950428fb1b
base-files: add a post start hook for procd managed services
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38024
2013-09-17 21:45:34 +00:00
b7f8f212ae
base-files: implement -l (--list-backup) sysupgrade parameter to list the files that would be backed up
...
SVN-Revision: 37627
2013-07-31 18:11:55 +00:00
2a1ccf1830
base-files: abort sysupgrade if file specified with --restore-config is not found
...
SVN-Revision: 37624
2013-07-31 14:10:34 +00:00
2771edf647
base-files: implement -T (--test) sysupgrade parameter to verify image without actually flashing it
...
SVN-Revision: 37620
2013-07-30 16:42:05 +00:00
3e54dbbf60
base-files: be verbose when entering failsafe due to a button being pressed
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37535
2013-07-25 20:28:36 +00:00
8d55ea10ad
base-files: add mtd_get_part_size helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37475
2013-07-20 09:25:49 +00:00
67f1d364b8
base-files/busybox: move ntpd init script from base-files to busybox
...
SVN-Revision: 37383
2013-07-17 22:24:45 +00:00
55178554c2
base-files: reject invalid uci keys in network_get_device() and related procedures ( #13886 )
...
SVN-Revision: 37345
2013-07-15 13:42:58 +00:00
b95bdc8ab5
kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37282
2013-07-14 12:56:58 +00:00
8eb56a88a4
procd: add a small script that handles config reloads until configd is ready
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37248
2013-07-11 17:00:54 +00:00
8069d87d3c
base-files: convert sysntpd init script to procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37244
2013-07-11 17:00:35 +00:00
06ae364c3d
base-files: run readlink on initscript name before opening services
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37241
2013-07-11 17:00:21 +00:00
523114e741
base-file: usbfs is no longer mounted under /proc/bus/usb
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37240
2013-07-11 17:00:17 +00:00
9e36e10cf7
base-files: add 2 missing variable defines
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37204
2013-07-08 16:35:02 +00:00
43a3d87b83
package: fix insmod on install
...
the procd changes broke the postinst insmod.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37015
2013-06-22 22:09:40 +00:00
4c43cacce0
base-files: module loading is now handled by ubox/kmodloader
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37003
2013-06-21 16:53:59 +00:00
d0db343fc4
base-files: /etc/init.d/rcS is no longer needed, procd handles this for us now
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37002
2013-06-21 16:53:55 +00:00
533dfc39e3
base-files: drop 2 pointless hotplug trigger stubs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37001
2013-06-21 16:53:51 +00:00
265a2deba3
base-files: network.sh: extend network_get_ipaddr6() / network_get_subnet6() to take ipv6-prefix-assignment into account, add further helper functions to fetch all ips of a given interface
...
SVN-Revision: 36942
2013-06-17 11:33:36 +00:00
33c620773d
base-files: remove unnecessary early sysctl-hack
...
SVN-Revision: 36920
2013-06-11 14:10:45 +00:00
e2f33bedfa
base-files: set default IPv6 forwarding value to 1
...
SVN-Revision: 36918
2013-06-11 13:30:18 +00:00
e078f649b5
procd: make the preinit rules wildcard all buttons for failsafe
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36896
2013-06-10 08:24:44 +00:00
1f52c5a72c
sysupgrade: create state file so procd knows when a sysupgrade is in progress
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36893
2013-06-10 08:24:31 +00:00
5e45a68a4a
base-files: fix failsafe via button press
...
entering failsafe by pressing a button during boot was broken for procd as init
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36891
2013-06-10 08:24:13 +00:00
9353e01af4
base-files: change PATH order
...
This allows packages to override busybox applets by placing the new
binaries in /usr/{sbin,bin}
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36890
2013-06-10 08:24:02 +00:00
3f67360012
base-files: use less entropy when generating ULAs
...
SVN-Revision: 36865
2013-06-06 09:52:00 +00:00
026271d03c
base-files: change network_find_wan() procedure to ignore default gateways in different routing tables
...
SVN-Revision: 36553
2013-05-06 09:33:56 +00:00
c7c243669c
sysupgrade: fixes broken pipe error during sysupgade
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36548
2013-05-05 12:41:42 +00:00
831c7ea04f
preinit: move cmdline failsafe= handling ot the generic code
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36430
2013-04-25 19:02:37 +00:00
811d90ff40
mount_root: prepare base-files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36429
2013-04-25 19:02:32 +00:00
39469dea7f
boot: make use of kmodloader if it is available
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36428
2013-04-25 19:02:28 +00:00
4e8f7f37ed
Change default IPv6 config to enable DHCPv6-PD
...
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
574bab45ac
base-files: firstboot: only ask for confirmation on TTY
...
Also allow '-y' to force the reset.
SVN-Revision: 36133
2013-03-27 12:39:42 +00:00
6bddf226d3
base-files: move sysctl init after boot
...
SVN-Revision: 36131
2013-03-26 10:02:58 +00:00
7aace3ee3e
base-files: fix bad start index in previous commit
...
SVN-Revision: 36130
2013-03-25 18:45:23 +00:00
acca7eadc4
package/base-files: change sysctl handling Move /etc/init.d/sysctl to index 00 and add hotplug script that applies interface specific sysctls for interfaces that only appear later - this allows to reliably configure per-interface parameters in sysctl.conf, e.g. to disable ipv6 autoconfig on a specific iface.
...
SVN-Revision: 36129
2013-03-25 18:43:30 +00:00
3810cc0f46
base-files: sysupgrade fail with eglibc
...
With eglibc, "ldd busybox" give us
libcrypt.so.1 => /lib/libcrypt.so.1 (0x774be000)
libm.so.6 => /lib/libm.so.6 (0x773e4000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x773c0000)
libc.so.6 => /lib/libc.so.6 (0x77276000)
/lib/ld.so.1 (0x774fe000)
Thus /lib/ld.so.1 is not printed by the libs fonction and isn't copied to the 'new' root before pivot root
libs() { ldd $* | awk '{print $3}'; }
https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/common.sh
With uclibc the last line of "ldd busybox" is
ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x77ada000)
Don't know for musl!
This patch replace https://dev.openwrt.org/changeset/19167 , as glibc is gone
The other way around is to rework libs()
Please apply the fix (mine or another) on trunk and AA
Might fix https://dev.openwrt.org/ticket/12273
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36107
2013-03-22 10:06:06 +00:00
ada74b8732
sysupgrade was broken as procd was getting killed
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36031
2013-03-14 18:43:58 +00:00
f43b7934d2
make basefiles aware of procd
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36003
2013-03-13 18:11:19 +00:00
29a3af1bb8
base-files: make firstboot ask for confirmation
...
To prevent accidential resets ask for confirmation (and default to n).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35712
2013-02-21 11:45:14 +00:00
6c627a266b
base-files: introduce commonly used helper functions for setting leds
...
Currently, most platforms define such helpers in their own diag.sh
implementation with almost identical code. By factoring out the
common ground it's possible to simplify maintainability and
homogenize the haptics over multiple platforms (so far as is
reasonably practicable, in a next step).
[juhosg:
- fix led_set_attr parameters in led_timer
- add led_morse and status_led_set_morse helpers
- add status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35648
2013-02-18 09:56:23 +00:00
c4f14fab9b
base-files: minor cosmetic corrections for functions.sh
...
- update copyright header
- remove superfluous shebang left-over from changeset 34794
- unify function declaration
[juhosg: keep Vertical Communications' copyright notice]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35646
2013-02-17 21:47:03 +00:00
5a8c63b47e
base-files: add macaddr_{add,2bin,setbit_la} helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35614
2013-02-16 11:50:22 +00:00
70d40b2ddd
base-files: add mtd_get_mac_{ascii,binary} helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35612
2013-02-16 11:50:19 +00:00
92ad26d1b6
base-files: Fix IPv6 early sysctls again * Kernel IPv6 /proc interface inconsistency caused races
...
SVN-Revision: 35417
2013-02-01 12:28:24 +00:00
ea7c9c85a8
base-files: Fix race-conditions with IPv6 sysctls
...
SVN-Revision: 35368
2013-01-29 10:13:33 +00:00
5f735b291f
base-files: remove IPv6-forwarding setting for all interfaces
...
SVN-Revision: 35344
2013-01-28 13:53:38 +00:00
231f8c2969
base-files: fix network_get_prefix6
...
SVN-Revision: 35300
2013-01-22 16:47:16 +00:00
e0a338c969
base-files: Set default value for IPv6 forwarding
...
SVN-Revision: 35299
2013-01-22 16:47:09 +00:00
John Crispin
Jo-Philipp Wich
Gabor Juhos
Luka Perkov
Felix Fietkau
Steven Barth
Jonas Gorski
Florian Fainelli