ed20caeb65
ramips: fix image format for WSR-1166
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43812
2015-01-02 21:53:31 +00:00
10c2bdbc4f
ramips: disable ethernet checksum offloads for mt7621, they are broken
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43811
2015-01-02 21:53:24 +00:00
51b1f0ca5c
ramips: use netif_receive_skb instead of napi_gro_receive when rx csum offload is unavailable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43810
2015-01-02 21:53:18 +00:00
81e3014e6d
ramips: rework and fix m25p80 chunked-io support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43808
2015-01-02 21:53:02 +00:00
aefd3c569c
ramips: split mt7621 spi into a separate driver, increase maximum transfer size
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43807
2015-01-02 21:52:53 +00:00
6bfd210ade
honor the bootloader's bootargs
...
Only overwrite the bootloader's bootargs if "chosen" exists in the dtb
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43802
2015-01-02 16:48:20 +00:00
0ffb7323d0
ralink: remove partitoon map from mt7621.dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43720
2014-12-15 15:55:37 +00:00
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
fbea00b031
ramips: update mtd patches to apply after changes from r43700
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43709
2014-12-15 09:10:43 +00:00
6f2b7567b8
ralink: drop old pinmux nodes from dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43701
2014-12-14 08:57:16 +00:00
263070a2e7
ramips:Add support for Aigale Ai-BR100
...
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 43681
2014-12-13 08:07:03 +00:00
6c4e7b22eb
ralink: fix lenovo y1 wan port mapping
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43667
2014-12-12 16:17:31 +00:00
b1f7a027da
ralink: make uartf functional on AWM002
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43664
2014-12-12 16:17:03 +00:00
1ef2106725
ralink: mt7621 was missing a symbol that made the CC builder fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43629
2014-12-11 18:54:30 +00:00
9a495f6bbb
kernel: refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43564
2014-12-08 12:04:25 +00:00
8a123f6f66
ramips: generate factory images for Nexx devices
...
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 43541
2014-12-07 16:53:22 +00:00
d04c4a311e
ralink: mt7621 is a 1004Kc
...
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 43514
2014-12-03 20:22:42 +00:00
506cf51b53
ralink: fix pci reset patch
...
sorry, forgot to make target/update before commiting the last patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43374
2014-11-24 20:39:48 +00:00
41f9765acd
ralink: add proper reset of pci core
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43370
2014-11-24 19:12:35 +00:00
d93dc245e5
ralink: various fixes to the wm8960 setup code
...
still no sound but the codec is properly detected now, powers up and i can hear
noise on the speakers.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43305
2014-11-19 09:20:12 +00:00
989bfd815b
ralink: make the dmaengine driver compile under 3.14
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43304
2014-11-19 09:20:02 +00:00
e1f6d0dd0a
ralink: fix tx vlan offload and hardware status
...
hardware status and tx vlan offload support on all targets
except rt5350. so i modify the IS_ENABLE condition only for
mt7621.
support mt7621 hardware status reference by SDK. but i don't
have mt7621. if not work just set mt7621 FE_REG_FE_COUNTER_BASE
to 0 to let software count.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 43303
2014-11-19 09:19:57 +00:00
a5f562993e
ralink: support netconsole
...
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 43302
2014-11-19 09:19:49 +00:00
9c5dfd9546
ralink: improve tx vlan offload
...
hardware tx vlan offload only support max 16 vids
now use add/delete vlan interface to update vlan id table
when duplicate vlan id index detect.
disable hardware tx vlan offload support.
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 43301
2014-11-19 09:19:43 +00:00
510ff1f1b8
ralink: merge the mt7620a/n subtargets
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43300
2014-11-19 09:19:38 +00:00
752745a85a
ralink: set ralink_soc on mt7621
...
sdhci failed to init because of this
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43293
2014-11-17 21:58:30 +00:00
32d4348540
ralink: fix pcie reset
...
some old mt7620a uboots dont reset the pcie core properly. work around this
issue in the kernel driver.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43292
2014-11-17 16:27:48 +00:00
28b26fa603
ramips: disable 2.4 ghz on 802.11ac wifi on WHR-1166D
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43283
2014-11-16 12:26:53 +00:00
b3f2d3d01b
ramips: use mediatek,mtd-eeprom instead of ralink for mt76
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43282
2014-11-16 12:26:47 +00:00
02c319c27a
ramips: fix default config breakage on whr-1166d
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43281
2014-11-16 11:39:19 +00:00
c073bf6bdf
ralink: few updates tot he sdhci probe code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43275
2014-11-15 14:35:32 +00:00
ce1c580efb
ralink: make the sdhci module build again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43274
2014-11-14 18:51:41 +00:00
7cc72e4b93
ralink: dont define pm_poweroff
...
this makes gpio-poweroff work
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43254
2014-11-14 16:53:40 +00:00
be23eaa8c3
ralink: fix bank detection in mt7621 gpio driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43253
2014-11-14 16:53:34 +00:00
6d4282086d
ralink: enable the proper drivers in the mt7621 config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43252
2014-11-14 16:53:29 +00:00
0767ee848a
ralink: fix broken pinmux function naming inside mt7621.c
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43251
2014-11-14 16:53:21 +00:00
8cde8a05c9
ralink: update sdhci driver
...
the new driver handles newer SoCs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43250
2014-11-14 16:53:15 +00:00
66463a5b5d
ralink: update pcie driver to load ranges from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43249
2014-11-14 16:53:07 +00:00
7963782b86
ralink: add a new global ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43248
2014-11-14 16:53:01 +00:00
caa29dea2c
ralink: update ethernet driver to use new ralink_soc variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43247
2014-11-14 16:52:52 +00:00
bf8bb5b611
ralink: fix the 10mbit bug on mt7621
...
a missing "val =" caused the AN bit in the phy0 reg to be flushed.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43246
2014-11-14 16:52:47 +00:00
194ca6127e
ralink: improve mt7530 support
...
the SDK does a bit of extra init that we did not do yet when using an external mt7530.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43245
2014-11-14 16:52:42 +00:00
0371dabc13
ralink: add support for WSR-600/1166
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43244
2014-11-14 16:52:36 +00:00
062828aee0
ralink: mt7621 has a different base addr for PVID
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43243
2014-11-14 16:52:30 +00:00
938e1e03fb
ralink: drop some unused code from pci-mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43242
2014-11-14 16:52:25 +00:00
bfcdc8711c
ralink: fix up dts for mt7621 eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43238
2014-11-12 14:55:00 +00:00
86e3315ece
ralink: add support for mt7621 ethernet
...
somehow all switch ports still come up as 10mbit.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43237
2014-11-12 14:54:50 +00:00
45814d150a
ralink: more mt7530 fixes
...
make 1166 wan port work. this broke due to the esw_polling bug
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43236
2014-11-11 11:46:16 +00:00
e399931376
ralink: fix mdio polling of external phys if only 1 phy exists
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43235
2014-11-11 11:46:09 +00:00
6623feb572
ralink: remove IC plus phy driver
...
this driver confuses some boards
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43234
2014-11-11 11:46:02 +00:00
Felix Fietkau
Imre Kaloz
John Crispin
Rafał Miłecki