+ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n",
|
|
+ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class);
|
|
+
|
|
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
|
|
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
+
|
|
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
|
|
+
|
|
+ iounmap(mem);
|
|
+}
|
|
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup);
|
|
+
|
|
+void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data)
|
|
+{
|
|
+ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups))
|
|
+ return;
|
|
+
|
|
+ ath_fixups[ath_num_fixups].slot = slot;
|
|
+ ath_fixups[ath_num_fixups].cal_data = cal_data;
|
|
+ ath_num_fixups++;
|
|
+}
|
|
--- /dev/null
|
|
+++ b/arch/mips/lantiq/xway/rt_eep.c
|
|
@@ -0,0 +1,60 @@
|
|
+/*
|
|
+ * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
|
+ * by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/init.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/pci.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <linux/rt2x00_platform.h>
|
|
+
|
|
+extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev);
|
|
+static struct rt2x00_platform_data rt2x00_pdata;
|
|
+
|
|
+static int rt2x00_pci_plat_dev_init(struct pci_dev *dev)
|
|
+{
|
|
+ dev->dev.platform_data = &rt2x00_pdata;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+int __init of_ralink_eeprom_probe(struct platform_device *pdev)
|
|
+{
|
|
+ struct device_node *np = pdev->dev.of_node;
|
|
+ const char *eeprom;
|
|
+
|
|
+ if (of_property_read_string(np, "ralink,eeprom", &eeprom)) {
|
|
+ dev_err(&pdev->dev, "failed to load eeprom filename\n");
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
|
|
+// rt2x00_pdata.mac_address = mac;
|
|
+ ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init;
|
|
+
|
|
+ dev_info(&pdev->dev, "using %s as eeprom\n", eeprom);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct of_device_id ralink_eeprom_ids[] = {
|
|
+ { .compatible = "ralink,eeprom" },
|
|
+ { }
|
|
+};
|
|
+
|
|
+static struct platform_driver ralink_eeprom_driver = {
|
|
+ .driver = {
|
|
+ .name = "ralink,eeprom",
|
|
+ .owner = THIS_MODULE,
|
|
+ .of_match_table = of_match_ptr(ralink_eeprom_ids),
|
|
+ },
|
|
+};
|
|
+
|
|
+static int __init of_ralink_eeprom_init(void)
|
|
+{
|
|
+ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe);
|
|
+}
|
|
+device_initcall(of_ralink_eeprom_init);
|
|
--- a/drivers/net/ethernet/lantiq_etop.c
|
|
+++ b/drivers/net/ethernet/lantiq_etop.c
|
|
@@ -826,7 +826,8 @@ ltq_etop_init(struct net_device *dev)
|
|
|
|
ltq_etop_change_mtu(dev, 1500);
|
|
|
|
- memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
|
|
+ if (priv->mac)
|
|
+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
|
|
if (!is_valid_ether_addr(mac.sa_data)) {
|
|
pr_warn("etop: invalid MAC, using random\n");
|
|
random_ether_addr(mac.sa_data);
|
|
@@ -885,8 +886,7 @@ static const struct net_device_ops ltq_e
|
|
.ndo_tx_timeout = ltq_etop_tx_timeout,
|
|
};
|
|
|
|
-static int __devinit
|
|
-ltq_etop_probe(struct platform_device *pdev)
|
|
+static int ltq_etop_probe(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev;
|
|
struct ltq_etop_priv *priv;
|
|
@@ -950,7 +950,9 @@ ltq_etop_probe(struct platform_device *p
|
|
priv->tx_irq = irqres[0].start;
|
|
priv->rx_irq = irqres[1].start;
|
|
priv->mii_mode = of_get_phy_mode(pdev->dev.of_node);
|
|
- priv->mac = of_get_mac_address(pdev->dev.of_node);
|
|
+ priv->mac = ltq_get_eth_mac();
|
|
+ if (!priv->mac)
|
|
+ priv->mac = of_get_mac_address(pdev->dev.of_node);
|
|
|
|
priv->clk_ppe = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(priv->clk_ppe))
|