Commit Graph

26721 Commits (f23a50dff9c276c92a3afe7a2b767b1937e24074)

Author SHA1 Message Date
Luka Perkov a52100469f imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39643
2014-02-20 17:26:08 +00:00
Gabor Juhos 4e0309630b ar71xx: rb91x: fix pll_1000 value for eth0 to avoid packet loss
When the RB91x device uses a GbE link the connection
suffers from packet loss:

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 20 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  20 packets transmitted, 9 packets received, 55% packet loss
  round-trip min/avg/max = 4.570/4.815/4.999 ms

Using a different PLL value fixes the issue.

  root@OpenWrt:/# ping 192.168.1.254 -s 65507 -c 100 -q
  PING 192.168.1.254 (192.168.1.254): 65507 data bytes

  --- 192.168.1.254 ping statistics ---
  100 packets transmitted, 100 packets received, 0% packet loss
  round-trip min/avg/max = 4.449/5.413/13.870 ms

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39642
2014-02-20 17:07:56 +00:00
Gabor Juhos d19b868b12 ar71xx: Add support for MikroTik RB951Ui-2HnD
I noticed that the patch at http://patchwork.openwrt.org/patch/4017/
for adding support for the MikroTik RouterBOARD 951Ui-2HnD had been
abandoned because it wasn't generated and sent to the mailing list
correctly and doesn't apply as a result.  I have cleaned up this patch.

When testing this on real hardware, I also noticed that wireless didn't
work, so this patch fixes that as well.

This patch applies cleanly to SVN 39392.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Patchwork: http://patchwork.openwrt.org/patch/4773/
[juhosg:
  - drop the 'rb951ui_wlan_init' function and rework the code to
    use the recently introduced rb95x_wlan_init function instead,
  - fix GPIO number of the port5 LED,
  - rename LEDs according to the standard LED naming conventions,
    and use 'rb' prefix in the names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39641
2014-02-20 17:07:51 +00:00
Gabor Juhos ab6e3af7fc kernel/3.10: improve fq_codel hashing for 6in4 6to4 801.ad and IPIP cases
This is a backport of code to improve the quality of fq_codel
hashing for 3.10 for some encapsulated protocols.

Not needed in 3.11 and later.

Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4902/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39640
2014-02-20 17:07:44 +00:00
Luka Perkov fcbfe67e2a imx6: drop upstream rejected patch
http://article.gmane.org/gmane.linux.drivers.i2c/17891

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39639
2014-02-20 14:01:28 +00:00
Felix Fietkau b050f87d13 gcc: prevent the use of LDRD/STRD on ARMv5TE
These instructions are for 64-bit load/store. On ARMv5TE, the CPU
requires addresses to be aligned to 64-bit. When misaligned, behavior is
undefined (effectively either loads the same word twice on LDRD, or
corrupts surrounding memory on STRD).

On ARMv6 and newer, unaligned access is safe.

Removing these instructions for ARMv5TE is necessary, because GCC
ignores alignment information in pointers and does unsafe optimizations
that have shown up as bugs in various places.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39638
2014-02-19 19:20:10 +00:00
Gabor Juhos f433088d50 ar71xx: add profile and build image for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4850/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39637
2014-02-19 12:15:35 +00:00
Gabor Juhos 7ec2d80ae3 ar71xx: add user-space support for TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4849/
[juhosg:
  - use the Archer C7 specific LED setup instead of adding
    identical code]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39636
2014-02-19 12:15:34 +00:00
Gabor Juhos db0e6e264d ar71xx: add kernel support for the TP-Link TL-WDR4900 v2.0 board
Patch-by: TenNinjas <tenninjas@tenninjas.ca>
Patchwork: http://patchwork.openwrt.org/patch/4848/
[juhosg:
  - rename and refresh kernel patch,
  - merge the board setup code into mach-archer-c7.c and drop
    mach-tl-wdr49000-v2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39635
2014-02-19 12:15:32 +00:00
Nicolas Thill cd164501b9 sunxi: move a lost CONFIG_CHARGER symbol to generic
SVN-Revision: 39634
2014-02-19 00:17:19 +00:00
Nicolas Thill bb7cbef63c target/sunxi: make REGMAP built-in (used by REGULATOR)
SVN-Revision: 39633
2014-02-18 22:29:56 +00:00
Nicolas Thill 8a04ab5871 target/uml: update README
invoking uml is now simplier, not need to setup console & serial

SVN-Revision: 39632
2014-02-18 22:16:04 +00:00
Nicolas Thill 6c511ed529 toolchain: update build steps doc
SVN-Revision: 39631
2014-02-18 22:15:58 +00:00
Nicolas Thill 41d3230b0c mac80211: disable libertas-sd on uml target
SVN-Revision: 39630
2014-02-18 22:15:52 +00:00
Nicolas Thill ece85d2d25 uboot-envtools: pass target cflags
SVN-Revision: 39629
2014-02-18 22:11:24 +00:00
Steven Barth 97faa098a2 odhcp6c: readd userclass and vendorclass
SVN-Revision: 39628
2014-02-18 18:30:47 +00:00
Gabor Juhos 2288dd072b kernel: refresh configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39627
2014-02-18 17:34:18 +00:00
Gabor Juhos 6b8eb55ddb ar71xx: fix unaligned access hacks for tcp timestamps
This missing bit of the hack saves hugely on instruction traps
on tcp connections to ar71xx based routers.

Patch-by: Dave Taht <dave.taht@bufferbloat.net>
Patchwork: http://patchwork.openwrt.org/patch/4905/
[juhosg: adjust subject, refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39626
2014-02-18 17:34:17 +00:00
Gabor Juhos d6cb5215a9 ar71xx: WNR2200: fix mounting root fs problem
Solves ticket #14356 <https://dev.openwrt.org/ticket/14356>

Without this patch, UART output will show only 4 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000050000 : "u-boot"
  [    0.760000] 0x000000050000-0x000000070000 : "u-boot-env"
  [    0.770000] 0x000000070000-0x0000007f0000 : "firmware"
  [    0.790000] 0x0000007f0000-0x000000800000 : "art"
and then linux complains :VFS: Cannot open root device "(null)"

With this patch, UART out will show 7 partitions:
  [    0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
  [    0.750000] Creating 4 MTD partitions on "spi0.0":
  [    0.750000] 0x000000000000-0x000000040000 : "u-boot"
  [    0.760000] 0x000000040000-0x000000050000 : "u-boot-env"
  [    0.770000] 0x000000050000-0x0000007f0000 : "firmware"
  [    0.780000] 2 netgear-fw partitions found on MTD device firmware
  [    0.780000] 0x000000050000-0x00000014b440 : "kernel"
  [    0.790000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.800000] 0x00000014b440-0x0000007f0000 : "rootfs"
  [    0.810000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  [    0.820000] mtd: device 4 (rootfs) set to be root filesystem
  [    0.830000] 1 squashfs-split partitions found on MTD device rootfs
  [    0.830000] 0x000000340000-0x0000007f0000 : "rootfs_data"
  [    0.840000] 0x0000007f0000-0x000000800000 : "art"

This patch is tested against r39502 of trunk.

Signed-off-by: Jonathan Chang <changcs@santos.ee.ntu.edu.tw>
Patchwork: http://patchwork.openwrt.org/patch/4870/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39625
2014-02-18 17:34:16 +00:00
John Crispin 0da7d381f0 odhcp6c: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39624
2014-02-18 13:34:16 +00:00
John Crispin 159ee2bbd3 relayd: add uci validation
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39623
2014-02-18 13:34:12 +00:00
John Crispin 7d4103ddd4 mac80211: add validation rules
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39622
2014-02-18 13:34:08 +00:00
John Crispin 8fb44e0d1e netifd: add validation support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39621
2014-02-18 13:34:04 +00:00
John Crispin 26e850dafa hostapd: add validation rules to wireless handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39620
2014-02-18 13:33:59 +00:00
John Crispin ee5cb76c66 ppp: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39619
2014-02-18 13:33:56 +00:00
John Crispin ed72f7102c comgt: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39618
2014-02-18 13:33:52 +00:00
John Crispin 15ebcfc04e firewall3: update init.d script to make use of procd
add validation data

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39617
2014-02-18 13:33:47 +00:00
John Crispin f9f8948c6e ubox: logd did not register its config.reload trigger properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39616
2014-02-18 13:33:43 +00:00
John Crispin 7917a87d12 base-files: split /etc/init.d/boot into 2 files
this allows us to bind a procd trigger to system.@system[-1]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39615
2014-02-18 13:33:40 +00:00
John Crispin 204e859542 netifd: update to latest git head
this adds support for proto and wireless handler adding uci validation rules

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39614
2014-02-18 13:33:36 +00:00
John Crispin 97ee2bc616 procd: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39613
2014-02-18 13:33:32 +00:00
John Crispin b71eb4b5df procd: the helper script did not export all functions properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39612
2014-02-18 13:33:29 +00:00
John Crispin b56bef28d7 ralink: add support for na930
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39611
2014-02-18 13:33:25 +00:00
John Crispin 55383946dc ralink: add gpio_uartf mux group
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39610
2014-02-18 13:33:20 +00:00
John Crispin 363512b8c6 ralink: fix the gpio mode mapping
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39609
2014-02-18 13:33:16 +00:00
John Crispin 9bf6569f68 authsae: update to latest version
Signed-off-by: Stefan May <smay@4finger.net>

SVN-Revision: 39608
2014-02-18 13:33:13 +00:00
John Crispin 408306633a openssl: fix up PKG_DEPENDS. there are 2 missing CONFIG_ prefixe
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39607
2014-02-18 13:33:08 +00:00
Felix Fietkau 27d9aa182c uci: update to latest version, adds preparation for validation support and blobmsg int64 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39606
2014-02-18 12:27:11 +00:00
Steven Barth f906a7f565 odhcp6c: send reconfigure-accept again to be compliant
SVN-Revision: 39605
2014-02-17 20:31:21 +00:00
Steven Barth 2f2a73f862 odhcpd: Fix RA interval + add support for prefixes > 64 and < 97
SVN-Revision: 39604
2014-02-17 20:30:29 +00:00
Zoltan Herpai f57f19ed81 3.13: revert r39601 as the symbol is already there
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39602
2014-02-17 11:49:34 +00:00
Zoltan Herpai a3dfcac7ba 3.13: add missing NF_TABLES symbol - until someone packages it
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39601
2014-02-17 10:57:11 +00:00
Zoltan Herpai e82a230930 3.13: add missing symbol
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39600
2014-02-17 10:20:53 +00:00
Luka Perkov 0f2ff3ba97 cmake: upgrade to 2.8.12.2
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39598
2014-02-16 21:51:10 +00:00
Steven Barth 41acaaf893 netifd: work around dangling prefix kernel-routes (fixes #14963)
SVN-Revision: 39597
2014-02-16 11:20:22 +00:00
Luka Perkov 30c39f99a7 kirkwood: dockstar: remove sata from packages
The dockstar doesn't have any sata ports.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39596
2014-02-16 00:14:29 +00:00
Luka Perkov 9ba7cbafe4 kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 39595
2014-02-16 00:14:27 +00:00
Luka Perkov ddcd83e3df uboot-kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39594
2014-02-16 00:14:26 +00:00
Luka Perkov 58fa3f8fdf kirkwood: update support for dockstar
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39593
2014-02-15 23:53:10 +00:00
Luka Perkov 0b0357b50e kirkwood: update support for ib62x0
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:

nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39592
2014-02-15 23:53:09 +00:00