dbb77e39a0
base-files: add extra version configuration options for OEM manufacturer info
...
Creates /etc/device_info which will be used to fill in information for
WPS and other protocols that need manufacturer/device information
This helps with creating OpenWrt firmware for OEM or rebranded devices.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41884
2014-07-29 13:30:12 +00:00
ad27df85b7
BB is branched, get ready for Chaos Calmer
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41870
2014-07-29 08:24:57 +00:00
3c9cfbeebd
base-files: Remove stale calls to start() in initscripts.
...
based on http://patchwork.openwrt.org/patch/5969/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41840
2014-07-26 20:36:15 +00:00
69abf630cf
base-files: strip quotes from the MAC address in macaddr_canonicalize()
...
Extracted from http://patchwork.openwrt.org/patch/5716/
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41639
2014-07-14 10:25:49 +00:00
59cfa05bf3
base-files: adjust the default netfilter tcp established connection timeout as per RFC 5382 ( #17098 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41599
2014-07-13 10:24:34 +00:00
be26421f45
sysupgrade: Enable killing of all processes under upgraded
...
If the sysupgrade scripts is called under upgraded, it will not kill all
other processes as it should to avoid interference by locked filesystem.
This patch checks the parent and if it is upgraded, it kills all.
Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 41563
2014-07-10 19:16:27 +00:00
d288a7903d
rc.common: when reloading a service using procd, fall back to calling start instead of restart
...
This avoids unnecessary service restarts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41490
2014-07-03 06:21:49 +00:00
66ae4803e2
base-files: fix ramfs / nand upgrade
...
/lib/{imx6,lantiq,...}.sh are needed in the ramfs for sysupgrade to work.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41440
2014-07-01 10:26:14 +00:00
be2a057787
base-files: define yes/no as valid boolean options
...
ubox validate_data defines yes/no as valid boolean options, do the same in
config_get_bool too.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41405
2014-06-29 23:05:05 +00:00
818e38625f
base-files: add enabled config option for ntp service
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41354
2014-06-27 07:52:06 +00:00
3a9bfa5938
base-files: add a post start hook to the procd init.d api
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41344
2014-06-26 11:43:30 +00:00
3fea61afe8
base-files: update copyright headers
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41334
2014-06-24 18:18:50 +00:00
09273f5c0a
base-files: regenerate the /lib64 symlink when switching to a ramdisk
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41284
2014-06-20 13:41:08 +00:00
7eb721425e
base-files: depend on jsonfilter and rewrite network.sh to use it
...
Switches /lib/functions/network.sh from jshn based json parsing to
jsonfilter expression while keeping the existing api.
Expensive methods like "network_find_wan" are up to 20x faster now.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41281
2014-06-19 16:06:44 +00:00
4b1c48bc93
base-files: add upgraded to the list of daemons not killed
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41268
2014-06-19 14:12:55 +00:00
3dca5a158d
procd: various cleanups to /lib/upgrade/nand.sh
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41222
2014-06-16 18:55:14 +00:00
bedd6f44a5
base-files: properly remove stderr from zcat/bzcat
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41135
2014-06-11 13:00:25 +00:00
c43d614f89
base-files: add an ugly hack for nand to sysupgrade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41126
2014-06-11 12:59:37 +00:00
e73538ba56
base-files: include more ubi* tools in sysupgrade ramdisk
...
Also add some more busybox symlinks which are useful for sysupgrade
on UBI-enabled devices.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41125
2014-06-11 12:59:33 +00:00
281f415885
base-files: fix argument order to date in sysfixtime so that it also works with musl
...
Seems like the reverse order relies on GNU specific getopt hackery which
musl does not replicate
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41045
2014-06-07 16:14:47 +00:00
47cf6f9cd1
base-files: /etc/rc.button/power should be executable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40993
2014-06-03 06:52:46 +00:00
0de0310a9c
base-files: Allow installation of symlinks using RAMFS_COPY_BIN env var.
...
http://patchwork.openwrt.org/patch/5086/
Signed-off-by: karl.vogel@gmail.com
SVN-Revision: 40943
2014-06-02 12:45:13 +00:00
37eb27e47d
base-files: remove function service_kill
...
Function service_kill is deprecated and has no user, so remove it.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
SVN-Revision: 40912
2014-06-02 12:43:10 +00:00
36d0a5e3fb
base-files: add simple shutdown script
...
Since svn rev [38557] we support power buttons, for example
the ACPI power button on x86 machines.
Add a simple shutdown script to /etc/rc.button, to gracefully shutdown
the machine after the power button is pressed.
Tested on x86 and x86_64 in a kvm virtual machine.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 40909
2014-06-02 12:43:00 +00:00
44e2de03a4
base-files: calling stop_service before procd_kill.
...
Before this patch, doing `/e/c/network restart' will emit the folloing
error by `ubus network.wireless down "{}"' because netifd already quit
by that time.
Command failed: not found
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40906
2014-06-02 12:42:44 +00:00
dcf42b40fc
base-files: removes logging
...
Since logd haven't started at this point, logging does not work.
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
SVN-Revision: 40904
2014-06-02 12:42:37 +00:00
bb240b50b6
base-files: enable force_link for lan by default
...
This allows services to bind to it at boot time instead of waiting for a
cable to be plugged in
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40773
2014-05-16 19:36:22 +00:00
c622a37101
base-files: remove duplicate stop_service() function.
...
It was introduced in commit 2f966e8, "base-files: add a post start hook
for procd managed services".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40576
2014-04-27 18:48:57 +00:00
a423055592
base-files: remove duplicate wps button handler ( #15621 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40528
2014-04-18 17:27:38 +00:00
dd58e15b84
base-files: add back missing function for find_mtd_part to /lib/functions.sh ( fixes #15496 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40426
2014-04-08 21:17:49 +00:00
665d39f698
base-files: the ubi tol should be installed when jumping to ram_fs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40420
2014-04-07 15:35:20 +00:00
1d5ac95850
base-files: make use of new fstools
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40416
2014-04-07 15:10:15 +00:00
28f4f4a6d7
/lib/functions.sh: remove config_rename()
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40412
2014-04-07 10:29:51 +00:00
4a9ea80ef0
/lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40411
2014-04-07 10:29:47 +00:00
e700dcaf04
/lib/functions.sh: remove jffs2_mark_erase()
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40410
2014-04-07 10:29:42 +00:00
d368cc63fe
base-files: remove config_clear() and list_remove()
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40409
2014-04-07 10:01:59 +00:00
3d275a8deb
base-files: move uci_apply_defaults() to /etc/init.d/boot
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40408
2014-04-07 10:01:54 +00:00
4a6ad541d8
/lib/functions.sh: remove hotplug_dev()
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40406
2014-04-07 09:50:26 +00:00
ba2b6f661b
/lib/functions.sh: remove strtok()
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40405
2014-04-07 09:50:23 +00:00
c27c5b9cbc
/lib/functions.sh: move preinit related functions to /lib/functions/preinit.sh
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40404
2014-04-07 09:50:19 +00:00
e90b695157
/lib/functions.sh: remove pi_include()
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40403
2014-04-07 09:50:15 +00:00
1d763171bf
/lib/functions.sh: remove jffs2_ready()
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40402
2014-04-07 09:50:11 +00:00
0f2524f473
/lib/functions.sh: remove support for non-overlayfs overlay fopivot types
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40401
2014-04-07 09:50:07 +00:00
08b4924401
ubi-utils: mini version of mtd-utils that only includes ubi tools
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40367
2014-04-03 14:26:42 +00:00
0dc9d8d6ff
fstools: add the new fstools package
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39895
2014-03-12 19:32:51 +00:00
6a4ecd05f0
the root password should be empty for real, like before
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39650
2014-02-21 10:39:14 +00:00
7917a87d12
base-files: split /etc/init.d/boot into 2 files
...
this allows us to bind a procd trigger to system.@system[-1]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39615
2014-02-18 13:33:40 +00:00
6ae1433ab9
base-files: expose taint flags in /etc/openwrt_release
...
SVN-Revision: 39437
2014-01-31 15:48:47 +00:00
73344b9c56
Add sysfixtime init script, replacement of luci_fixtime
...
Simply scan for the most recent file in /etc and set
system time to this file modification time if it's in the future
It allow some time dependent program to work immediatly
without waiting for ntpd to sync
v1: v2: bad approach
v3: simply scan /etc, thanks to Bastian Bittorf for the idea
v4: use sort -n, thanks to Catalin Patulea
v5: use [] instead of [[]], thanks to Andreas Mohr
v6: use openwrt style, thanks to Bastian Bittorf
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 39422
2014-01-29 13:17:03 +00:00
d66d2ad104
base-files: add ucidef_add_switch_port function
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39372
2014-01-23 11:33:41 +00:00
f18112883f
sysupgrade: do not kill any processes in failsafe
...
sysugrade killed the lock causing failsafe to stop
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39318
2014-01-17 22:12:05 +00:00
834204bda6
base-files: fix mount-utils incompatibility
...
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
SVN-Revision: 39169
2013-12-27 21:15:09 +00:00
ef0ce72b39
base-files: ipcalc.sh: support bit length as netmask parameter
...
SVN-Revision: 39100
2013-12-16 16:29:23 +00:00
fe230cac18
base-files: add network_get_protocol() to /lib/functions/network.sh
...
SVN-Revision: 39099
2013-12-16 16:28:45 +00:00
b656a56225
/sbin/wifi: reload network/wireless on wifi restart
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39036
2013-12-11 19:48:19 +00:00
3ceb6b3274
base-files: fix whitespaces
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39006
2013-12-09 11:30:14 +00:00
6e0fafd816
wifi: restart netifd wifi interfaces on the "up" command like the old variant
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38990
2013-12-02 16:53:27 +00:00
3c50feca19
wifi: rename the "reload" (restarting non-netifd wifi) command to "reload_legacy"
...
Add a new "reload" command that reloads the netifd config as well
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38989
2013-12-02 16:53:24 +00:00
498d84fc4e
netifd: add wireless configuration support and port mac80211 to the new framework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38988
2013-12-02 16:41:03 +00:00
93e9a71538
base-files: allow users to delect debug level during boot
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38909
2013-11-25 08:34:55 +00:00
69598dd020
base-files: add the DEVICENAME variable for hotplug scripts
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38861
2013-11-19 00:03:39 +00:00
ff17114ba1
ar71xx: Unifi AP Pro sysupgrade patch
...
The current implementation of mtd will not append the backup
file created by sysupgrade to the correct partition, as mtd will append
the data to first jffs2 partition it finds. As the kernel is also
stored on a jffs2 partition (which resides before the overlay
partition), the data will be appended to this partition.
To fix this problem, a new option
-s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0"
is added to mtd.
Signed-off-by: Peter Wagner <tripolar@gmx.at>
SVN-Revision: 38807
2013-11-14 19:38:54 +00:00
b7914344ad
base-files: add macaddr_canonicalize helper function
...
In commit r38690, the MAC address canonicalization
has been converted to use 'tr' instead of 'printf'.
This only works if with MAC addresses which uses
the 'xx:xx:xx:xx:xx:xx' format.
However on some boards, the MAC addresses are stored
in different format in the mtd partition. Some vendors
are using hyphens or dots as separators instead of
colons. Also the leading zeroes may be missing from the
individual octets or those are replaced with spaces.
Add a new function which can be used to convert these
into the 'xx:xx:xx:xx:xx:xx' format. Also update the
'mtd_get_mac_ascii' function to use the new helper.
The helper function is based on this code:
http://isquared.nl/blog/2010/08/11/Bash-function-to-canonicalize-MAC-addresses/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38803
2013-11-14 17:44:42 +00:00
1df0179b28
base-files: don't enter failsafe if triggered by switch
...
Fixes failsafe issues with switches after r38725.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38770
2013-11-11 23:34:11 +00:00
0d82bbb1fb
base-files: don't kill nas for sysupgrade
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38766
2013-11-11 22:12:58 +00:00
c902a76f4d
base-files: fix typo in rfkill script
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38742
2013-11-11 18:12:30 +00:00
871744f5de
base-files: update rfkill script to work with slider buttons
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38729
2013-11-11 12:19:22 +00:00
243179f9f6
base-files: add a generic wps button handler
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38726
2013-11-11 12:19:10 +00:00
23cf426324
base-files: mtd_get_mac_ascii bugfix
...
The mtd_get_mac_ascii utility function was broken. This fixes it.
- Remove the superfluous include of /lib/functions.sh. The
function is already in that file so it is pointless,
- only use a variable if the whole key word matches,
- don't try to process the MAC address if it is empty,
- use 'tr' to canonicalize the MAC address,
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[juhosg: add more fixes, update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38690
2013-11-08 12:16:21 +00:00
76506e7fa4
base-files: Make /etc/init.d/boot restartable
...
Only reload hostname and timezone config on /etc/init.d/boot restart.
Module loading and basic boot setup is only done during boot.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 38670
2013-11-07 12:45:57 +00:00
cbdd346b11
Add package signing infrastructure
...
Add package signing key and certificate configuration options to the
"Image configuration" submenu. If enabled, the Packages.gz list will
be signed as file Packages.sig. The passphrase for the signing key can
be sourced from a file or entered by the user. The signing certificate
is automatically added to the firmware image if opkg-smime is selected.
Signed-off-by: Evan Hunt <each@isc.org>
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 38284
2013-10-02 12:12:10 +00:00
950428fb1b
base-files: add a post start hook for procd managed services
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38024
2013-09-17 21:45:34 +00:00
b7f8f212ae
base-files: implement -l (--list-backup) sysupgrade parameter to list the files that would be backed up
...
SVN-Revision: 37627
2013-07-31 18:11:55 +00:00
2a1ccf1830
base-files: abort sysupgrade if file specified with --restore-config is not found
...
SVN-Revision: 37624
2013-07-31 14:10:34 +00:00
2771edf647
base-files: implement -T (--test) sysupgrade parameter to verify image without actually flashing it
...
SVN-Revision: 37620
2013-07-30 16:42:05 +00:00
3e54dbbf60
base-files: be verbose when entering failsafe due to a button being pressed
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37535
2013-07-25 20:28:36 +00:00
8d55ea10ad
base-files: add mtd_get_part_size helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37475
2013-07-20 09:25:49 +00:00
67f1d364b8
base-files/busybox: move ntpd init script from base-files to busybox
...
SVN-Revision: 37383
2013-07-17 22:24:45 +00:00
55178554c2
base-files: reject invalid uci keys in network_get_device() and related procedures ( #13886 )
...
SVN-Revision: 37345
2013-07-15 13:42:58 +00:00
b95bdc8ab5
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37282
2013-07-14 12:56:58 +00:00
8eb56a88a4
procd: add a small script that handles config reloads until configd is ready
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37248
2013-07-11 17:00:54 +00:00
8069d87d3c
base-files: convert sysntpd init script to procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37244
2013-07-11 17:00:35 +00:00
06ae364c3d
base-files: run readlink on initscript name before opening services
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37241
2013-07-11 17:00:21 +00:00
523114e741
base-file: usbfs is no longer mounted under /proc/bus/usb
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37240
2013-07-11 17:00:17 +00:00
9e36e10cf7
base-files: add 2 missing variable defines
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37204
2013-07-08 16:35:02 +00:00
43a3d87b83
package: fix insmod on install
...
the procd changes broke the postinst insmod.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37015
2013-06-22 22:09:40 +00:00
4c43cacce0
base-files: module loading is now handled by ubox/kmodloader
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37003
2013-06-21 16:53:59 +00:00
d0db343fc4
base-files: /etc/init.d/rcS is no longer needed, procd handles this for us now
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37002
2013-06-21 16:53:55 +00:00
533dfc39e3
base-files: drop 2 pointless hotplug trigger stubs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37001
2013-06-21 16:53:51 +00:00
af95449273
base-files: procd is now the init process
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36998
2013-06-21 16:53:38 +00:00
aa2fc19800
base-files: procd init is now the default, remove files.old
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36996
2013-06-21 16:53:26 +00:00
265a2deba3
base-files: network.sh: extend network_get_ipaddr6() / network_get_subnet6() to take ipv6-prefix-assignment into account, add further helper functions to fetch all ips of a given interface
...
SVN-Revision: 36942
2013-06-17 11:33:36 +00:00
33c620773d
base-files: remove unnecessary early sysctl-hack
...
SVN-Revision: 36920
2013-06-11 14:10:45 +00:00
e2f33bedfa
base-files: set default IPv6 forwarding value to 1
...
SVN-Revision: 36918
2013-06-11 13:30:18 +00:00
e078f649b5
procd: make the preinit rules wildcard all buttons for failsafe
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36896
2013-06-10 08:24:44 +00:00
1f52c5a72c
sysupgrade: create state file so procd knows when a sysupgrade is in progress
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36893
2013-06-10 08:24:31 +00:00
5e45a68a4a
base-files: fix failsafe via button press
...
entering failsafe by pressing a button during boot was broken for procd as init
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36891
2013-06-10 08:24:13 +00:00
9353e01af4
base-files: change PATH order
...
This allows packages to override busybox applets by placing the new
binaries in /usr/{sbin,bin}
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36890
2013-06-10 08:24:02 +00:00
3f67360012
base-files: use less entropy when generating ULAs
...
SVN-Revision: 36865
2013-06-06 09:52:00 +00:00
026271d03c
base-files: change network_find_wan() procedure to ignore default gateways in different routing tables
...
SVN-Revision: 36553
2013-05-06 09:33:56 +00:00
Felix Fietkau
Imre Kaloz
John Crispin
Gabor Juhos
Luka Perkov
Jo-Philipp Wich
Hauke Mehrtens
Steven Barth