4a9d726200
ar8216: Fix problem with AR8337 MAC swap handling
...
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.
Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.
The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 45970
2015-06-14 17:43:50 +00:00
baaef42952
ar71xx: Revert "added board support for compex wpj558"
...
This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44245
2015-02-02 10:32:04 +00:00
bc906ca59e
added board support for compex wpj558
...
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 44237
2015-02-02 09:00:21 +00:00
53c0c6054f
ar8216: add 802.3az EEE info to swconfig get_link attribute
...
AR8327/AR8337 allow to read the result of EEE autonegotiation.
If EEE is autonegotiated between the link partners, display
this as part of the swconfig get_link attribute.
eee100: 100MBit EEE supported by both link partners
eee1000: 1GBit EEE supported by both link partners
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
SVN-Revision: 44022
2015-01-18 00:53:59 +00:00
8513629e3e
mac80211: update to wireless-testing 2014-05-19
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40800
2014-05-20 09:35:17 +00:00
0056ac55af
generic: ar8216: add custom LED support for the AR8327 switch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39338
2014-01-20 10:22:56 +00:00
0601b5f404
kernel: define RB_ID_HW_OPTIONS in include/linux/routerboot.h
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39090
2013-12-16 10:11:00 +00:00
7a260c3620
ath9k: merge initval and tx gain table updates, calibration fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39001
2013-12-08 14:48:30 +00:00
7a82667372
kernel: adm6996: add support for ADM6996L and GPIO interface
...
This patch makes it possible to use adm6996.c on first generation
BCM47XX devices with ADM switches.
The GPIO bit banging protocol implementation was copied from the old
switch driver and adapted to this driver and changed to the mainline
kernel GPIO interface.
The ADM6996L is different from the ADM6996M which is supported, for
both specs are available in the Internet.
This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for
the device.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38698
2013-11-09 19:27:27 +00:00
4f679c1775
kernel: drop dead pwm code
...
The files have last been used with 2.6.x kernel.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37810
2013-08-18 01:25:41 +00:00
a2dccb958c
kernel: drop dead glamo code
...
The code is not used since the s3c24xx target was removed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37809
2013-08-18 01:25:40 +00:00
29954b9ffc
kernel: remove gpio_buttons
...
It hasn't been buildable for a long time, and there are no users of it
anymore left as all of them have been switched to the upstream accepted
version.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37436
2013-07-19 13:20:41 +00:00
a1f91282b4
generic: ar8216: allow to specify SGMII config via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36798
2013-05-30 17:38:26 +00:00
c170d3c3e4
generic: ar8216: add get_port_link callback
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36797
2013-05-30 17:38:22 +00:00
a33dd13c98
kernel: add missing bcma defines and header file for bcrmfmac
...
Fixes build failure when having kmod-mmc and brcmfmac selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36468
2013-04-28 11:10:42 +00:00
fff58a5801
allow loading port maps from OF
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36283
2013-04-09 14:19:09 +00:00
bb0118c66f
generic: add b53 swconfig switch driver
...
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.
Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35305
2013-01-23 10:12:33 +00:00
d4b4c7d102
generic: ar8216: add sgmii_delay_en field to ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34881
2012-12-25 18:45:31 +00:00
3931c9524c
generic: ar8316: allow to configure port 6 via platform data on AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34847
2012-12-22 12:12:37 +00:00
a0b31f97bb
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
a860153cce
generic: disintegrate UAPI from include/linux/switch.h
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34677
2012-12-14 12:11:41 +00:00
dfd718d13d
mac80211: ath9k: allow to load EEPROM data via firmware API
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34606
2012-12-10 15:46:15 +00:00
6c1fbb2d5c
mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
...
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
e8fc46b7c5
generic: allow to disable [25]GHz support in ath9k via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33954
2012-10-27 08:55:36 +00:00
0045449b1b
generic: add driver for the the RTL8367R{B,-VB} switches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33839
2012-10-18 07:22:56 +00:00
ba6751058b
gpiodev/gpioctl RIP
...
SVN-Revision: 33725
2012-10-11 11:58:09 +00:00
2323120d5e
generic add WLAN calibration data ID to routerboot.h
...
SVN-Revision: 33346
2012-09-09 14:05:26 +00:00
f3ecbea052
adm5120: move common routerboot definitions into a separate header file
...
Those will be used on the ar71xx platform as well.
SVN-Revision: 33341
2012-09-09 11:55:42 +00:00
e2782eae8e
generic: rtl836x: add hw_reset field to struct rtl8366_smi
...
It will be used to start/stop the switch if that is
supported by the given board.
SVN-Revision: 32943
2012-08-02 09:54:21 +00:00
b934fa2f16
generic: ar8216: allow to configure AR8327 LEDs via platform data
...
SVN-Revision: 32456
2012-06-19 10:44:16 +00:00
9037c2ccc6
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
5f799a0e97
ath9k: make endian check optional
...
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.
SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
faf82f3e10
generic: ar8216: add support for the AR8327 chip
...
SVN-Revision: 31011
2012-03-18 22:06:55 +00:00
b957208807
swconfig: use a mutex instead of a spinlock, many swconfig calls sleep
...
SVN-Revision: 30952
2012-03-15 19:32:31 +00:00
759c341e68
generic: swconfig: add a generic get_port_link implementation
...
SVN-Revision: 30839
2012-03-07 16:32:33 +00:00
799e9cbec8
generic: add disable_[25]ghz to struct rt2x00_platform_data
...
SVN-Revision: 30630
2012-02-18 17:36:13 +00:00
1c4f6b4308
generic: add WPE72 ID to myloader.h
...
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>
SVN-Revision: 29911
2012-01-26 17:01:38 +00:00
8b567fb508
generic: add driver for the RTL8367R/M switches
...
SVN-Revision: 29678
2012-01-07 19:36:31 +00:00
5fa65cba6e
kernel: swconfig: introduce a generic switch LED trigger
...
SVN-Revision: 29627
2011-12-31 15:02:30 +00:00
975355a2b1
kernel: swconfig: add get_port_{link,stats} callbacks
...
SVN-Revision: 29625
2011-12-31 15:02:24 +00:00
e3017bc05e
ath9k: add support for registering extra leds connected to the wmac gpio lines
...
SVN-Revision: 29530
2011-12-14 20:21:36 +00:00
4a441570ca
kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
...
SVN-Revision: 29516
2011-12-13 15:14:59 +00:00
eaa935658b
swconfig: Add generic switch identifiers
...
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
SVN-Revision: 27800
2011-07-27 18:00:18 +00:00
5b32d62fcf
rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB
...
SVN-Revision: 27755
2011-07-24 14:40:31 +00:00
1afe8a0726
rtl8366: unify rtl8366s and rtl8366rb platform data
...
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
129217e127
generic: add rt2x00_platform.h
...
SVN-Revision: 27390
2011-07-03 15:01:57 +00:00
4f1f672d9e
generic: rtl8366s: allow initial register values to be passed via platform_data
...
SVN-Revision: 25120
2011-01-26 20:35:46 +00:00
bd6324190f
swconfig: cleanup of kernel drivers and interface - add some comments to a few data structures - add a switch_dev_ops data structure for attributes and callback to replace the stupid template memcpy - get rid of the switch_dev.priv pointer - using container_of() is better
...
SVN-Revision: 22476
2010-08-04 00:43:40 +00:00
4bb11f9a39
generic: move ath5k_platform.h from ar71xx to generic files
...
SVN-Revision: 22189
2010-07-15 07:36:58 +00:00
da1bb88a2b
rename target/linux/generic-2.6 to generic
...
SVN-Revision: 21952
2010-06-26 20:42:58 +00:00
Felix Fietkau
John Crispin
Gabor Juhos
Hauke Mehrtens
Luka Perkov
Jonas Gorski