Commit Graph

26401 Commits (f440e7faeaefcdc07549fbede92d965e0340933a)

Author SHA1 Message Date
Felix Fietkau f440e7faea kernel: fix parallel build issues with header install
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39424
2014-01-30 07:33:42 +00:00
Jo-Philipp Wich 73344b9c56 Add sysfixtime init script, replacement of luci_fixtime
Simply scan for the most recent file in /etc and set
system time to this file modification time if it's in the future
It allow some time dependent program to work immediatly
without waiting for ntpd to sync

v1: v2: bad approach
v3: simply scan /etc, thanks to Bastian Bittorf for the idea
v4: use sort -n, thanks to Catalin Patulea
v5: use [] instead of [[]], thanks to Andreas Mohr
v6: use openwrt style, thanks to Bastian Bittorf

Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

SVN-Revision: 39422
2014-01-29 13:17:03 +00:00
Jo-Philipp Wich 76e28f6b6e lldpd: build without libreadline
lldpcli uses libreadline for tab completion. libreadline take around 110kb.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39421
2014-01-29 13:10:39 +00:00
Jo-Philipp Wich b2593a3f49 lldpd: add missing lldpcli
lldpd calls on startup lldpcli to configure itself.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39420
2014-01-29 13:10:35 +00:00
Jo-Philipp Wich 3aefca6b07 lldpd: push to version 0.7.7
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39419
2014-01-29 13:10:31 +00:00
Jo-Philipp Wich b5400c775e hostapd: Fix 80211w setup with netifd
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 39412
2014-01-28 21:12:45 +00:00
Jo-Philipp Wich c1cb867c13 hostapd: Fix basic_rate setup with netifd
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 39411
2014-01-28 21:12:36 +00:00
Gabor Juhos a558bb4471 kernel/3.1x: yaffs: fix handling of small-page NAND devices
Since the yaffs code update (r39084), it is not
possible to install OpenWrt on RouterBoards with
small-page NAND chips. Fix the yaffs code to make
it work again.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39409
2014-01-28 17:30:25 +00:00
Zoltan Herpai 6ebfa8c33c add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39406
2014-01-27 19:30:01 +00:00
Zoltan Herpai f617d92b28 mxs: make config and patches versioned
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39405
2014-01-27 19:29:04 +00:00
Florian Fainelli 87f8092629 brcm63xx: fix warning in Redboot code
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39404
2014-01-27 04:34:39 +00:00
Gabor Juhos a709f0fd9a x86: remove 3.6 support
The 3.6 kernel isn't used by any of the x86 subtargets, so remove it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39403
2014-01-26 17:42:26 +00:00
Gabor Juhos 7c137c187f ar71xx: swconfig: use the local helper to set LED brightness on link down
Use the 'swconfig_trig_set_brightness' function to set
the brightness value of the LED when the link goes down.
This ensures that the last brighness value is saved into
a local variable which is used to track the actual LED
status.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39402
2014-01-26 16:46:21 +00:00
Gabor Juhos 3b8c51771d ar71xx: wpe72: set active_low flag for the reset button
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39401
2014-01-26 14:55:34 +00:00
Gabor Juhos b503dc026e ar71xx: wp543: set active_low flag for the buttons
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39400
2014-01-26 14:55:32 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Gabor Juhos e41e531e3b ar71xx: image: reserve 4 erase blocks on the TP-Link devices
This ensures that the generated images will have enough erase
blocks for JFFS2.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39397
2014-01-25 18:12:13 +00:00
Gabor Juhos fe99a2d67d firmware-utils/mktplinkfw: allow to reserve space in the generated images
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39396
2014-01-25 18:12:03 +00:00
Gabor Juhos 50f38063cd ar71xx: archer c7: define LEDs connected to the AR8327 switch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39395
2014-01-25 11:16:59 +00:00
Gabor Juhos f1a9ed8345 ar71xx: image: move WNDAP360 macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39394
2014-01-25 08:31:45 +00:00
Gabor Juhos 715c7533b9 kernel/3.8: update pci_disable_usb_common_quirks patch
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39393
2014-01-25 08:25:05 +00:00
Gabor Juhos f85231257e ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards
On recent TL-WDR4300 boards the external LNAs of the 2.4GHz
interface are connected to GPIO lines. Because these GPIO
lines are disabled by default, the RX sensitivity of the
device is quite bad.

Setup the GPIOs of the external LNAs to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39392
2014-01-24 17:40:17 +00:00
Gabor Juhos 09bf46d418 ar71xx: image: generate sysupgrade images for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39391
2014-01-24 17:15:03 +00:00
Gabor Juhos 252e906dda ar71xx: add sysupgrade support for the Compex boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39390
2014-01-24 17:15:02 +00:00
Gabor Juhos 0c0b87293e ar71xx: image: use a single firmware partition on Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39389
2014-01-24 17:15:01 +00:00
Gabor Juhos 2995030b47 ar71xx: enable MTD_SPLIT_LZMA_FW option
It will be used for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39388
2014-01-24 17:15:01 +00:00
Gabor Juhos 89d60314e7 kernel/3.1x: add split code for LZMA compressed kernel based firmwares
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39387
2014-01-24 17:14:59 +00:00
Luka Perkov 64f3676a25 config: lxc: enable KERNEL_POSIX_MQUEUE
Recent lxc versions are not useful if this option is not enabled. That said,
enable KERNEL_POSIX_MQUEUE by default when KERNEL_LXC_MISC is selected.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39385
2014-01-24 13:49:39 +00:00
Gabor Juhos 998c89a9a6 ar71xx: image: detect partition sizes in the Image/Build/Ath macro
Get the size of the mtd partitions directly from the
MTD layout and remove the superfluous macro parameters.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39384
2014-01-24 11:59:35 +00:00
Gabor Juhos 4556632578 ar71xx: image: fix size verification in the CatFiles macro
The macro checks the size of the rootfs image even if
the second parameter of the macro contains the size of
an eraseblock. It is wrong because the size of the
kernel image will be adjusted to the next eraseblock
and the resulting image might be too large.

Fix the macro to check the size of the final image
instead of the rootfs image.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39383
2014-01-24 11:59:32 +00:00
Gabor Juhos e89476e0a8 Revert "kernel: create firmware partition from MyLoader partition parser"
This reverts r38197.

The automatically created firmware partition includes
the partition_table partition. Apart from the partition
table, this partition contains sensitive data on some
Compex devices which data can be destroyed when the
firmware partition gets modified. Revert the change to
prevent that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39382
2014-01-24 08:48:10 +00:00
Luka Perkov ad48ba11db uboot-envtools: add support for wndr3700
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39380
2014-01-24 00:07:48 +00:00
Gabor Juhos 56136c0f34 ar71xx: ap83: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39379
2014-01-23 16:47:42 +00:00
Gabor Juhos a59e82761f ar71xx: ap81: define mtd layout via command line
Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39378
2014-01-23 16:47:41 +00:00
Gabor Juhos 9f4e2bf326 ar71xx: image: show size limit in warning messages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39376
2014-01-23 12:27:28 +00:00
Gabor Juhos 447530995a ar71xx: add initramfs image support for Compex devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39375
2014-01-23 12:23:10 +00:00
Gabor Juhos b629009eaa ar71xx: wp543: use KEY_RESET code for the sw4 button
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39374
2014-01-23 12:23:08 +00:00
Luka Perkov cbc892a549 ar71xx: create wndr3700 network config from uci-defaults
Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39373
2014-01-23 11:33:42 +00:00
Luka Perkov d66d2ad104 base-files: add ucidef_add_switch_port function
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39372
2014-01-23 11:33:41 +00:00
Steven Barth 3787078b26 odhcpd: fix certain config values being overwritten
Thanks to Hans Dedecker for the fix.

SVN-Revision: 39371
2014-01-23 11:02:18 +00:00
Steven Barth e1c5111997 6rd: Make don't fragment bit (df) a configurable variable
Make the IPv4 "do not fragment" bit a configurable variable for the 6rd
tunnel interface as the bit should not be set in the encapsulating IPv4
header according to RFC3056.
On top the config variable allows to enable/disable path mtu discovery
for tunnel interfaces.
Config variable can be passed to netifd as tunnel config support is
already present for the "do not fragment" bit.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 39370
2014-01-23 10:59:04 +00:00
Gabor Juhos bbe086873a kernel/3.10: update pci_disable_usb_common_quirks patch
Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39369
2014-01-23 09:07:49 +00:00
Gabor Juhos 53512a1961 mpc85xx: Fix building ramdisk images
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39368
2014-01-23 06:55:58 +00:00
Gabor Juhos 30af45d19a mpc85xx: Remove inittab workaround
The default inittab uses "askconsole" which is implemented by procd
and uses the console provided by the kernel command line.

Hence, this platform specific workaround is not necessary anymore.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39367
2014-01-23 06:55:50 +00:00
John Crispin eceea6d6e1 ubox: revert log buffer size changes
the fix horribly broke existing setups

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39366
2014-01-22 15:33:16 +00:00
John Crispin 9dc6030316 ubox: update to latest git head
make sure log buffer size is not bigger than the ubus message size

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39365
2014-01-21 20:59:04 +00:00
Florian Fainelli a747611fe3 brcm63xx: enable support for BCM63268
Support for the BCM63268 is usable, enable it by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39364
2014-01-21 18:50:26 +00:00
Florian Fainelli eaa3e9ec6e brcm63xx: add support for BCM963269BHR board
Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39363
2014-01-21 18:50:11 +00:00
Florian Fainelli fed4b02a68 brcm63xx: improve BCM63268 support
Allow using the HSSPI controller since it works just fine, as well as
the integrated switch core, since that one works too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39362
2014-01-21 18:49:50 +00:00
Gabor Juhos 0b599c51cc ar71xx: mynet-n750: define LEDs connected to the AR8327 switch
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4743/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39361
2014-01-21 17:17:42 +00:00