37cf77d946
treewide: fix build depends to refer to source package names
...
Build depends must refer to source packages rather than binary package
names.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-01-13 19:54:44 +01:00
3d71786154
build: move STAGING_DIR_HOSTPKG and BUILD_DIR_HOST back to a common directory for all targets
...
Using a single host package staging dir (and build dir) significantly speeds up
builds when multiple targets are built in succession, especially for large host
packages like NodeJS.
$(STAGING_DIR)/host is kept in addition to $(STAGING_DIR_HOSTPKG) in most
places; it is still used as destination for host files in Build/InstallDev.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-18 19:47:36 +01:00
12d0a66942
include/autotools.mk: use STAGING_DIR_HOSTPKG where appropriate
...
Make sure binaries install to STAGING_DIR_HOSTPKG are still found when
this variable is eventually modified.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-01-14 18:57:13 +01:00
336e277e8b
autotools: use correct version for gettext FIXUP
...
0.19.8.1 gettext-full uses "archive-version" of 0.19.8
to replace makros, leading to breakage of PKG_FIXUP:=gettext-version
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-10-13 20:25:42 +02:00
1193dc4e05
include/autotools.mk: fix gettext installation path
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48421
2016-01-20 23:21:09 +00:00
f8cdadc832
Revert "include/autoconf.mk: decouple host fixups from target fixups"
...
This reverts commit r48403
SVN-Revision: 48412
2016-01-20 20:46:20 +00:00
d542d8e3c1
include/autoconf.mk: decouple host fixups from target fixups
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48403
2016-01-20 19:12:28 +00:00
ce9b49046c
include: improve 'gettext-version' fixup
...
* enclose the fixup in brackets
* match anything in the call to AM_GNU_GETTEXT_VERSION
* call it early (before autoreconf if both are specified)
* chain a call to autoreconf since it messes with configure.ac
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44225
2015-01-31 08:15:51 +00:00
7074927533
autotools.mk: add a gettext-version PKG_FIXUP ( #11236 )
...
This fixup aligns the required gettext version in shipped macros to the one
available in $(STAGING_DIR_HOST).
SVN-Revision: 33708
2012-10-10 17:53:51 +00:00
d40fe9d24e
autotools.mk: cope with Debian version strings in libtool
...
SVN-Revision: 32207
2012-06-11 21:50:50 +00:00
a5d34b8613
autotools.mk: fix autoreconf in subdirectories, thanks field_it for spotting this
...
SVN-Revision: 29835
2012-01-20 21:31:03 +00:00
d8d9130e45
autotools.mk: link config.rpath before running autoreconf, also touch ABOUT-NLS - needed by minidlna CVS version
...
SVN-Revision: 28464
2011-10-16 16:44:49 +00:00
e7b094e849
include: autotools.mk: do not fail in patch-libtool fixup if patch is already applied
...
SVN-Revision: 28419
2011-10-11 18:15:12 +00:00
bd982fb72c
autotools.mk: implement PKG_FIXUP:=patch-libtool This change allows to apply OpenWrt, Buildroot and OE libtool fixes to packages which fail badly at autoreconf. The fixup covers the common libtool versions 1.5, 2.2 and 2.4 and automatically determines the correct version to use.
...
SVN-Revision: 27855
2011-08-01 00:22:53 +00:00
a65b43a46f
autotools.mk: disable autoreconf recursion if more than one dir is given in PKG_AUTOMAKE_PATHS
...
SVN-Revision: 26589
2011-04-11 14:18:55 +00:00
073c5e0e74
add config.rpath and link it in autotools.mk if missing, some packages might need it, especially users of lib-link.m4 or iconv.m4
...
SVN-Revision: 25753
2011-02-27 15:39:27 +00:00
4fec7f7edb
autotools.mk: -B is not passed on by autoreconf, use -I instead - fixes PKG_MACRO_PATHS
...
SVN-Revision: 25312
2011-02-02 18:18:38 +00:00
ec45087403
autotools.mk: introduce PKG_MACRO_PATHS and HOST_MACRO_PATHS which default to ./m4, add LIBTOOL to AM_TOOL_PATHS
...
SVN-Revision: 24830
2010-12-26 02:06:50 +00:00
f28b49208b
autotools.mk: like libintl, make all libtool fixup packages depend on the libiconv stub
...
SVN-Revision: 24708
2010-12-19 04:41:18 +00:00
fd181101aa
autotools.mk: add a (dummy) libintl build dependency to any package using the libtool fixup
...
SVN-Revision: 24700
2010-12-19 02:37:56 +00:00
c9f9fc8154
autotools.mk: remove HOST_BUILD_DEPENDS on libtool
...
SVN-Revision: 24676
2010-12-18 18:14:25 +00:00
4e19240b9b
autotools.mk: set AUTOPOINT to "true", not all hosts have it install and it makes autoreconf fail if not present, it also needs cvs which isn't installed on all hosts either
...
SVN-Revision: 24664
2010-12-18 13:19:59 +00:00
a4350e3861
autotools.mk: touch NEWS, AUTHORS, COPYING and ChangeLog, automake wants them
...
SVN-Revision: 24588
2010-12-15 06:05:41 +00:00
249693d50b
autotools.mk: always pass -I m4, some package don't seem to set correct AMFLAGS (or any at all..)
...
SVN-Revision: 24574
2010-12-15 01:24:16 +00:00
6489a9c575
autotools.mk: don't rely on shipped autogen.sh files
...
SVN-Revision: 24573
2010-12-15 01:14:14 +00:00
f3ac8849a5
autotools.mk: explicately pass toolchain versions of automake, autoconf, libtoolize, ... to autoreconf
...
SVN-Revision: 24570
2010-12-15 00:19:08 +00:00
dbf8d9c516
- implement hooks for hostbuilds - use host build hooks to implement fixups for host build - move separator declaration to rules.mk
...
SVN-Revision: 24551
2010-12-13 19:04:33 +00:00
135cfe50c9
autotools.mk: add yet another aclocal path
...
SVN-Revision: 24547
2010-12-13 16:05:53 +00:00
c48a705702
autotools.mk: support autoreconf at different paths, introduce PKG_AUTOMAKE_PATHS which defaults to '.'
...
SVN-Revision: 24534
2010-12-13 01:44:28 +00:00
bf9e9b6a91
rework aclocal handling, packages have issues writing through the symlink so keep the host aclocal as include path for now
...
SVN-Revision: 24474
2010-12-11 03:15:10 +00:00
88a1c20900
autotools.mk: let PKG_REMOVE_FILES default to aclocal.m4
...
SVN-Revision: 24458
2010-12-10 22:59:07 +00:00
3560c34214
autotools.mk: remove autom4ate.cache directory when autoreconf-ing
...
SVN-Revision: 24434
2010-12-10 16:28:20 +00:00
ffbed0f08a
support the autoreconf fixup without libtool
...
SVN-Revision: 24423
2010-12-10 15:20:51 +00:00
6541593b34
autotools.mk: introduce PKG_REMOVE_FILES to delete certain files after applying patches and before doing any fixups
...
SVN-Revision: 24348
2010-12-08 15:55:05 +00:00
fa3c5ac38a
autotools.mk: remove GNUmakefile before running autoreconf (spotted libgcrypt++)
...
SVN-Revision: 24344
2010-12-08 11:55:41 +00:00
48b953fa1c
autotools.mk: allow disabling autoreconf, remove libdir fixup
...
SVN-Revision: 24321
2010-12-08 02:24:21 +00:00
f3f3be3dfe
autotools.mk: allow autogen.sh / autoreconf to fail (for now)
...
SVN-Revision: 24320
2010-12-08 01:19:52 +00:00
69aeb3a06c
autotools.mk: if ./autogen.sh exists, call that. Call autoreconfig only if configure.in or configure.ac exists
...
SVN-Revision: 24319
2010-12-08 01:15:38 +00:00
591190e215
deploy the steamroller tactics and autoreconfigure any package carring the libtool fixup, this should solve a number of issues ranging from linking into the host, syntax errors in libtool and missing make targets
...
SVN-Revision: 24317
2010-12-08 00:54:14 +00:00
c10515db65
re-enable the libtool PKG_BUILD_DEPENDS for PKG_FIXUP and emit a deprecation warning. Packages must specify PKG_BUILD_DEPENDS:=libtool
...
SVN-Revision: 24246
2010-12-04 19:56:47 +00:00
9a18fff28e
ensure accidentally installed *.la-files (into $STAGING_DIR) are going to be removed afterwards - this actually should be done within respective package-Makefiles itself, however they need to stay compatible with libtool v1.5.x which is used in backfire, since it (may) require those files
...
SVN-Revision: 24241
2010-12-04 13:44:43 +00:00
b599f7dc42
disable libtool fixups in trunk globally
...
SVN-Revision: 24234
2010-12-04 00:11:09 +00:00
c4b3e38fc0
fix libtool fixup for libstdc++
...
SVN-Revision: 22732
2010-08-19 17:46:11 +00:00
e10df8d2b5
add a new helper macro to deal with conditional ./configure flags
...
SVN-Revision: 20570
2010-03-29 03:38:40 +00:00
bd2e3ccd6f
autotools.mk: Don't try to fixup .la files in the DevInstall host path, because those .la files shouldn't go there anyway.
...
SVN-Revision: 19785
2010-02-20 23:40:53 +00:00
d38ce9313b
autotools.mk: Add PKG_LIBTOOL_PATHS variable.
...
PKG_LIBTOOL_PATHS can be used to specify to tell libtool_fixup where to look
for libtool scripts of a package. This is useful if a package has it's libtool
script in a non-standard location or has multiple libtool scripts.
The value should be a space seperated list of paths which are relative to
$(PKG_BUILD_DIR). It defautls to $(CONFIGURE_PATH).
SVN-Revision: 19713
2010-02-18 23:50:44 +00:00
93567fed7a
autotools.mk: Add libstdc++ quirk to libtool_fixup_libdir. Fixes build of packages which use libtool and link against packages which link against libstdc++
...
SVN-Revision: 19399
2010-01-30 14:51:22 +00:00
246a5b334d
More libtool madness: Every package which was using c++ and libtool fixup was linked against libstd++ even though if it should have been linked against uclibc++. This is fixed by providing a special version of libtool fixup for packages which should use uclibc++. Not pretty but functional. Packages linking against uclibc++ should use PKG_FIXUP:=libtool-ucxx instead of PKG_FIXUP:=libtool
...
Somebody should probably check all packages using c++ with a dependency on stdlibc++
if uclibc++ can be used instead now.
SVN-Revision: 16317
2009-06-04 00:20:01 +00:00
34939cad39
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
SVN-Revision: 15242
2009-04-17 14:09:46 +00:00
6f774d468f
Change libtool fixup behaviour. Still ugly but it works until we have a real fix. It uses a InstallDev/Post hook to find all .la files which are going to be installed in the staging dir and prefixes every path in those files which starts with /usr/lib with $(STAGING_DIR).
...
SVN-Revision: 12586
2008-09-13 00:29:13 +00:00
Matthias Schiffer
Dirk Neukirchen
Felix Fietkau
Nicolas Thill
Jo-Philipp Wich
Mirko Vogt
Lars-Peter Clausen