Commit Graph

381 Commits (de69c9edb0665d43ba2caf7fb3f79200f91eb6fc)

Author SHA1 Message Date
Jonas Gorski fb81a9b5ed ixp4xx: replace magic number with macros in avila/ixdp425/miccpt PCI routing setup
Replace magic number with the appropriate macro in
avila/ixdp425/miccpt PCI routing setup.
Signed-off-by: Tamas TEVESZ <ice@extreme.hu>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37154
2013-07-03 17:51:54 +00:00
Jonas Gorski cdd6c5b750 ixp4xx: switch to kernel 3.10
Fixes network issues at least on NSLU2 (#13801).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37153
2013-07-03 17:51:44 +00:00
Jonas Gorski 87c0c2d81d ixp4xx: add support for linux 3.10
Run tested on a NSLU2.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 37124
2013-07-01 18:42:49 +00:00
Florian Fainelli 6a4f2922f6 targets: prepare for supporting normal and initramfs images
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 37049
2013-06-27 19:58:31 +00:00
Florian Fainelli 1e103b2ecc target: enable XZ BCJ decompressor code after r35097
Required to actually be able to mount squashfs xz compressed
filesystems.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35156
2013-01-14 16:34:25 +00:00
Florian Fainelli 33f6c5ddb9 kernel: add missing USB configuration symbols after r34501
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34568
2012-12-07 11:01:53 +00:00
Gabor Juhos 1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Imre Kaloz 527c473674 add support for the Tonze AP-422/425
SVN-Revision: 34165
2012-11-11 21:04:30 +00:00
Imre Kaloz ee9e3bf82e refresh patch
SVN-Revision: 34164
2012-11-11 21:03:52 +00:00
Imre Kaloz 4658e463d9 move fixed mapping of internal devices into vmalloc region
SVN-Revision: 34158
2012-11-11 19:29:27 +00:00
Imre Kaloz f2b75b517b fixup typos in the compex patch
SVN-Revision: 34104
2012-11-07 07:51:24 +00:00
Imre Kaloz d822ecfdf8 use the mainline machname for the compex boards
SVN-Revision: 34083
2012-11-05 11:38:23 +00:00
Gabor Juhos e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Felix Fietkau 96fa602499 ixp4xx: add sysupgrade support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

 target/linux/ixp4xx/base-files/lib/ixp4xx.sh           |   25 ++
 target/linux/ixp4xx/base-files/lib/upgrade/platform.sh |  156 +++++++++++++++++
 target/linux/ixp4xx/image/Makefile                     |   11 +
 3 files changed, 192 insertions(+)

SVN-Revision: 33828
2012-10-17 22:03:46 +00:00
John Crispin 6993e19532 drop GPIODEV platform code
SVN-Revision: 33825
2012-10-17 21:53:37 +00:00
John Crispin ba6751058b gpiodev/gpioctl RIP
SVN-Revision: 33725
2012-10-11 11:58:09 +00:00
Imre Kaloz 9b22ca8042 The Gateworks System Controller (GSC) is an i2c device that provides system level monitoring and control of Gateworks boards. It is used on several product families spanning several different target architectures (ixp4xx, cns3xxx, davinci).
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33720
2012-10-11 07:59:06 +00:00
Felix Fietkau cae6f4ddb4 ixp4xx: enable OPTIMIZE_FOR_SIZE
Enabling OPTIMIZE_FOR_SIZE cuts the kernel binary down by 50K which is
critical for some small-footprint boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33679
2012-10-10 11:38:28 +00:00
Felix Fietkau f14b8d43f2 ixp4xx: add missing reboot handlers (fixes #11577)
SVN-Revision: 33672
2012-10-09 15:38:55 +00:00
Felix Fietkau bca070dfbe ixp4xx: update Gateworks Avila board support
Several new features for newer boards:
 - add additional UARTs present on some boards
 - add additional LEDs present on some boards
 - add HSS audio device codec present on some boards
 - add support for GSC present on some boards
 - add per model setup support for newer boards
 - set FLASH window per-model for boards with larger FLASH

Some fixes:
 - add IRQ mapping for additional PCI devices (USB Host)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33647
2012-10-07 23:23:47 +00:00
Felix Fietkau 22b86fec7c ixp4xx: patch cleanup
roll all avila patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33646
2012-10-07 23:23:43 +00:00
Felix Fietkau d660734a1b ixp4xx: Add HSS audio driver for Avila product family
Add ixp4xx HSS audio driver for Avila

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33645
2012-10-07 23:23:39 +00:00
Felix Fietkau ce692ed043 ixp4xx: update Gateworks Cambria board support
Several new features for newer boards:
 - add irq mapping for additional devices
 - add platform data for i2c bus to SFP modules
 - add additional UARTs present on some boards
 - increased R/W delay for expansion bus UARTs
 - add additional LEDs present on some boards
 - add GPIO exports and configuration
 - add ENET switch config present on some boards
 - add support for GSC present on some boards
 - added per model setup support for newer boards

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33644
2012-10-07 23:23:34 +00:00
Felix Fietkau 21d182b9e5 ixp4xx: patch cleanup
roll all cambria patches into a single patch (no code changes)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33643
2012-10-07 23:23:29 +00:00
Felix Fietkau d3567cc886 ixp4xx: split out new UART I/O to its own patch
This is being done for general cleanup

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 33642
2012-10-07 23:23:25 +00:00
John Crispin f3cab53f27 dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency
SVN-Revision: 33593
2012-09-28 21:54:31 +00:00
Florian Fainelli 18038c803c move ixp4xx-eth to target specific modules.mk
SVN-Revision: 32858
2012-07-25 15:50:23 +00:00
Florian Fainelli 4000de357e move crypto module to target specific modules.mk
SVN-Revision: 32856
2012-07-25 15:50:16 +00:00
John Crispin b891eec700 MI424WR - add rev D support
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

SVN-Revision: 32820
2012-07-24 20:38:36 +00:00
John Crispin a4d96aae8d bump to 3.3.8
SVN-Revision: 32055
2012-06-05 06:57:51 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Gabor Juhos 4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error
SVN-Revision: 31679
2012-05-12 10:49:23 +00:00
Gabor Juhos 500ec36515 ixp4xx: nuke 2.6.37 support
SVN-Revision: 31663
2012-05-09 10:48:44 +00:00
Gabor Juhos d25a4e7ddc ixp4xx: switch to 3.3
SVN-Revision: 31662
2012-05-09 10:48:43 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos bc2a7bfa70 ixp4xx: remove 2.6.3{2,8} and 3.0 support
SVN-Revision: 31414
2012-04-21 16:17:46 +00:00
Jonas Gorski 3a9b6dc313 kernel: update linux 3.3 to 3.3.2
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
Felix Fietkau 99768ccb7c ixp4xx: add support for linux 3.3.1
SVN-Revision: 31275
2012-04-13 13:38:49 +00:00
Felix Fietkau db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Felix Fietkau 8b91bad57e ixp4xx: fix a compile error
SVN-Revision: 30728
2012-02-25 22:12:11 +00:00
Imre Kaloz a832965eff add 3.0 support
SVN-Revision: 27493
2011-07-06 13:03:38 +00:00
Imre Kaloz a00596924b refresh patches
SVN-Revision: 27492
2011-07-06 12:57:51 +00:00
Rod Whitby 710409740e ixp4xx: Removed kmod-madwifi from the NSLU2 profile, as the NSLU2 has not wifi capability out of the box.
SVN-Revision: 27202
2011-06-17 11:22:22 +00:00
Felix Fietkau dcffeb99e2 ixp4xx: backport an upstream commit to fix gspca compile errors triggered by the buildbot
SVN-Revision: 26698
2011-04-16 21:30:48 +00:00
Hauke Mehrtens 50c743e79e kernel: Update to version 2.6.37.6
Thank you Peter Wagner for the patch

SVN-Revision: 26441
2011-04-03 13:59:07 +00:00
Imre Kaloz 4ee9074433 add 2.6.38 support
SVN-Revision: 26268
2011-03-22 15:04:17 +00:00
Imre Kaloz b8430e7427 update to 2.6.32.33 and 2.6.37.4
SVN-Revision: 26226
2011-03-18 13:25:32 +00:00
Hauke Mehrtens 4226f1d373 kernel: update to kernel version 2.6.37.3
SVN-Revision: 26126
2011-03-13 17:14:08 +00:00