Commit Graph

239 Commits (ec4ab71c542337afecf456b1f3efc170f90a561d)

Author SHA1 Message Date
Gabor Juhos fe99a2d67d firmware-utils/mktplinkfw: allow to reserve space in the generated images
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39396
2014-01-25 18:12:03 +00:00
John Crispin 9821ce8ed6 ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39248
2014-01-12 17:26:24 +00:00
John Crispin 4bf844e834 firmware-utils: mkhilinkfw breaks the build bots
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39243
2014-01-12 14:03:05 +00:00
John Crispin 2b4a04089f firmware-utils: add HLK-RM04 tool
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39238
2014-01-12 12:07:46 +00:00
John Crispin 3b4152bfda firmware-utils: check_magic() in buffalo-lib.c always return 0
spotted with cppcheck

Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

SVN-Revision: 39171
2013-12-27 21:15:31 +00:00
Gabor Juhos 2b6ca18e82 firmware-utils/mkplinkfw: add TL-WA801ND v2 support
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Patchwork: http://patchwork.openwrt.org/patch/4503/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39066
2013-12-15 20:39:13 +00:00
Gabor Juhos fd8e5b04b4 firmware-utils/trx: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38963
2013-11-30 18:30:57 +00:00
Gabor Juhos b61b447472 firmware-utils/trx: fix two bugs
- fix crc32 calculation if -F was enabled.

 - don't convert the crc32 to little endian twice.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 38962
2013-11-30 18:30:56 +00:00
Gabor Juhos 4069a50de6 firmware-utils/mkplinkfw: add TL-WR1043ND v2 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38957
2013-11-29 20:51:15 +00:00
Gabor Juhos 5a85a21e06 tools: adapt addpattern for WD's Range Extender
A few things had to be changed to add support for these devices:
 - support code patterns with 8 characters
 - new board definition for the range extender device

Patchwork: http://patchwork.openwrt.org/patch/4280/
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38685
2013-11-07 22:31:48 +00:00
Gabor Juhos d9c9633d19 firmware-utils: remove the wndr3700 utility
It is not used anymore.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38663
2013-11-06 10:16:40 +00:00
Gabor Juhos 50458fb24c mkfwimage: Increase RSPRO maximum size to 0xF00000 (15 MiB)
RSPRO has 16MiB of Flash, using the following layout:

[    2.930000] 0x000000000000-0x000000030000 : "RedBoot"
[    2.940000] 0x000000030000-0x000000130000 : "kernel"
[    2.950000] 0x000000130000-0x000000ff0000 : "rootfs"
[    2.960000] 0x000000ff0000-0x000000fff000 : "FIS directory"
[    2.970000] 0x000000fff000-0x000001000000 : "RedBoot config"

Firmware images contain kernel and rootfs, so they can use up to 0xFF0000 -
0x30000 = 0xFC0000 (15,75MiB) of space. We don't include the RedBoot and FIS
partitions and leave an extra 0xC0000 (768KiB) of space.

This is based on revision 18410 which sets the limit to 0xB00000 (11 MiB).

Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38484
2013-10-20 15:59:08 +00:00
John Crispin fa4ca9d7eb tools: add tool to generate dcs93xl images
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38317
2013-10-07 15:01:05 +00:00
Gabor Juhos da3700b2a6 firmware-utils/mktplinkfw: add support for the TL-MR13U board
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38065
2013-09-19 17:52:44 +00:00
John Crispin 15721d535b firmware-utils: add a tool TP-Link v2 image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37726
2013-08-06 16:25:35 +00:00
John Crispin 1af56d7c46 firmware-utils: remove v2 support
we will use gabors patch instead

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37725
2013-08-06 16:25:24 +00:00
John Crispin 815d9334e2 firmware-utils: fix segfault introduced by v2 changes
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 37724
2013-08-06 14:32:50 +00:00
John Crispin eb844ad321 firmware-utils: add support for TDW8970 to mktplinkfw
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37718
2013-08-06 12:31:06 +00:00
John Crispin 85cb2c4f9e firmware-utils: add v2 header support to firmware-utils
only image build works. inspect and md5 checksum support are not implemented yet

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37717
2013-08-06 12:30:52 +00:00
John Crispin aaedf6c8c6 ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.

Support for Poray devices was worked on by:

Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

SVN-Revision: 37635
2013-08-01 14:30:46 +00:00
Gabor Juhos 2fb993fdbf firmware-utils/mktplinkfw: add support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/40050677370

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 37549
2013-07-26 07:32:00 +00:00
Florian Fainelli b5b3e94132 tools: add Broadcom cable modem firmware image creator
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36873
2013-06-06 22:21:52 +00:00
Gabor Juhos 3a407a0986 firmware-utils/mkcameofw: allow to use combined kernel image
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36583
2013-05-08 17:11:08 +00:00
Gabor Juhos 9658206abc firmware-utils/mktplinkfw: add description for -W option into usage output
Add description for -W <hwrev> option into usage output of mktplinkfw.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36497
2013-04-30 10:44:10 +00:00
Gabor Juhos 85db8b7a21 firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36455
2013-04-26 17:00:47 +00:00
John Crispin 48feea4861 Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.

This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.

Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming

The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.

The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.

http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
Gabor Juhos 55e2ae7452 firmware-utils/mktplinkfw: Add support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35963
2013-03-11 15:55:23 +00:00
Gabor Juhos ddb29bebf5 firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boards
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35787
2013-02-25 20:37:32 +00:00
Gabor Juhos c75c1e03a3 firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35593
2013-02-13 16:51:24 +00:00
Gabor Juhos cbeb862b95 firmware-utils/mktplinkfw: add TP-LINK TL-WR743ND v2 support
AR9331 based, these same as 741v4

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35448
2013-02-02 10:01:11 +00:00
John Crispin 2739a19992 adds support for Edimax BR-6524N
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35019
2013-01-06 11:11:30 +00:00
Gabor Juhos cbc3aebcc7 firmware-utils/mktplinkfw: add support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34781
2012-12-19 08:50:43 +00:00
Gabor Juhos 113b6b96c1 firmware-utils/mkfwimage2: allow to use numbers in partition names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34729
2012-12-17 12:28:15 +00:00
Gabor Juhos dfab9cb4e7 firmware-utils/mktplinkfw: add support for TP-LINK WA801NDv1
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34575
2012-12-07 19:10:54 +00:00
Gabor Juhos 588c81d1e0 firmware-utils/mktplinkfw: add support for TL-WA7510N
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]

Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34189
2012-11-13 14:48:02 +00:00
Gabor Juhos 86b788b1b4 firmware-utils: new tool for fixing U-Media firmware headers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33848
2012-10-18 07:23:09 +00:00
Gabor Juhos 25250a22ef tools/firmware-utils: add seama tool
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33840
2012-10-18 07:22:57 +00:00
Jonas Gorski 997ace7e5e firmware-utils: move bcm_tag.h here
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.

SVN-Revision: 33655
2012-10-08 09:59:50 +00:00
Gabor Juhos 872e798473 tools/firmware-utils: add a new tool for TEW-712BR firmware generation
SVN-Revision: 33233
2012-08-22 20:15:34 +00:00
John Crispin 6c9d20d6e7 tools/firmware-utils/ptgen option to use MB rounding
SVN-Revision: 33218
2012-08-22 09:22:38 +00:00
Gabor Juhos 25ac1447ed tools/firmware-utils: add tool for DIR-651-H1 firmware generation
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>

SVN-Revision: 33204
2012-08-17 17:56:02 +00:00
Jo-Philipp Wich cf1698c637 use HOST_STATIC_LINKING instead of hardcoding -static
SVN-Revision: 33140
2012-08-12 12:34:30 +00:00
Jo-Philipp Wich e2e55d7acd firmware-utils: link statically
SVN-Revision: 33117
2012-08-10 19:27:08 +00:00
John Crispin fb81e7a802 adds mkdapimg
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32822
2012-07-24 20:38:49 +00:00
Gabor Juhos a45427bc79 firmware-utils/mktplinkfw: allow to specify firmware version
SVN-Revision: 32616
2012-07-05 16:25:29 +00:00
Jonas Gorski b31108e0a8 tools: imagetag: add parameter for padding images
Allow images to be padded to a certain size. This prevents CFE from
flashing them to the second image offset.

SVN-Revision: 31875
2012-05-27 13:22:19 +00:00
Gabor Juhos de7324674a firmware-utils/mktplinkfw: add support for the TL-WR1041N v2
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31609
2012-05-05 17:02:38 +00:00
Gabor Juhos 84267683bb firmware-utils/mkfwimage: allow to override firmware magic
SVN-Revision: 30627
2012-02-18 14:45:54 +00:00
John Crispin cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
Gabor Juhos 1338af2640 firmware-utils/mkmylofw: add WPE72 support
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29913
2012-01-26 17:01:43 +00:00