openwrt-owl/target/linux/generic/patches-4.9/076-v4.11-0001-net-phy-broa...

88 lines
2.6 KiB
Diff

From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 22 Nov 2016 11:40:56 -0800
Subject: [PATCH] net: phy: broadcom: Allow enabling or disabling of EEE
In preparation for adding support for Wirespeed/downshift, we need to
change bcm_phy_eee_enable() to allow enabling or disabling EEE, so make
the function take an extra enable/disable boolean parameter and rename
it to illustrate it sets EEE, not necessarily just enables it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -199,7 +199,7 @@ static int bcm7xxx_28nm_config_init(stru
if (ret)
return ret;
- ret = bcm_phy_enable_eee(phydev);
+ ret = bcm_phy_set_eee(phydev, true);
if (ret)
return ret;
--- a/drivers/net/phy/bcm-cygnus.c
+++ b/drivers/net/phy/bcm-cygnus.c
@@ -104,7 +104,7 @@ static int bcm_cygnus_config_init(struct
return rc;
/* Advertise EEE */
- rc = bcm_phy_enable_eee(phydev);
+ rc = bcm_phy_set_eee(phydev, true);
if (rc)
return rc;
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -195,7 +195,7 @@ int bcm_phy_enable_apd(struct phy_device
}
EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
-int bcm_phy_enable_eee(struct phy_device *phydev)
+int bcm_phy_set_eee(struct phy_device *phydev, bool enable)
{
int val;
@@ -205,7 +205,10 @@ int bcm_phy_enable_eee(struct phy_device
if (val < 0)
return val;
- val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+ if (enable)
+ val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+ else
+ val &= ~(LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X);
phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
MDIO_MMD_AN, (u32)val);
@@ -216,14 +219,17 @@ int bcm_phy_enable_eee(struct phy_device
if (val < 0)
return val;
- val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+ if (enable)
+ val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+ else
+ val &= ~(MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
MDIO_MMD_AN, (u32)val);
return 0;
}
-EXPORT_SYMBOL_GPL(bcm_phy_enable_eee);
+EXPORT_SYMBOL_GPL(bcm_phy_set_eee);
MODULE_DESCRIPTION("Broadcom PHY Library");
MODULE_LICENSE("GPL v2");
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -36,5 +36,5 @@ int bcm_phy_config_intr(struct phy_devic
int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
-int bcm_phy_enable_eee(struct phy_device *phydev);
+int bcm_phy_set_eee(struct phy_device *phydev, bool enable);
#endif /* _LINUX_BCM_PHY_LIB_H */