Gabor Juhos
|
6bfdc7c998
|
rtl8366s: reset the chip early, this allows ethernet to work as soon as possible
SVN-Revision: 19355
|
2010-01-27 21:01:48 +00:00 |
Gabor Juhos
|
49c4df5487
|
rtl8366: make it available on all platforms
SVN-Revision: 19329
|
2010-01-25 15:13:38 +00:00 |
Felix Fietkau
|
2bff4bf4e5
|
rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly
SVN-Revision: 18709
|
2009-12-09 03:25:33 +00:00 |
Felix Fietkau
|
ddc2e2270b
|
ar71xx: make the rtl8306 switch attach to eth0 instead of eth1 on the wrt160nl, fixes wan port detection (#6309)
SVN-Revision: 18699
|
2009-12-08 14:06:18 +00:00 |
Felix Fietkau
|
df35ee622f
|
fix link status detection in various switch drivers
SVN-Revision: 18698
|
2009-12-08 14:06:09 +00:00 |
Felix Fietkau
|
30e635c55b
|
move the updated version (for 2.6.30+) of ar8216/mvswitch to the generic files directory and remove patches for older kernel versions (no longer in use)
SVN-Revision: 17594
|
2009-09-16 12:24:46 +00:00 |
Felix Fietkau
|
6e28b28c5e
|
add a driver for rtl8306 switches
SVN-Revision: 17248
|
2009-08-14 00:52:17 +00:00 |
Felix Fietkau
|
3e7d58574f
|
ar8216: rename the vlan attribute to enable_vlan to keep it consistent with other drivers
SVN-Revision: 16770
|
2009-07-11 01:21:01 +00:00 |
Felix Fietkau
|
3455f00d7a
|
ar8216: fix transmission of large frames by setting the switch mtu
SVN-Revision: 16629
|
2009-06-29 21:54:16 +00:00 |
Felix Fietkau
|
c1918c778c
|
ar8216: add delay for page switching to work around register setting corruption. use packet mangling to fix up the vlan for incoming packets (workaround for hardware bug, which renders normal 802.1q support unusable)
SVN-Revision: 16442
|
2009-06-14 03:32:01 +00:00 |
Felix Fietkau
|
4e12c9d210
|
fix a crash in ip175c attribute enumeration
SVN-Revision: 15506
|
2009-04-30 13:57:22 +00:00 |
Felix Fietkau
|
a523450678
|
Add a driver for Atheros AR8216 switches Thanks to Vertical Communications, Inc. for providing access to the documentation
SVN-Revision: 15482
|
2009-04-29 13:02:41 +00:00 |
Felix Fietkau
|
8ec2ad91ad
|
swconfig: add a generic switch reset call
SVN-Revision: 15470
|
2009-04-28 19:16:17 +00:00 |
Felix Fietkau
|
3fce73ce46
|
clean up the ip175c driver some more, add support for setting the pvid and fix querying the phy status
SVN-Revision: 15308
|
2009-04-20 21:26:44 +00:00 |
Felix Fietkau
|
f6f55bae7d
|
swconfig: add a generic method for setting the port primary vlan id (used for transparently fixing up pvid for untagged port when setting vlan ports)
SVN-Revision: 15307
|
2009-04-20 21:26:39 +00:00 |
Felix Fietkau
|
4320a28228
|
add IC+ IP175C driver (based on Patrick Horn's driver, see #4050)
SVN-Revision: 15305
|
2009-04-20 18:57:55 +00:00 |
Felix Fietkau
|
787e9fcf93
|
swconfig: treat struct switch_attr as constant
SVN-Revision: 15302
|
2009-04-20 18:57:36 +00:00 |
Felix Fietkau
|
cd80e16a80
|
swconfig: remove old debugging stuff
SVN-Revision: 15301
|
2009-04-20 18:57:30 +00:00 |
Felix Fietkau
|
1929c7511c
|
mvswitch: re-enable header mode
SVN-Revision: 15186
|
2009-04-10 11:33:49 +00:00 |
Felix Fietkau
|
bfa8064ccd
|
atheros: in later kernels, vlan 0 no longer works as expected, switch to (1,2) instead of (0,1) for lan/wan
SVN-Revision: 14981
|
2009-03-22 20:19:23 +00:00 |
Felix Fietkau
|
f972eb41b5
|
mvswitch,adm6996: use phy fixups instead of a nonstandard patch for hardware detection
SVN-Revision: 14977
|
2009-03-22 20:18:36 +00:00 |
Felix Fietkau
|
d1b986bd54
|
improve routing/nat performance for devices using the marvell 88e6060 switch
SVN-Revision: 13060
|
2008-10-28 17:54:22 +00:00 |
Felix Fietkau
|
1e570a9288
|
change the way ./files* and the generic kernel files are applied. ./files now applies to *ALL* kernel versions, and is copied along with ./files-* - this gets rid of quite a bit of redundancy in the extra kernel drivers.
SVN-Revision: 13010
|
2008-10-18 21:43:30 +00:00 |
Felix Fietkau
|
c7150f281c
|
add missing defines for mvswitch
SVN-Revision: 11895
|
2008-07-21 18:12:38 +00:00 |
Felix Fietkau
|
3ad51a1c33
|
some more mvswitch fixes: - initialize the vlan destination map properly - workaround for moving node bug: clear the ATU database on every PHY poll
SVN-Revision: 11881
|
2008-07-19 23:09:56 +00:00 |
Felix Fietkau
|
87e673487a
|
add extra safety for the packet mangling in the mvswitch driver
SVN-Revision: 11880
|
2008-07-19 23:09:43 +00:00 |
Felix Fietkau
|
b014357704
|
set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues
SVN-Revision: 11410
|
2008-06-09 10:31:46 +00:00 |
Felix Fietkau
|
9e0ee80132
|
enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
SVN-Revision: 10975
|
2008-04-29 12:55:44 +00:00 |
Felix Fietkau
|
c3fcb26d47
|
allow bigger packets in the marvell switch (does not fix the mtu problems yet)
SVN-Revision: 10970
|
2008-04-28 21:59:06 +00:00 |
Felix Fietkau
|
86bbc820d5
|
fix vlan mapping for cpu port on the marvell switch
SVN-Revision: 10934
|
2008-04-24 01:09:47 +00:00 |
Felix Fietkau
|
69999abeda
|
clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
SVN-Revision: 10931
|
2008-04-23 16:28:05 +00:00 |
Felix Fietkau
|
11d94ce083
|
Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
SVN-Revision: 10876
|
2008-04-20 08:29:01 +00:00 |
Felix Fietkau
|
a323a7bf2a
|
Add stub driver for ADM6996F switches (configured through MII) The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a
SVN-Revision: 10869
|
2008-04-20 02:53:04 +00:00 |