a5c0ad6354
brcm47xx: add initial support for kernel 3.10
...
SVN-Revision: 37287
2013-07-14 13:44:45 +00:00
ef0b9be95e
brcm47xx: do not load the kernel modules needed for Ethernet manually
...
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.
SVN-Revision: 37284
2013-07-14 12:59:00 +00:00
9a5a262324
broadcom-diag: make it work with kernel 3.10
...
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.
SVN-Revision: 37280
2013-07-14 11:30:31 +00:00
c7370edf98
broadcom-diag: check the correct value for not null.
...
This also fixes a compile warning.
SVN-Revision: 37279
2013-07-14 11:28:37 +00:00
63d818a219
broadcom-diag: reoder some parts.
...
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.
SVN-Revision: 37278
2013-07-14 11:26:35 +00:00
299c2ceafa
mac80211: tweak mac address allocation
...
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37269
2013-07-13 11:39:48 +00:00
92961e0917
mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37265
2013-07-12 08:10:19 +00:00
f8543faec4
mac80211: merge a fix for PS-Poll handling, refresh patches
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37264
2013-07-12 07:59:59 +00:00
e389c2b410
mac80211: remove bogus module params from compat.ko
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37263
2013-07-12 07:59:51 +00:00
bec39b26ad
kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37256
2013-07-11 20:56:30 +00:00
c38b7b3913
kernel: make libsas depend on x86
...
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37254
2013-07-11 20:56:22 +00:00
0e479250a6
kernel: package the HW random core module
...
And update the crypto-hw-hifn-795x to use it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37231
2013-07-10 19:42:48 +00:00
eba9b8a324
kernel: unbreal of_i2c selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37201
2013-07-08 09:01:52 +00:00
fc40051569
lantiq: move dsl tools to package/network/config
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37198
2013-07-08 09:01:38 +00:00
8fdf418c96
ltq-hcd: remove prebuilt module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37190
2013-07-08 00:37:50 +00:00
a1734998ee
kernel: fix 8250 ko name for 3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37164
2013-07-04 13:31:28 +00:00
cb179cb262
mac80211: make rt2x00_soc depend on !rt3883
...
https://dev.openwrt.org/ticket/13777
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37162
2013-07-04 13:31:18 +00:00
e15a16bfd7
button-hotplug: Add KEY_POWER handling
...
When running OpenWrt within KVM KEY_POWER is generated from the ACPI
button driver when restarting or powering down the VM.
Extend button-hotplug to allow user space handlers for these events.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/3799/
SVN-Revision: 37160
2013-07-04 13:31:09 +00:00
6988613f7a
gpio-button-hotplug: add support for EV_SW
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37130
2013-07-02 10:45:31 +00:00
16079fbd9a
rt2x00: fix rf id override for RT5350
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37109
2013-06-30 17:54:20 +00:00
2d8990256c
mac80211: use a new tarball with updated backport code
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37105
2013-06-30 14:49:14 +00:00
12c033dfd9
mac80211: update to wireless-testing 2013-06-27, fix ATH_USER_REGD handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37097
2013-06-30 10:44:19 +00:00
0f6e9c9fcc
gpio-button-hotplug: improve gpio button debouncing, verify state changes over multiple polls. fixes spurious failsafe triggers ( #13784 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37090
2013-06-29 19:01:49 +00:00
ae6fc0e4bd
ath9k: fix tx queue pending frame counter when dropping packets
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37081
2013-06-29 12:38:15 +00:00
78ac19be04
mac80211: fix cck rate sampling in minstrel_ht
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37078
2013-06-28 19:14:54 +00:00
1761b7b370
mac80211: disable rt2x00 on mt7620a
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37037
2013-06-27 07:25:13 +00:00
0f003be010
ath9k: fix a minor rcu issue
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37013
2013-06-22 13:59:55 +00:00
fdb8d23745
mac80211: fix compile error on rt2x00 when buildin for SoC
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37008
2013-06-21 16:54:46 +00:00
4ebf19b48f
packages: clean up the package folder
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37007
2013-06-21 16:54:37 +00:00
4e0c649783
kernel: add dependencies for kernel 3.10
...
SVN-Revision: 36925
2013-06-12 13:59:34 +00:00
dff1529d2a
modules: make all led and button modules used during boot priority 1
...
This makes sure the modules are symlinked in /etc/modules-boot.d/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36892
2013-06-10 08:24:25 +00:00
eed8141976
kmod-usb-net-cdc-mbim: fix module loading
...
cdc_mbim should be loaded after cdc_ncm (closes : #13562 )
SVN-Revision: 36856
2013-06-05 14:34:50 +00:00
8170c9cfb0
add some more symbols
...
SVN-Revision: 36834
2013-06-04 11:23:27 +00:00
87203c4049
kernel: adapt module paths for 3.10-rc1
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36662
2013-05-19 18:36:09 +00:00
dc00dbd085
kernel: modules: kmod-fs-isofs depends on kmod-lib-zlib
...
Add missing dependency. Fixes #11624 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36593
2013-05-09 20:50:10 +00:00
826b4e36c4
kernel: add veth module
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36540
2013-05-03 15:16:50 +00:00
7f2743d458
kernel: netfilter.mk: Explicitly set the order of autoloaded modules
...
In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.
So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512
2013-05-02 11:25:18 +00:00
af30e5e6bb
Enable hidraw support.
...
It's needed for dealing with certain UART-to-USB adapters built into
e.g. weather stations, and increases the hid module package only
slightly (e.g. on ar71xx: 35k -> 37k).
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36415
2013-04-24 09:49:09 +00:00
2cea3d3949
Add kernel module package for hid-generic driver.
...
Needed to support e.g. keyboards and mice.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36414
2013-04-24 09:49:03 +00:00
49799d344d
kernel: add kmod-mcp23s08 package
...
Package up the Microchip MCP23S08 I/O expander driver. Needed on the
CalAmp LMU5000 board.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
[jogo@openwrt.org: fix subject]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36393
2013-04-23 09:21:55 +00:00
38b4865a68
package/kernel: only include i2c-of if CONFIG_OF enabled
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36227
2013-04-06 16:55:25 +00:00
bf57f33f02
kernel: Allow talitos crypto hw module selection
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36224
2013-04-06 12:41:06 +00:00
1c8d2aec18
unbreak i2c-mv64xxx dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36192
2013-04-03 12:58:06 +00:00
8baf097b84
fix borken of-i2c dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36191
2013-04-03 12:51:12 +00:00
30ee3ef24e
add cdc-mbim module
...
http://patchwork.openwrt.org/patch/3370/
Signed-off-by: Rusink Rusinkoff <rzrusink@gmail.com>
SVN-Revision: 36184
2013-04-03 10:00:55 +00:00
219313833a
Add INA2XX current sensor module.
...
This is a I2C current/voltage/power sensor.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36182
2013-04-03 10:00:44 +00:00
7852c48ffd
add lm92 kernel module
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36181
2013-04-03 10:00:40 +00:00
62b5098b35
add pcf857x kernel module
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36180
2013-04-03 10:00:36 +00:00
c9254f5b5d
make OF_I2C build as part of i2c-core
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36179
2013-04-03 10:00:32 +00:00
c9544f4af0
kernel: add some fixes for kernel 3.9
...
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
SVN-Revision: 36098
2013-03-20 21:59:24 +00:00
Hauke Mehrtens
Felix Fietkau
Florian Fainelli
John Crispin
Luka Perkov
Nicolas Thill
Imre Kaloz
Jonas Gorski
Jo-Philipp Wich
Gabor Juhos