Commit Graph

10975 Commits (ee90339e97665ba2bff7b0a6b46f1676f6699ead)

Author SHA1 Message Date
Luka Perkov ee90339e97 sunxi: drop CONFIG_DEVTMPFS option
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38661
2013-11-06 08:19:31 +00:00
Luka Perkov f14a075cb4 kernel: add some config options
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38660
2013-11-06 08:19:24 +00:00
Gabor Juhos 0c740a80fd ar71xx: image: fix WNDR4300 initramfs image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38659
2013-11-05 18:41:20 +00:00
Gabor Juhos c98db0707c ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38658
2013-11-05 18:41:18 +00:00
Imre Kaloz cc4b946fa2 update for 3.12 final
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38657
2013-11-05 17:46:18 +00:00
Hauke Mehrtens 73ed236907 brcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500L
This closes #14367 and #14328.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38656
2013-11-05 17:09:19 +00:00
Gabor Juhos 08e0613275 ar71xx: generate recovery image for WNDR4300
Extended the Makefile to generate a working factory reset image
for Netgear WNDR4300. The image uses UBI with two volumes squashfs
(rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot
happy, a fake rootfs image is placed into the last erase block
of the kernel partition.

Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
  - restore the NetgearNAND/initramfs macro,
  - remove unused {Squash,Ubi}fsTemplate macros,
  - remove board specific mtd options from CONFIG_CMDLINE, append the
    board specific ubi.mtd parameter to the kernel command line instead,
  - increase kernel partition size to 2MiB,
  - use board specific ini file for ubinize,
  - put jffs2 eof mark into the rootfs_data ubi volume,
  - use KDIR_TMP for temporary images,
  - use the squashfs-raw image,
  - increase kernel partition size to 2MiB,
  - use a local ubinize macro,
  - fix macro parameter comments,
  - put the fake rootfs into the last erase block of the kernel
    partition,
  - move Image/Build/NetgearNAND/buildkernel macro before
    define Image/Build/NetgearNAND,
  - don't use the wndr3700 utility, use '-M' parameter of mkimage to set
    the uImage magic,
  - use '-recovery' suffix for the generated image, it is only usable via
    the fw_recovery function of the bootloader,
  - update commit log]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38655
2013-11-05 16:31:14 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Luka Perkov cb07269988 sunxi: add new target
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38651
2013-11-05 08:00:34 +00:00
Luka Perkov da224973af imx6: drop unused variable from Makefile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38650
2013-11-05 08:00:30 +00:00
Gabor Juhos d5555de5b0 ar71xx: move WNDR4300 profile to the nand subtarget
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38647
2013-11-04 18:37:09 +00:00
Gabor Juhos 3eb676240f ar71xx: Add new subtarget nand for WNDR4300
Add new subtarget nand with UBI/UBIFS including GLUEBI and squashfs.
This target will be used for NAND based router which make use of
UBI (and maybe UBIFS later on) in order to provide proper NAND
support.

Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
  - tweak target.mk:
     change BOARDNAME variable,
     improve Target/Description,
     remove targz and ubifs from FEATURES and add broken flag,
  - optimize kernel configuration:
     disable ubifs, it is not used yet,
     disable unused MTD options,
     disable SPI support
     disable unused network drivers,
     tune kernel command line,
  - remove image/ubinize.cfg, it will be in a follow-up patch
  - move profile modifications into a separate patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38646
2013-11-04 18:37:08 +00:00
Gabor Juhos 496d3e1149 ar71xx: remove yaffs from the generic rootfstype list
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38645
2013-11-04 18:37:07 +00:00
Gabor Juhos ccf7320205 ar71xx: image: dd root.* images in fs specific macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38644
2013-11-04 18:37:06 +00:00
Gabor Juhos 5dba0a237e kernel/3.1[02]: move MTD root device setup code to mtdcore
The current code only allows to automatically set
root device on MTD partitions. Move the code to MTD
core to allow to use it with all MTD devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38643
2013-11-04 18:37:05 +00:00
Gabor Juhos 866dd2a378 kernel: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38642
2013-11-04 18:37:03 +00:00
Hauke Mehrtens c30346c2e1 kernel: add some config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38640
2013-11-03 20:20:14 +00:00
Hauke Mehrtens 24d73fbd33 kernel: bgmac: update backport patch
This adds some more bgmac patches from mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38637
2013-11-03 19:24:39 +00:00
Gabor Juhos 45d26941b4 ar71xx: image: only define profiles for the generic subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38636
2013-11-01 18:33:24 +00:00
Gabor Juhos f0a877e5eb ar71xx: image: add IMAGE_PROFILE variable
Ensures that the 'Default' images are generated
even if the subtarget has no profiles.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38635
2013-11-01 18:33:22 +00:00
Gabor Juhos b2bc45d21e ar71xx: always enable hw ecc support for the ar934x-nfc module
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38634
2013-11-01 18:33:18 +00:00
Hauke Mehrtens 0e655122c6 kernel: add missing config options
The buildbots found some new missing config options.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38633
2013-11-01 08:49:35 +00:00
Luka Perkov e00bc81a56 kirkwood: add userland support for Pogoplug E02
This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38631
2013-10-31 12:04:04 +00:00
Luka Perkov 2b0fa00da8 kirkwood: add Pogoplug E02 Kernel support
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38630
2013-10-31 12:04:02 +00:00
Luka Perkov 6f26ef8b5d kirkwood: extend image/Makefile
* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos

Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 38629
2013-10-31 11:44:28 +00:00
Luka Perkov 59d58990fb imx6: minor image cleanup
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38628
2013-10-31 11:44:27 +00:00
Luka Perkov 672a8cd6ba imx6: update patches
Changes include PCI fixes and various upstream pending patches.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38624
2013-10-30 23:31:26 +00:00
Hauke Mehrtens 2ab978d0a3 kernel: add some missing config options
This was spotted by the buildbots.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38604
2013-10-30 09:48:19 +00:00
Gabor Juhos 379b509362 ramips: enable building of TEW-692GR images
The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.

Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38603
2013-10-30 07:06:24 +00:00
Gabor Juhos dfd4311355 ramips: fix number of GPIOs for RT3352
The RT3352 SoC only supports 46 GPIO lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38602
2013-10-30 07:06:23 +00:00
Gabor Juhos 9186fb342e ramips: remove trailing whitespaces from .dts{,i} files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38601
2013-10-30 07:06:22 +00:00
Gabor Juhos 715f16806f ar71xx: move subtarget specific features to target.mk
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38600
2013-10-30 06:54:59 +00:00
Gabor Juhos 5a08328197 ar71xx: don't build uImages for the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38598
2013-10-30 06:54:55 +00:00
Gabor Juhos 6357738509 ar71xx: disable non Mikrotik boards in the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38597
2013-10-30 06:54:54 +00:00
Gabor Juhos 228c3484c3 ar71xx: fix Kconfig symbol selection for RB95x/RB2011
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38596
2013-10-30 06:54:53 +00:00
Gabor Juhos 64ea60d210 ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38595
2013-10-30 06:51:02 +00:00
Gabor Juhos 2f27f5d404 generic: mtdsplit_uimage: add uImage magic for the WRN2200 board
Should fix boot failure on the WNR2200 boards.
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38594
2013-10-30 06:51:01 +00:00
Gabor Juhos 47b7ce5ec2 ar71xx: add profile and build image for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
  - remove MultiProfile, it makes no sense for a single board
  - move SingleProfile call and the mtdlayout to a different
    location keep things sorted (well, almost)]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38593
2013-10-30 06:50:59 +00:00
Gabor Juhos 003a801dd9 ar71xx: add user-space support for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38592
2013-10-30 06:50:58 +00:00
Gabor Juhos ef8306cfd2 ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board
BXU2000n-2 A1 is a BHU Networks WLAN board, use ar9341 chip.

Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
  - rename and refresh kernel patch,
  - fix some checkpatch warnings and adjust whitespaces in
    mach-bhu-bxu2000n2-a.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38591
2013-10-30 06:50:57 +00:00
Gabor Juhos acd4ea62e7 ar71xx: add user space support for the Sitecom WLR-8100 wireless router
Patchwork: http://patchwork.openwrt.org/patch/4148/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38590
2013-10-30 06:50:55 +00:00
Gabor Juhos 22b5040c64 ar71xx: add kernel support for the Sitecom WLR-8100 wireless router
- unsure about copyright message
  - based on AP136-010

Patchwork: http://patchwork.openwrt.org/patch/4147/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[juhosg: rename and refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38589
2013-10-30 06:50:54 +00:00
Gabor Juhos f6638a8994 ar71xx: add profile and build image for the Dragino2 board
Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg: remove kernel+rootfs partition and use uimage split instead]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38588
2013-10-30 06:50:53 +00:00
Gabor Juhos 7074bb286d ar71xx: add kernel support for DRAGINO2
This patch adds support for DRAGINO2 board (used by
Meshpotato v2). Most of the files included can be
found in the official svn repository provided by the
company [1]. I have just adapt it to the last OpenWrt
trunk revision (Fri Oct 4 10:49:47 2013).

 1. http://svn.dragino.com/dragino2

Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg:
 - rename and refresh kernel patch,
 - fix checkpatch warnings in  mach-dragino2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38587
2013-10-30 06:50:52 +00:00
Luka Perkov 6b2c29d5f0 imx6: update gateworks profile with extra packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38579
2013-10-30 00:50:14 +00:00
Luka Perkov df388048b4 imx6: add initial 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38574
2013-10-29 02:19:09 +00:00
Luka Perkov b8038b78ec imx6: use upstream gateworks board names
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38573
2013-10-29 02:19:07 +00:00
Luka Perkov 3aba97dcba kernel: refresh 3.12 patches on -rc7 release
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38572
2013-10-29 02:19:05 +00:00
Luka Perkov f44c65c7c8 imx6: update 3.10 patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38571
2013-10-29 02:19:03 +00:00
Hauke Mehrtens 7b7c06d2e3 kernel: add missing config optinons
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38570
2013-10-28 19:19:28 +00:00