d8c79faf41
switch to the IXP4xx microcode with crypto support
...
SVN-Revision: 11779
2008-07-12 02:06:55 +00:00
fc80a07184
generate package for the new IXP4xx crpyto driver
...
SVN-Revision: 11777
2008-07-12 02:00:55 +00:00
a4d444f859
create crypto packages for aead and authenc
...
SVN-Revision: 11774
2008-07-12 01:57:22 +00:00
6ce90189ad
Fix hostapd compilation which was broken only for 2.6.25 ( #3733 ). Thanks to Hauke Mehrtens.
...
SVN-Revision: 11763
2008-07-10 14:23:06 +00:00
1c70591c3d
sit depends on tunnel4
...
SVN-Revision: 11755
2008-07-09 21:51:36 +00:00
2746844d62
revert r11749: b43 should not depend on crypto modules, mac80211 should
...
SVN-Revision: 11754
2008-07-09 19:05:47 +00:00
6381e4e679
Make b43 module depend on crypto modules
...
SVN-Revision: 11749
2008-07-08 17:48:29 +00:00
efd3eac055
Update libpcap to 0.9.8 ( #3571 )
...
SVN-Revision: 11742
2008-07-07 14:41:48 +00:00
c4f83e0b0c
Add support for WRT600N and WRT600N v1.1 ( #3535 )
...
SVN-Revision: 11740
2008-07-07 14:17:02 +00:00
216556954e
Update hostapd to 0.6.3 ( #3615 )
...
SVN-Revision: 11738
2008-07-07 13:49:36 +00:00
0b0061e01b
Update iw to snapshot 4d3a72da3f21761bf4f2866a6a3400d4ecf67365
...
SVN-Revision: 11734
2008-07-06 18:23:29 +00:00
9e6c38917c
make atheros wifi cards used on arcaydian 4519 ifxmips based boards work
...
SVN-Revision: 11676
2008-07-06 00:59:48 +00:00
9be32c744b
be a bit more verbose about madwifi errors
...
SVN-Revision: 11675
2008-07-06 00:41:46 +00:00
ed3aeb2031
This adds dhcp-boot support to dnsmasq-init: option name "virt0" option filename "pxelinux.0" option servername "mainframe0.dev" option serveraddress "9.3.2.1"
...
closes #3529
SVN-Revision: 11663
2008-07-05 13:43:55 +00:00
c9e08e9105
madwifi: fix sequence number check on incoming retransmit checks
...
SVN-Revision: 11614
2008-07-01 21:38:40 +00:00
76215afdec
lua: Fixed some cross-platform issues for PPC (and probably other architectures)
...
SVN-Revision: 11608
2008-06-29 11:38:22 +00:00
7174ef488e
backport a fix to suppress warning when loading dnsmasq on >=2.6.25.7. this patch can be removed when dnsmasq 2.43 is released
...
SVN-Revision: 11604
2008-06-28 21:42:54 +00:00
783bb0e81c
move ifxmips uboot to package/
...
SVN-Revision: 11601
2008-06-28 19:53:41 +00:00
f5bdb5432f
compile libnl with -ffunction-sections to make binaries that use genl smaller
...
SVN-Revision: 11600
2008-06-28 17:55:21 +00:00
2b5ce63303
x86: don't attempt to compile grub on darwin
...
SVN-Revision: 11599
2008-06-28 17:54:44 +00:00
04453591af
adds rt_tables to files installed by ip ipkg
...
SVN-Revision: 11598
2008-06-28 17:32:21 +00:00
3dbe2e1093
ebtables: Update to 2.0.8-2
...
SVN-Revision: 11556
2008-06-22 18:41:25 +00:00
0ddeec5cd5
gmp: Update to 4.2.2
...
SVN-Revision: 11555
2008-06-22 18:41:09 +00:00
82a7b76158
e2fsprogs: Update to 1.40.11
...
SVN-Revision: 11554
2008-06-22 18:40:53 +00:00
83d041b094
arptables: Update to 0.0.3-3
...
SVN-Revision: 11553
2008-06-22 18:40:30 +00:00
61f7b17ef0
Add support for Connexant USB ADSL modemds ( #3553 )
...
SVN-Revision: 11549
2008-06-21 13:21:49 +00:00
4d58c059f0
upgrade to uci 0.4.4 (fixes a stupid bug, thx Frédéric Moulins)
...
SVN-Revision: 11548
2008-06-20 17:39:56 +00:00
652fa86fe7
grub: Natively build grub only on x86 linux hosts, cross compile everywhere else. - Closes #3560
...
SVN-Revision: 11542
2008-06-20 01:43:20 +00:00
11d0725b61
Remove the sleep since we delayed bringing up the interface
...
SVN-Revision: 11534
2008-06-18 17:42:10 +00:00
e2e80ab38a
Delay bringing up the interface because some cards requires setting the mode before bringing it up ( #3541 )
...
SVN-Revision: 11533
2008-06-18 17:09:02 +00:00
3e8ab1ed20
linux-uvc: Upgrade to revision 215
...
SVN-Revision: 11519
2008-06-17 05:39:05 +00:00
5a7529a58d
Create $(1)/etc/uci-defaults directory during installation. Thanks Yuji Mano. - Fixes the use of CONFIG_UCI_PRECONFIG under git; git does not track empty directories.
...
SVN-Revision: 11517
2008-06-17 00:44:10 +00:00
0b5f602421
Revert previous bad commit r11512
...
SVN-Revision: 11513
2008-06-16 19:37:00 +00:00
5ee48c0b00
Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory.
...
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
SVN-Revision: 11512
2008-06-16 19:14:13 +00:00
b3e20537ca
libnl: backport memleak fix
...
SVN-Revision: 11500
2008-06-16 12:43:16 +00:00
593c2b7cec
fix libnl compile with older kernels
...
SVN-Revision: 11499
2008-06-16 12:42:36 +00:00
f2e997ac38
remove some unused crap
...
SVN-Revision: 11472
2008-06-15 11:15:35 +00:00
ddd809f9e5
(6/6) bcm57xx: package
...
This is the bcm57xx package. I have tested default vlan functions,
but I dont have the equipment to test more advanced setups. The default
vlan setup seems to be working fine. I also added the activate_gpio
parameter which will make the driver activate the switch via gpio before
probing for it.
I'm not sure which method is best for autoload. For the wrt350n, I
need the activate_gpio parameter. But its probably not a good idea
to add that to the autoload file. On a system without a bcm57xx switch,
isn't it a bad idea to mess with the gpios looking for the switch? Ideally,
wouldn't it be best to load the bcm57xx module from broadcom-diag, after
it has determined which router its on? I tried using 'request_module' from
there, but had no success. For now, I am relying on preinit to load
the bcm57xx module with activate_gpio param, after it has failed to load
switch_robo and switch_adm.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11471
2008-06-15 11:11:28 +00:00
40990382e5
(4/6) bcm57xx: switch-core.c/switch-robo.c check for port already registered
...
This patch prevents switch-robo.c from attempting robo_probe on a port
that is already registered. robo_probe will adjust kernel reference counts
if it detects a switch on the port. If this patch wasn't applied, the
wrt350n would hang on reboot, waiting for the network driver reference count
to reach zero indefinitely.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11469
2008-06-15 11:10:27 +00:00
f7e09198fe
(1/6) bcm57xx: init from diag
...
I've been working to finish up the bcm57xx module package nbd
posted a few months ago. I am no expert, just had some spare
time and some motivation. Here is the background:
https://dev.openwrt.org/ticket/2744
This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP. If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.
Tested on wrt350n.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11466
2008-06-15 11:09:27 +00:00
464ed48321
Remove ssb headers from mac80211 to avoid conflict with in-kernel ones
...
SVN-Revision: 11462
2008-06-13 21:05:26 +00:00
7c029b0355
another patch fix
...
SVN-Revision: 11455
2008-06-13 08:56:06 +00:00
ad9bc6ab09
fix a small comment
...
SVN-Revision: 11454
2008-06-13 07:30:21 +00:00
01c61b0d64
fix ANI and make use of it in all modes except for monitor
...
SVN-Revision: 11453
2008-06-13 01:51:31 +00:00
456893e798
make ip-up scripts aware of network settings
...
SVN-Revision: 11446
2008-06-11 20:03:08 +00:00
0bf765b362
system now knows which timezone it is in
...
SVN-Revision: 11445
2008-06-11 19:59:16 +00:00
6d88031192
Add syskonnect yukon2 support ( #2568 )
...
SVN-Revision: 11437
2008-06-11 15:51:23 +00:00
62bef2bced
madwifi: remove unnecessary part of the 349-reset.patch, add an ANI fix for future HALs
...
SVN-Revision: 11409
2008-06-09 10:17:36 +00:00
ea8b4cb0d7
Compilation fix for hostapd with newer mac80211 code. Thanks Hauke Mehrtens. Fixes #3501
...
SVN-Revision: 11407
2008-06-08 20:19:19 +00:00
50a749e9a7
add button-hotplug driver, will be usable to check status of buttons connected to GPIO lines
...
SVN-Revision: 11401
2008-06-07 18:25:32 +00:00
Imre Kaloz
Florian Fainelli
Matteo Croce
Peter Denison
John Crispin
Felix Fietkau
Steven Barth
Andy Boyett
Yuji Mano
Gabor Juhos