Commit Graph

1093 Commits (d140648622639c4508f715dbd2d72088bdb49c81)

Author SHA1 Message Date
Rafał Miłecki 2187f57db6 base-files: add ucidef_set_led_usbport for full usbport support
This helper allows using usbport trigger directly. It requires usbport
compatible syntax and supports specifying multiple USB ports, e.g.:
ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1"

This adds a proper object to the board.json, e.g.
"usb": {
	"name": "USB",
	"type": "usbport",
	"sysfs": "devicename:colour:function",
	"ports": [
		"usb1-port1",
		"usb2-port1"
	]
}
and supports translating it into uci section.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-22 11:16:01 +02:00
Rafał Miłecki 0658527e1e switch to the new usbport LED trigger
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 12:09:45 +02:00
Pierre Lebleu 6bb11d52f3 procd: Allow initscripts to start one daemon instance at a time
Signed-off-by: Pierre Lebleu <pierre.lebleu@technicolor.com>
2016-10-18 08:53:38 +02:00
Koen Vandeputte 0f27096100 base-files: also generate configs when current is empty (FS#193)
Before a configuration is generated, an empty file is created to store
it in. (required by UCI)

If something happens during config generation
(power cut, interruption, ..) an empty file exists and it is never
regenerated again, causing some daemons to fail starting
(NTPD, logread, ..)

Fix this by also generating new configs if a critical file
is empty.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-10-05 19:59:11 +02:00
Christian Lamparter 5a8a986dd5 base-files: remove non-working filter option for wifi detect
This patch removes the non-working wifi driver filter for
the wifi detection script.

I figured that rather than replacing ${2:-$DRIVERS} with
${1:-$DRIVERS}, it would be better to remove it. Nobody
needed it in the previous years.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-04 11:50:48 +02:00
Matthias Schiffer 26b4216f95
base-files: make default_prerm work offline
IPKG_INSTROOT must be respected for offline removal (used for per-device
rootfs).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-26 17:57:57 +02:00
Matthias Schiffer 6c1542787d
base-files: fix check for empty password warning
Now that we know that the password is in /etc/shadow and not in
/etc/passwd, we can properly fix the logic for the empty password check.
Only 'root::' is an empty password, 'root' and 'root:!:' allow no
password login at all.

This fixes the empty password warning still showing after the root password
has been locked using 'passwd -l root' (e.g. to allow public-key auth
only).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-26 17:57:56 +02:00
Jo-Philipp Wich 1c09849f6c treewide: remove bad local shell variable declarations
Local variable declarations outside of functions are illegal since the Busybox
update to v1.25.0, therfore remove them from the appropriate places.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-09-24 14:38:20 +02:00
Florian Fainelli ef64c8694b base-files: Allow subtargets to define base-files.mk
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-09-19 19:42:10 +02:00
John Crispin 63bd73a5cf base-files: remind users to set root password
print a warning when a shell spawns, telling users to set a root password.

Signed-off-by: John Crispin <john@phrozen.org>
2016-09-19 15:30:32 +02:00
Felix Fietkau 25dab5d217 base-files: reduce vm.min_free_kbytes for devices with 32M RAM
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-16 16:44:45 +02:00
Karl Palsson ad8d197b82 base-files: support oneshot leds properly.
oneshot trigger configurations for LEDs are created, but the on/off
timing configurations are ignored.  generate_config is correctly creating
oneshot configs, but the later led script doesn't recognise the trigger
details.

Fixes: c0c3f2d4c9 leds: support oneshot as well as timer triggers
Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-09-05 07:27:15 +02:00
Jonas Gorski 30352e72ff base-files: set pi_ifname in board.d case to fix deconfig
Due to an empty pi_ifname in the generic failsafe setup, the deconfig
never removed the failsafe networking interface, causing broken
networking later on.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-14 23:10:17 +02:00
Jonas Gorski 6c9588ddf5 base-files: configure switch in failsafe
Also configure the switch based on the failsafe config, and create the
failsafe interface as tagged if necessary.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:15 +02:00
Jonas Gorski 072cf26729 base-files: allow failsafe to configure vlans
In preparation of properly setting up vlans and switches, add
support for configuring failsafe on a vlan tagged interface.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:06 +02:00
Jonas Gorski c18edcec45 base-files: add preinit ifname detection based on board.json
Make use of the existing board.d to autodetect lan ifname in a generic way.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:50:00 +02:00
Jonas Gorski 0f1ae840c9 base-files: split out preinit interface config
Move preinit interface and ip config to its own function to allow
calling it from more than one place.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:56 +02:00
Jonas Gorski 780ccbf9f1 base-files: board_detect: allow specifying the generated file
Allow passing a filename to change the location of the generated
board.json.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:51 +02:00
Jonas Gorski e934a129f0 base-files: let config_generate call board_detect
Instead of board_detect generating the config as a side effect, let
config_generate call board_detect as needed.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-08-13 15:49:46 +02:00
Mathias Kresin 5fadd4397b preinit: use only the image config options
The pi_* variables and the fs_failsafe_wait_timeout variable are set by
the CONFIG_TARGET_PREINIT_* config options. No need to maintain the same
values twice.

All other fs_ variables were never used.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-10 03:04:08 +02:00
Felix Fietkau 577f873daf kernel: remove unused morse led trigger driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Mathias Kresin 3004298e62 sysupgrade: unmount filesystems before reboot
sysupgrade immediately reboots after flashing an image and doesn't
allow to unmount filesystems. At least in case the image used for
sysupgrade is stored on a FAT formatted usb flash drive, the following
warning is printed during the next mount of the flash drive:

FAT-fs (sda1): Volume was not properly unmounted. Some data may be
corrupt. Please run fsck.

Although a data corruption during read operations is unlikely, there is
no need to scare the users.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-04 18:19:46 +02:00
Daniel Golle 877168993a base-files: remove dead code
/etc/init.d/boot tried to create /dev/root based on the kernel's
cmdline which won't work on any recent targets. Remove that code now
that fstools can detect the mounted rootfs based on
/proc/self/mountinfo and /dev/root was long gone anyway.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-08-04 18:19:46 +02:00
Felix Fietkau 5c9cc7b7f8 base-files: increase vm.min_free_kbytes
Network drivers typically allocate memory in atomic context. For that to
be reliable, there needs to be enough free memory. Set the value
heuristically based on the total amount of system RAM.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 14:53:27 +02:00
Conn O'Griofa e1406cd31a base-files: sysupgrade: fix pseudobridge upgrades
Treat 'relayd' as an essential service to avoid connection interruptions during sysupgrade on devices configured as a pseudobridge.

Signed-off-by: Conn O'Griofa <connogriofa@gmail.com>
2016-07-24 06:54:40 +02:00
Etienne CHAMPETIER 35e423ca41 base-files: use procd init for urandom_seed
Previous implementation was blocking the init and
breaking halt/reboot/sysupgrade (reported by Daniel Golle)

v2: use procd logging, use set -e + trap for error handling

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
2016-07-27 01:24:54 +02:00
Felix Fietkau 5fd2eabeb2 base-files: remove support of profile-specific base-files
It is incompatible with multi-profile builds and has not been used
in-tree anyway.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-26 08:26:24 +02:00
Etienne CHAMPETIER 3946a55291 base-files: seed /dev/urandom
This commit:
1) seed /dev/urandom with the saved seeds as early as possible
   (see /lib/preinit/81_urandom_seed)
2) save a seed at /etc/urandom.seed if it doesn't exists
3) save a new seed each boot at "system.@system[0].urandom_seed"
   (see /etc/init.d/urandom_seed)

We use getrandom() so we are sure /dev/urandom pool is initialized

Seed size is 512 bytes (ie /proc/sys/kernel/random/poolsize / 8)
it's the same size as in ubuntu 14.04 and all systemd systems

Seeding /dev/urandom doesn't change entropy estimation, so we still have
"random: ubus urandom read with 4 bits of entropy available"
messages in the logs, but we can now ignore them if
after "urandom-seed: Seeding with ..." message

Saving a new seed on each boot is disabled by default to avoid too much
writes without user consent

v2: log preinit messages to /dev/kmsg
v3: use non generic function name for logging, as /lib/preinit/ files
    are all sourced together in /etc/preinit
v4: after a lot of discussion on the ML, use a uci config param
v5: config param is now the path of the seed

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-06-30 22:48:39 +02:00
Jo-Philipp Wich 8d51706616 base-files: use LEDE NTP vendor pool
The vendor NTP pool for the LEDE project got approved, so switch to it now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-28 19:14:31 +02:00
Kevin Darbyshire-Bryant d4ede1c118 base-files: sysfixtime no longer exclude dnsmasq.time
dnsmasq's dnssec time checking method now uses a ntp hotplug mechanism,
therefore dnsmasq.time is redudant and no longer needs to be explicitly
excluded from sysfixtime.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-24 13:56:30 +02:00
Daniel Dickinson f954f4337b base-files: Add standard os-release file
/etc/os-release is the standard distribution release information
file, therefore add it (and image configuration options for
fields not previously present in LEDE).  Once it is deemed
reasonable the non-standard openwrt_release, openwrt_version,
and device_info files could be removed (that is with this patch
we consider them deprecated in favour of the standard file).

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-06-24 13:52:53 +02:00
John Crispin 87eb8fad13 base-files: remove fstab symlink
the symlink no longer gets used since we switched to the block-mount tool.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
Hannu Nyman df7581e4c0 base-files: increase default system log size to 64 kB
Increase the default system log buffer size
from 16 kB (built-in default in ubox logd)
to 64 kB by setting the option in /etc/config/system.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-06-07 23:13:29 +02:00
Jo-Philipp Wich 35b33f0413 base-files: maintain LED config state
Record the state of any hardware LED configured through UCI and use that
information to revert the state when applying updated settings while
maintaining default behaviour of system LEDs.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 10:34:50 +02:00
Felix Fietkau d6ad9d3e9c base-files: fix /bin/config_generate breakage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 07:32:30 +02:00
Jo-Philipp Wich 924302ba36 base-files: drop /etc/config/system
The board_detect framework is now able to create the entire system config from
scratch so we can finally drop the copy shipped by base-files.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:34:02 +02:00
Jo-Philipp Wich b98f78b1c1 base-files: rework config generation logic
Now that config_generate is able to generate the entire /etc/config/system
from scratch we can apply the same logic as used for /etc/config/network;
when the configuration file exists already then do not do anything, else
generate it from the values provided by /etc/board.json .

In order to facilitate that move the file existance checking inside
/bin/config_generate and call it unconditionally from /bin/board_detect.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:34:02 +02:00
Jo-Philipp Wich 07f03d0833 base-files: support port_state LED types in board.d
Add support for handling port_state LEDs as used by ADM5120.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
Jo-Philipp Wich 528b8f6f93 base-files: support hostname and ntp servers through board.d
Add support for specifying hostname and NTP servers via /etc/board.d/ scripts.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
Jo-Philipp Wich 33a4d22f4c base-files: reset LED state
Attempt to reset all LED states before applying the UCI configuration to
avoid leaving disabled LEDs behind in lingering glowing state, e.g. when
changing the sysfs entry in the config from one hardware LED to another.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-07 23:01:58 +02:00
Jo-Philipp Wich 7f69458296 base-files: rework postinstall uci-defaults handling
Some package postinstall operations, e.g. those emitted by the LuCI build
system, source and delete the uci-defaults themselves upon package insteall,
causing the generic defaults apply code to trigger shell errors like:

    .../luci-app-ddns.postinst: .: line 130: can't open './40_luci-ddns'

Rework the generic apply code to check the existence of the uci-defaults
script before trying to source it, use sed to prefilter the list of entries
from the control file and perform the directory change in a subshell,
avoiding the need for cd $OLDPWD.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-27 10:27:45 +02:00
Jo-Philipp Wich 1012701014 x86: generalize partition discovery for sysupgrade
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 13:30:58 +02:00
Hannu Nyman 3193053df7 Centralize setting of all version info to include/version.mk
Centralize setting all version information in include/version.mk
* Set RELEASE env variable in include/version.mk instead of toplevel.mk.
  Stop exporting the variable.
* Remove hardcoded release name from /etc/banner

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-05-24 13:30:58 +02:00
John Crispin a39ac242cc base-files: fix some failsafe issues
* if the shell was closed booting continued

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
Kevin Darbyshire-Bryant 8d105653b1 base-files: sysfixtime typo in exclude dnsmasq.time
Typo, missing space before ] in previous commit caused shell syntax
failure and incorrect restoration of time.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-19 18:14:28 +02:00
Kevin Darbyshire-Bryant 2b1556d3e0 base-files: sysfixtime exclude dnsmasq.time
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps.  By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past.  Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.

In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.

Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-19 10:28:18 +02:00
Jo-Philipp Wich 21f460e0c1 Revert "base-files: sysfixtime exclude dnsmasq.time"
This reverts commit 382779e009.

Reverting this commit due to a missing Signed-off-by.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-19 10:28:11 +02:00
Kevin Darbyshire-Bryant 382779e009 base-files: sysfixtime exclude dnsmasq.time
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps.  By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past.  Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.

In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.

Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.
2016-05-18 22:17:33 +02:00
Vittorio G (VittGam) d742e1b513 base-files: Enhancements to /etc/profile
- Update the terminal window title with the current directory and hostname, if using an xterm-compatible terminal emulator.
- Add ll, an useful alias to ls.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
2016-05-14 16:53:10 +02:00
Vittorio Gambaletta (VittGam) 40f933d7ff base-files: Fix config_generate when there are no switch VLANs or ports configured in board.json.
The json_select call fails when there are no roles or ports objects in board.json. "json_select .." must not be executed after failing.

This fixes for example LEDs not being set up in /etc/config/system.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
2016-05-11 17:06:54 +02:00