openwrt-owl/target/linux/lantiq/image/ARV7525PW.dts

143 lines
2.2 KiB
Plaintext

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "ARV7525PW - Speedport W303V Typ A";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 0>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "linux";
reg = <0x20000 0x3d0000>;
};
partition@400000 {
label = "board_config";
reg = <0x3f0000 0x10000>;
read-only;
};
};
mac_addr {
compatible = "lantiq,eth-mac";
reg = <0 0x3f0016 0x6>;
mac-increment = <2>;
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
reg = <0 0x3f0410 0x110>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
};
};
etop@E180000 {
phy-mode = "mii";
};
pci@E105400 {
status = "okay";
interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
req-mask = <0x1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 29 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio 30 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "power";
gpios = <&gpio 3 1>;
};
power1 {
label = "power1";
gpios = <&gpio 4 1>;
};
online {
label = "online";
gpios = <&gpio 5 1>;
};
voice {
label = "voice";
gpios = <&gpio 6 1>;
};
voice2 {
label = "voice2";
gpios = <&gpio 8 1>;
};
wifi {
label = "wifi";
gpios = <&gpio 9 1>;
};
};
};