Commit Graph

23757 Commits (f13ae9965cd593f42f18f2e7192a27cdce7441c4)

Author SHA1 Message Date
Gabor Juhos 747b795b56 generic: rtl8367: add compatible string with vendor prefix
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36230
2013-04-06 17:19:31 +00:00
Gabor Juhos f5d8d80ca9 generic: rtl8367b: fix rtl8367b_extif_init_of
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
Gabor Juhos 32d3b456f0 linux/3.8: add more missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36228
2013-04-06 16:56:47 +00:00
Gabor Juhos 38b4865a68 package/kernel: only include i2c-of if CONFIG_OF enabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36227
2013-04-06 16:55:25 +00:00
Gabor Juhos 89539462a8 linux/3.8: add missing symbol
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36226
2013-04-06 16:38:36 +00:00
Gabor Juhos fc0e720f53 kernel: fix md5sum for 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36225
2013-04-06 13:11:44 +00:00
Gabor Juhos bf57f33f02 kernel: Allow talitos crypto hw module selection
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36224
2013-04-06 12:41:06 +00:00
Gabor Juhos 1ef39b43dd ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
Gabor Juhos d57e662cda ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
Gabor Juhos 4becd8590c ramips: rt3883: enable the RTL8367 driver
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
Gabor Juhos 38bd9b4337 generic: rtl8367: allow to load extif config from OF
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
Gabor Juhos 585d19d168 generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
Gabor Juhos 68c931c637 generic: rtl8367: add vendor prefix to the compatible string
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36218
2013-04-06 12:37:32 +00:00
Gabor Juhos 348640f4b3 ramips: rt3883: sync 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
John Crispin d16de0b69f fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
Gabor Juhos f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
Gabor Juhos 202fb45deb refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36214
2013-04-06 11:40:41 +00:00
John Crispin df7af06f1f fix dir-615 h1 network config
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
John Crispin e1a74d8ff7 fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
Florian Fainelli 495296bba9 malta: add le64 and be64 sub targets
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36211
2013-04-05 12:36:48 +00:00
Florian Fainelli 12b925dcbf malta: move 32-bits options to subtarget config
Preliminary change to add support for MIPS64-based malta subtargets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36210
2013-04-05 12:36:45 +00:00
Florian Fainelli 5eb8ba7f19 malta: move endianness kernel configuration to subtarget
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36209
2013-04-05 12:36:41 +00:00
Florian Fainelli f4c09ea554 toolchain/uClibc: backport a MIPS64 fix from openadk
Fixes uClibc dynamic loader name requested by executables when
targetting MIPS64 n64

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36208
2013-04-05 12:36:37 +00:00
Florian Fainelli 463b80c3d1 toolchain/uClibc: handle different MIPS64 ABIs
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36207
2013-04-05 12:36:31 +00:00
Florian Fainelli 2f972664ec toolchain: musl is not available on MIPS64
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36206
2013-04-05 12:36:26 +00:00
Florian Fainelli e032922266 toolchain: allow choosing the MIPS64 user-land ABI
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36205
2013-04-05 12:36:23 +00:00
Florian Fainelli 348cae15d2 buildroot: factor knowledge of a 64bits architecture
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36204
2013-04-05 12:36:19 +00:00
Florian Fainelli 46dfa04a08 malta: enable mips16 feature flag
The malta platform supports mips16 advertise this feature flag.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36203
2013-04-05 12:36:16 +00:00
Florian Fainelli 9e1d2c15d9 buildroot: allow enabling MIPS16 user-space build
Enabling MIPS16 is made conditional on advertising the "mips16" feature
for a specific target since it requires support from the CPU
(HAS_MIPS16) and the actual use of MIPS16 for building packages
(USE_MIPS16).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36202
2013-04-05 12:36:12 +00:00
Florian Fainelli f223d0927e openssl: Pass in any TARGET_ASFLAGS
Packages not picking up the regular TARGET_AS need their openwrt
Makefiles tweaked. For a basic build, that's just openssl.

This depends on patch 1/5.

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36201
2013-04-05 12:36:09 +00:00
Florian Fainelli 9dc38e48f7 toolchain/gcc: .init and .fini need to pick one ISA
The .init and .fini sections are built by concatenating code
fragments. Putting mips16 code in the middle of a mips32 code block
doesn't work. Make gcc built the magic crt stuff in no-mips16 mode.

This is specific to 4.6-linaro but is probably portable to other gcc
flavors. Adding this to the t-libgcc-mips16 makefile fragment is a
hack not suitable for pushing upstream, but there is no mips/t-linux
or mips/t-uclibc and I am not going to touch gcc/configure for two
lines.

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36200
2013-04-05 12:36:06 +00:00
Florian Fainelli 750115a65c toolchain/uClibc: Disable mips16 for uClibc for now
For now, build uclibc without -mips16. There's no mips16 syscall
support AFAIK and uclibc uses inline assembly syscalls a lot.

In addition, touching errno means touching a TLS model symbol, and
that's not supported in gcc 4.6.

The __set_errno macro can be put back to calling
errno_location(). This allows much of the library to be built in
mips16 mode. I don't understand the implications to the thread library
of doing this.

A list of "build as -mno-mips16" C source files can be placed in the
mips architecture-dependent build files. Maintaining the list would be
no fun.

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36199
2013-04-05 12:36:00 +00:00
Florian Fainelli be5d8e6c87 rules.mk: MIPS16 builds get a different toolchain
To be safe, build "m16" into the toolchain and target architecture the
same way mips32r2 does:

target-mips_r2_m16_uClibc-0.9.33.2
toolchain-mips_r2_m16_gcc-4.6-linaro_uClibc-0.9.33.2

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36198
2013-04-05 12:35:56 +00:00
Florian Fainelli 5b3445c60b rules.mk: Create TARGET_ASFLAGS; force -mno-mips16
Create and use a TARGET_ASFLAGS, defaulting to TARGET_CFLAGS.

MIPS .S files reasonably assume they are not in mips16 mode. Because
"-mips16 -mno-mips16" results in -mno-mips16, I can append that to the
TARGET_ASFLAGS. This should be done with $(filter-out)?

Signed-off-by: Jay Carlson <nop@nop.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36197
2013-04-05 12:35:53 +00:00
Steven Barth 35d716fbbb netifd: Bump to latest version * Fix a memory corruption when updating IPv6 prefixes * Fix route sorting order (nbd) * Add support for ip rules (jow) * Implement support for route / route6 table attribute (jow)
SVN-Revision: 36196
2013-04-05 12:28:06 +00:00
Felix Fietkau dda4da0104 ubus: update to latest version, fixes a crash on reconnect
SVN-Revision: 36195
2013-04-04 20:04:52 +00:00
John Crispin 04d80710a9 add a helper that allows loading the eeprom from a MTD partition pointed to by a phandle
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36194
2013-04-04 14:57:43 +00:00
Steven Barth 0393e52623 netifd: Rewrite IPv6 prefix assignment * Add ip6hint option to specify assigned subprefixes * Add preliminary support for RFC 6603 prefix exclusion
SVN-Revision: 36193
2013-04-03 17:08:21 +00:00
John Crispin 1c8d2aec18 unbreak i2c-mv64xxx dependencies
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36192
2013-04-03 12:58:06 +00:00
John Crispin 8baf097b84 fix borken of-i2c dependencies
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36191
2013-04-03 12:51:12 +00:00
Imre Kaloz 84d0582ddb remove the old (and nonworking) hack and identify our patched GCCs properly
SVN-Revision: 36189
2013-04-03 10:41:07 +00:00
John Crispin 9b3b0473ae fix eglibc compile
add librt dependency/link flag to procd when using eglibc thanks to jow for the help

Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

SVN-Revision: 36188
2013-04-03 10:01:10 +00:00
John Crispin d9bb7ff7a5 Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
John Crispin a4c745ee74 add a missing patch that makes board detection work again
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
John Crispin ab31b36b6e revert patch that renames the worker thread as it seems to cause an oops
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36185
2013-04-03 10:00:59 +00:00
John Crispin 30ee3ef24e add cdc-mbim module
http://patchwork.openwrt.org/patch/3370/

Signed-off-by: Rusink Rusinkoff <rzrusink@gmail.com>

SVN-Revision: 36184
2013-04-03 10:00:55 +00:00
John Crispin c838ec2391 Patch for invoking (pre)init
http://patchwork.openwrt.org/patch/3485/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36183
2013-04-03 10:00:50 +00:00
John Crispin 219313833a Add INA2XX current sensor module.
This is a I2C current/voltage/power sensor.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36182
2013-04-03 10:00:44 +00:00
John Crispin 7852c48ffd add lm92 kernel module
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36181
2013-04-03 10:00:40 +00:00
John Crispin 62b5098b35 add pcf857x kernel module
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36180
2013-04-03 10:00:36 +00:00