Commit Graph

1491 Commits (ef7bc819611ecfba69d9c42e38adf499cd857815)

Author SHA1 Message Date
John Crispin 8965a29bb0 button-hotplug: sync list of supported keys with gpio-button-hotplug
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38676
2013-11-07 12:46:20 +00:00
Hauke Mehrtens a02ef5d05e kernel: fix dependencies of kmod-thermal
This depends on kmod-hwmon-core

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38639
2013-11-03 20:18:45 +00:00
Hauke Mehrtens 1f3c0f9c54 kernel: fix dependencies of usb-eth-gadget
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38638
2013-11-03 20:17:52 +00:00
Hauke Mehrtens b81685f0a4 kernel: add missing dependency for kernel 3.12 in tg3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38605
2013-10-30 09:50:13 +00:00
Luka Perkov f7ccdbec75 kernel: add w1-master-mxc module
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38575
2013-10-29 02:52:17 +00:00
John Crispin 14457da13f gpio-button-hotplug: add support for power buttons
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38557
2013-10-28 13:45:57 +00:00
John Crispin c81c814d6a kernel: add packages for sdhci support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38549
2013-10-28 06:47:20 +00:00
Luka Perkov 3d77352390 kernel: add keyboard-imx module
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38537
2013-10-25 10:29:49 +00:00
Florian Fainelli ec41ca3a47 kernel: make kmod-pcnet32 depend on kmod-mii
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 38531
2013-10-25 01:47:45 +00:00
Florian Fainelli 294a57822e kernel: add mii library kernel module package
This package is required for network drivers such as pcnet32

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 38530
2013-10-25 01:47:32 +00:00
Felix Fietkau 537e301fab ath9k: gather entropy from raw ADC I/Q samples (use the least significant bit only)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38486
2013-10-20 17:51:17 +00:00
Felix Fietkau bc3d7c2f1b rt2800usb: merge a fix to slow down tx status polling (#13523)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38452
2013-10-18 13:39:10 +00:00
Luka Perkov d8311375eb kernel: imx6: add modules needed for sgtl5000 audio codec
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38427
2013-10-16 03:25:59 +00:00
Felix Fietkau e90e74000a rt2x00: fix rf id for rt3352 (#14322)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38399
2013-10-14 19:40:30 +00:00
Felix Fietkau f1ea6d3c2d ath9k: add some more pending fixes / optimizations
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38398
2013-10-14 19:38:42 +00:00
Felix Fietkau d21810a298 ath5k: fix tx status processing errors (causing packet loss and throughput issues)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38396
2013-10-14 19:20:05 +00:00
Felix Fietkau b907e95125 ath9k: reduce rx buffer allocation size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38395
2013-10-14 19:20:02 +00:00
Hauke Mehrtens e1523b5504 switch: remove old switch driver
The switch driver is not used by brcm47xx any more and can be removed,
instead of this switch driver b53 is used now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38387
2013-10-13 22:15:31 +00:00
Hauke Mehrtens 59b362a204 mac80211: b43: fix prefix for config options
Config options in backports are starting with CPTCFG and not with CONFIG_.
CONFIG_B43_BCMA was never true.

This closes #13883.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38385
2013-10-13 20:25:12 +00:00
Hauke Mehrtens c240ee84e9 zd1201: fix url to zd1201 firmware
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38378
2013-10-12 22:36:08 +00:00
Hauke Mehrtens af32e63bae lantiq: add some missing PKG_SOURCE_URLs
These URLs where missing and causes build failures.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38376
2013-10-12 22:33:55 +00:00
Luka Perkov 408af1f6c7 kernel: add kirkwood thermal module
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38371
2013-10-12 16:26:55 +00:00
Jonas Gorski 06f3f01b06 acx-mac80211: update to latest version
Fixes compilation for linux 3.10.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38367
2013-10-12 10:50:35 +00:00
Jonas Gorski 8a240be62b ar7-atm: fix compilation for linux 3.10
Update proc code to new proc_create to allow compilation with
linux 3.10+.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 38366
2013-10-12 10:50:19 +00:00
Felix Fietkau a3cc10cba7 ath9k: fix rx issues introduced in my last commit (fixes #14307)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38362
2013-10-10 21:10:45 +00:00
Felix Fietkau d45a1618eb ath9k: add some cleanups and minor fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38354
2013-10-10 14:31:22 +00:00
Hauke Mehrtens b814661167 mac80211: rtlwifi: Align private space in rtl_priv struct
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38346
2013-10-09 09:13:41 +00:00
John Crispin 925f37a5a6 kernel: dont rely on library modules to be depended on
fixes https://dev.openwrt.org/ticket/14257

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38341
2013-10-08 15:08:33 +00:00
Hauke Mehrtens c8e742a080 mac80211: wl12xx: build them again
WL_TI is bool but was set to =m, which deactivated it. Now it is set to
=y and should be activated in the config so the wl12xx driver gets
build.

This closes #14212.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38333
2013-10-07 22:16:17 +00:00
Hauke Mehrtens 16675de754 mac80211: brcmfmac: BRCMFMAC_USB was not set in config
Somehow BRCMFMAC_USB was not set in the build and brcmfmac.ko did not had usb support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38332
2013-10-07 21:49:28 +00:00
John Crispin c1316c09a1 lantiq: fix ltq_ptm compile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38329
2013-10-07 20:13:32 +00:00
Felix Fietkau 048fc8f0c1 ath9k: fix tx queueing issues after background scans
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38304
2013-10-05 12:12:21 +00:00
Hauke Mehrtens caff3b5aee broadcom-diag: fix 'autoload' number of diag.ko
Change the autoload number from '5' to '05' so the module loads earlier (as intended).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38293
2013-10-02 23:14:08 +00:00
Hauke Mehrtens 302d27f268 c80211: add iwldvm to iwlwifi, this is needed to support the old wifi card.
This closes #14258

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38277
2013-10-01 22:41:46 +00:00
Hauke Mehrtens c57ac5fcb7 kernel: add industrialio-triggered-buffer.ko only when the config option is selected.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38276
2013-10-01 22:40:32 +00:00
Hauke Mehrtens 1158f22b02 ep93xx: fix sound dependencies for ep93xx
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38274
2013-10-01 22:38:40 +00:00
John Crispin 391ec155a0 kernel: lib-textsearch needs to be auto probed for amanda nat to work
https://dev.openwrt.org/ticket/14232

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38262
2013-09-30 20:48:12 +00:00
Felix Fietkau 17be4e9d14 mac80211: add AP inactivity handling / probing fixes to improve stability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38257
2013-09-29 19:42:00 +00:00
Felix Fietkau f07713f7cf mac80211: really fix the long standing wds ap tx power regression (#14153)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38255
2013-09-29 12:53:21 +00:00
Felix Fietkau 2beabf6c11 ath9k: fix an AP mode powersave issue with aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38249
2013-09-29 11:07:58 +00:00
Felix Fietkau 32d54de3b9 kernel: disable kmod-iio for linux 3.6 as well (to avoid build issues due to missing config symbol changes)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38247
2013-09-28 05:22:05 +00:00
Felix Fietkau e2420239ae kernel: exclude regmap-spi.ko if SPI support cannot be selected
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38245
2013-09-27 21:12:15 +00:00
Felix Fietkau 1f037b5248 kernel: make sound-soc-core depend on kmod-ac97
it has a conditional #ifdef based dependency on it, which trips up on
some targets

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38242
2013-09-27 21:12:04 +00:00
Felix Fietkau 3c045e9933 kernel: remove old kernel compat code for pcmcia
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38239
2013-09-27 20:47:09 +00:00
Felix Fietkau e232a92c08 kernel: mark kmod-thermal menuconfig symbol as hidden to avoid building it on targets with no thermal drivers
Should fix build errors with Linux 3.3/3.6 targets, which use different
kconfig symbols

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38238
2013-09-27 20:44:11 +00:00
Luka Perkov eb486aadb8 kernel: add thermal modules
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38230
2013-09-27 10:49:33 +00:00
Gabor Juhos 7530971113 package/kernel: add support for industrial-io and AD799x
Add support for industrial IO core and (still staging)
driver for AD799x, a high precision I2C ADC family.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38187
2013-09-25 18:00:35 +00:00
Gabor Juhos 4fcc9ce9ff package/kernel: add hwmon driver for ADT7410
Add support for the ADT7410 hwmon driver, a high precision
I2C temperature sensor.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38186
2013-09-25 18:00:34 +00:00
Gabor Juhos 6ac0dfb280 package/kernel: move I2C-GPIO drivers from i2c.mk to other.mk
Move pca953x support from i2c.mk to other.mk, where other
GPIO drivers are located. Remove duplicate pcf857x support
from i2c.mk.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
[juhosg: update subject, and reformat commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38185
2013-09-25 18:00:33 +00:00
Felix Fietkau 9d24525b1d kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38055
2013-09-19 06:33:53 +00:00
John Crispin 5799adc238 lantiq: fix bug in hcd gpio detetcion code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38043
2013-09-18 16:31:49 +00:00
Hauke Mehrtens 4c52ed50d7 brcm47xx: update board detection patches
This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38036
2013-09-18 14:33:54 +00:00
Felix Fietkau 50bc1a7593 ath9k: add missing tx locking
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38034
2013-09-18 13:24:55 +00:00
John Crispin 1878a3d6ab lantiq: add v3.10 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38031
2013-09-17 21:46:10 +00:00
John Crispin 2b0cb17d42 lantiq: update packages for v3.10
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38028
2013-09-17 21:45:56 +00:00
John Crispin f12f4074af kernel: make most modules use AutoProbe
now that we have modprobe we can set more than half of the modules to AutoProbe

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38021
2013-09-17 21:45:17 +00:00
Felix Fietkau b3ceaf834d ath9k: merge a fix for PS-Poll responses + aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38017
2013-09-17 10:07:56 +00:00
Felix Fietkau 5d8cdd84e8 kernel: fix config symbol for kmod-crypto-hash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38015
2013-09-17 09:54:05 +00:00
Felix Fietkau fd44388bbf mac80211: drop spoofed packets in ad-hoc mode (fixes #12427)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38013
2013-09-17 09:17:40 +00:00
Hauke Mehrtens bf8cf89fc9 broadcom-diag: add GPIO configuration for Linksys E2000 V1
Thank you Javier Achirica for the patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38008
2013-09-16 19:52:23 +00:00
Hauke Mehrtens 2b4e96fe09 broadcom-diag: Add WRT310N v1 gpio leds and buttons
Signed-off-by: Flavio Silveira <fggs@terra.com.br>

SVN-Revision: 38007
2013-09-16 19:50:14 +00:00
Hauke Mehrtens 86405f2c4c brcm47xx: add detection code for Huawei E970
This is based on a patch by Mathias Adam.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38001
2013-09-15 17:00:45 +00:00
Felix Fietkau 7a704be4bb ath9k: add another minor tx path fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37985
2013-09-14 15:30:13 +00:00
Felix Fietkau 6eeb0261e6 ath9k: merge a fix for tx processing issues with aggregation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37982
2013-09-14 14:46:39 +00:00
Hauke Mehrtens 0c597a8f53 kernel: add missing config option
SVN-Revision: 37978
2013-09-13 20:39:23 +00:00
Hauke Mehrtens b73b915c54 brcm47xx: board detection, GPIO for Linksys E1000 V2.1
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.

This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.

Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37977
2013-09-13 19:24:08 +00:00
Hauke Mehrtens 6c14f5f3a6 brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37970
2013-09-13 16:00:52 +00:00
Luka Perkov 15ea1a6d66 kernel: gsc depends on kmod-i2c-core
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37960
2013-09-12 23:38:54 +00:00
Luka Perkov e4c837f6d6 kernel: fix imx sata module
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37950
2013-09-11 22:08:46 +00:00
Luka Perkov a43c2d4e6f kernel: add imx sata module
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37937
2013-09-10 22:26:37 +00:00
Luka Perkov 7d73153e86 kernel: allow hwmon GSC driver for all targets
- enable using hwmon GSC driver on all targets
- add a kmod package for it

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 37933
2013-09-10 22:26:30 +00:00
Felix Fietkau 247299bfa0 rt2x00: merge an rt2800 initialization order fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37922
2013-09-09 17:31:53 +00:00
Felix Fietkau 768e6750d7 ath9k: clean up some patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37919
2013-09-08 09:38:38 +00:00
Felix Fietkau 249c396583 mac80211: merge a big batch of upstream changes/improvements
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37918
2013-09-08 09:38:32 +00:00
Hauke Mehrtens bdc04e379f mac80211: kmod-rtl_pci: fix dependencies
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37905
2013-09-05 20:17:28 +00:00
Hauke Mehrtens f9b790bd55 kernel: kmod-libphy, kmod-tg3: fix load order
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37904
2013-09-05 19:57:44 +00:00
Hauke Mehrtens 9af52f3a2c kernel: kmod-ssb, kmod-b44: fix load order
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37903
2013-09-05 19:56:04 +00:00
Hauke Mehrtens fd561a47c5 kernel: kmod-firewire: fix dependencies
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37902
2013-09-05 19:53:21 +00:00
Hauke Mehrtens 11ae55cc95 mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
linux-firemware contains the same version we loaded without this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37901
2013-09-05 19:43:38 +00:00
Hauke Mehrtens 14a65f1cfb kernel: kmod-fs-xfs: fix dependencies
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37900
2013-09-05 19:41:00 +00:00
Hauke Mehrtens 09a55136d7 kernel: kmod-usb-serial-keyspan: fix dependencies
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37899
2013-09-05 19:39:55 +00:00
Hauke Mehrtens 82a2969100 ath10k: enable Atheros 802.11ac driver
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.

This goes build tested, not run time tested.

[Hauke: I did some minor changes]

Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37898
2013-09-05 19:35:14 +00:00
Gabor Juhos b85c090177 package/rotary-gpio-custom: fix checkpatch errors module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37875
2013-09-02 08:45:32 +00:00
Gabor Juhos 1928106d0d package/w1-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37874
2013-09-02 08:45:31 +00:00
Gabor Juhos f18a0d9547 package/i2c-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37873
2013-09-02 08:45:30 +00:00
Gabor Juhos 6bb50e4df1 package/kernel: add spi-gpio-custom module
The package makes it possible to create custom SPI
buses via GPIO lines.

This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.

Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
  - change subject,
  - extend and reformat commit message,
  - cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37872
2013-09-02 08:45:29 +00:00
Steven Barth 0a85c59040 netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration
SVN-Revision: 37866
2013-09-01 17:59:48 +00:00
Gabor Juhos 6c29525f42 mac80211: add a bunch of rt2x00 specific changes
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.

Also refresh the rt2x00 specific patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37843
2013-08-27 10:44:06 +00:00
Felix Fietkau eaa8cb7834 mac80211: merge a few ad-hoc mode fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37840
2013-08-26 17:31:23 +00:00
Felix Fietkau 9cf157ac75 mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37839
2013-08-26 17:31:15 +00:00
Luka Perkov b04baf0d0c crypto: add missing depends for crypto-manager
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37817
2013-08-21 00:36:19 +00:00
Hauke Mehrtens 2fc0c28345 broadcom-diag: remove BUFFALO_UNKNOWN
This was itriggered by to many non buffalo devices

This closes #14043.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37804
2013-08-17 13:43:07 +00:00
Hauke Mehrtens e12b5ec8df broadcom-wl: Add 'N' mode support to broadcom-wl
This is partly based on patches sent by Łukasz Kwestarz (See https://lists.openwrt.org/pipermail/openwrt-devel/2012-March/014356.html).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37802
2013-08-17 13:38:30 +00:00
Felix Fietkau d03d3aa58c mac80211: merge upstream change to fix mesh rssi thresholds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37793
2013-08-15 13:57:11 +00:00
Felix Fietkau bbf4412bee ath9k: merge a few more cleanups/fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37767
2013-08-13 10:35:18 +00:00
Felix Fietkau 253d2b511b ath9k: reorganize patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37766
2013-08-13 10:35:14 +00:00
Felix Fietkau ead5aa354c mac80211: merge upstream patch to suppress unnecessary ad-hoc mode scan with fixed-freq, fixed-bssid
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37764
2013-08-13 10:35:04 +00:00
Luka Perkov acb9bc0f5e kernel: remove imx-sdma-fw because of license issues
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37755
2013-08-12 10:48:05 +00:00
Luka Perkov 556e850dfd kernel: add imx-sdma-fw package
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37753
2013-08-11 15:10:42 +00:00
Felix Fietkau fd586c0275 ath9k: fix an rx descriptor processing race condition
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37746
2013-08-10 14:00:33 +00:00
Felix Fietkau 39ab281fae mac80211: Handle concurrent AP/STA beaconing properly
Use the "start_disabled" option in hostapd that was added
in the earlier patch.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>

SVN-Revision: 37732
2013-08-06 17:59:09 +00:00
Felix Fietkau bdb2859a48 ath9k: fold the aggregation rework into 300-pending_work.patch (tracked as upstream submission)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37716
2013-08-06 10:31:10 +00:00
Felix Fietkau 5bce86faa2 mac80211: refresh a patch that was using the wrong patch style
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37715
2013-08-06 10:31:06 +00:00
Felix Fietkau 48b3b74da7 mac80211: fold the rtlwifi patch into 300-pending_work.patch (upstream patch)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37714
2013-08-06 10:31:02 +00:00
Felix Fietkau 592f2c6e2b ath9k: add some more fixes for the tx queueing rework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37713
2013-08-06 10:30:58 +00:00
Hauke Mehrtens 3f351e2770 mac80211: rtlwifi depends on PCI or USB support in the Kconfig file
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37711
2013-08-05 21:57:48 +00:00
Hauke Mehrtens 9d4145efe5 kernel: fix DMA error when BCM4331 is connected to BCM4706
The BCM4331 supports a PCIe max request size of 512 bytes and uses
that, but the PCIe controller in the BCM4706 just supports 128 Bytes
and that causes a DMA error for packages bigger than 126 bytes. This
fixes the problem by setting the BCM4331 also to 128 Bytes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37709
2013-08-05 16:17:05 +00:00
Felix Fietkau 6743f2625b gpio-button-hotplug: debounce the initial button state, the first reads at boot time might be wrong
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37702
2013-08-05 10:32:13 +00:00
Gabor Juhos 259c36358f mac80211: fix rt2x00 dependency
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37699
2013-08-05 09:24:19 +00:00
Gabor Juhos 885cf1f19f mac80211: rt2x00: fix LED polarity patch
The patch causes compiler warning ...

  <...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
  <...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]

... and runtime errors on PCI/USB devices:

  [   11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
  [   11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
  [   11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
  [   12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
  [   12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
  [   12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
  [   12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
  [   12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
  [   12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37698
2013-08-05 09:09:41 +00:00
Gabor Juhos 3573494b19 mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
Closes #13951.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37697
2013-08-05 09:09:40 +00:00
Jonas Gorski c7976ae5f8 mac80211: add rtlwifi drivers
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
		   usb dependencies, backport upstream fixes for Kconfig
		   issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37687
2013-08-04 15:32:36 +00:00
Hauke Mehrtens 2fcaba306e brcm47xx: change board detection for some Asus devices
This closes #13316

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37680
2013-08-04 12:36:13 +00:00
Hauke Mehrtens 0d9ecfa564 kernel: kmod-appletalk: fix dependencies
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.

This fixes the missing dependency of kmod-appletalk on psnap.ko

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37673
2013-08-04 09:51:07 +00:00
Hauke Mehrtens 7dea39fda2 broadcom-diag: show error message in case something goes wrong with gpio irq
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37668
2013-08-03 17:12:07 +00:00
Hauke Mehrtens 309123bbfd broadcom-diag: add gpio config for Asus RT-N66U
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37667
2013-08-03 17:10:37 +00:00
Hauke Mehrtens b1b3067a12 broadcom-diag: add gpio config for Linksys E4200v1
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37666
2013-08-03 17:09:39 +00:00
Felix Fietkau 18e37d8caf gpio-button-hotplug: cleanup, fix compiler warning
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37665
2013-08-03 11:56:27 +00:00
Felix Fietkau 4281026dda gpio-button-hotplug: fix active_low handling, possibly broken in r37643
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37664
2013-08-03 11:49:50 +00:00
Hauke Mehrtens d2ed54596d kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is set
SVN-Revision: 37661
2013-08-03 10:10:16 +00:00
Hauke Mehrtens f43b6b2bea kernel: add missing module to video-core for kernel < 3.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37659
2013-08-02 20:08:20 +00:00
Hauke Mehrtens 65ef965e6e kernel: fix usb-chipidea compilation with kernel <= 3.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37658
2013-08-02 20:07:11 +00:00
Hauke Mehrtens 58274d68fb broadcom-diag: add support for the ASUS RT-N12
This adds button and led info, which I determined
by manually poking the gpio values.

Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37655
2013-08-02 15:44:04 +00:00
Hauke Mehrtens af970e66bf broadcom-diag: increase version number
There are some changes in there and this should be rebuild.

SVN-Revision: 37654
2013-08-02 15:06:14 +00:00
Felix Fietkau 1972a131a0 mac80211: backport a few upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37653
2013-08-02 10:02:35 +00:00
Hauke Mehrtens 0fe808d032 kernel: load libphy before tg3
SVN-Revision: 37651
2013-08-01 22:19:19 +00:00
Hauke Mehrtens 2b55968f5d brcm47xx: improve detection of Linksys WRTSL54GS
This closes #13319

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37647
2013-08-01 19:33:59 +00:00
John Crispin 1eabf431df gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions.  At leat 1 button is in pressed state
in any of those positions.  Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 37643
2013-08-01 14:31:28 +00:00
John Crispin ef96422920 gpio-button-hotplug: use gpio_button_get_value() to fetch state.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 37642
2013-08-01 14:31:24 +00:00
John Crispin 2c19af6ac5 gpio-button-hotplug: add inline function gpio_button_get_value().
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 37641
2013-08-01 14:31:20 +00:00
Hauke Mehrtens e77339b9e2 broadcom-wl: fix compile error with kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37626
2013-07-31 17:42:55 +00:00
Felix Fietkau 5bd3f8b164 mac80211: rt2x00: add missing of.h header
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37618
2013-07-29 22:45:57 +00:00
Felix Fietkau 36e6d4ca53 ath9k: fix several issues in the tx queueing rework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37616
2013-07-29 19:44:05 +00:00
John Crispin 2b906791be mac80211: rt2x00: fix default register settings for rt5350
Comparing the RTSDK driver and mac80211 revealed, that this register needs
to have a special setup on rt5350.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37608
2013-07-29 13:10:12 +00:00
John Crispin 7f895c6776 mac80211: rt2x00: enable setting wifi led polarity from OF
This patch enables setting the wifi led polarity from OF.
It can be used in a DTS' wmac section like this:

   ralink,led-polarity = <1>;

Valid values are 0 or 1.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37607
2013-07-29 13:09:16 +00:00
Felix Fietkau 1ff304e5f5 rt2x00: merge fix for queue stopping
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37603
2013-07-29 12:49:01 +00:00
Felix Fietkau c67a12711d mac80211: add support for verbose builds using V=sc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37597
2013-07-29 09:38:08 +00:00
Luka Perkov 181cb9f3fa kernel: add usb-mxs-phy package
SVN-Revision: 37580
2013-07-28 20:34:18 +00:00
Luka Perkov cc4bda8d67 kernel: update usb-chipidea package
SVN-Revision: 37579
2013-07-28 20:34:17 +00:00
Luka Perkov 769f986d9a kernel: update usb2 package
SVN-Revision: 37578
2013-07-28 20:34:09 +00:00
John Crispin 4176b6fdd3 strict_strtoul is obsolete, use kstrtoul instead
based on http://patchwork.openwrt.org/patch/3827/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37562
2013-07-27 09:23:18 +00:00
Felix Fietkau 4478c69b86 authsae: adapt uci scripts to use authsae
This patch modifies the uci scripts to be able to
start meshd-nl80211 for encrypted mesh networks,
therefor a new script (authsae.sh) is inserted.

Signed-off-by: Emanuel Taube <emanuel.taube@gmail.com>
[etienne.champetier@free.fr: just update mac80211.sh path]
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

SVN-Revision: 37554
2013-07-26 10:02:59 +00:00
Luka Perkov aa81b9ed5f kernel: be consistent with formatting style
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37545
2013-07-26 01:09:50 +00:00
John Crispin 3251cddf31 mac8021: add ath9k pcie id for AR9381
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37536
2013-07-25 20:28:45 +00:00
Jonas Gorski b037b0011e kernel: ebtables depends on bridge
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37520
2013-07-23 19:53:08 +00:00
John Crispin 06a27059bd lantiq: dont build ar10 drivers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37500
2013-07-22 13:53:01 +00:00
Felix Fietkau 94439c2b5d kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37491
2013-07-21 11:55:30 +00:00
Jonas Gorski 11c5730695 kernel: fix config breakage from removing the de4x5 tulip driver
Properly define the config symbol to n so it doesn't break build for
targets which do have it available (e.g. mostly everything except arm).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37489
2013-07-21 11:08:38 +00:00
Felix Fietkau c493e45058 kernel: fix kmod-crypto-hw-ppc4xx dependencies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37488
2013-07-21 08:20:01 +00:00
Felix Fietkau 2ea287816c kernel: add missing config symbol for the chipidea usb driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37487
2013-07-21 08:19:58 +00:00